Oti Dali 35/220-240/400 D Lt2 L Intelligent – DALI-2 LEDset (SELV) 4052899494220

OTi DALI 35/220-240/400 LT2 L
OPTOTRONIC Intelligent – DALI LEDset LT2 (SELV)

Peace of mind - intelligent, future proof, wide range of usage

A wide operating window of up to from as low as 0.075A up to 0.4A and an efficiency of up to 92% mark some highlights of this linear LED driver. It is fully digitally programmable by DALI and LT2 and offers 1…100% DALI dimming. This device is also suitable for emergency lighting units.

Designed in Italy & Germany and manufactured in Bulgaria. Backed by a lifetime that can reach as much as 100000h.

Product family features:
Line frequency: 0 Hz | 50 Hz | 60 Hz
Versatile DALI window driver up to 90 W due to flexible output characteristic
Supply voltage: 220-240 V
Available with output current range: up to 1050 mA
Constant Lumen Output (CLO)
Integrated customizable thermal management (Driver Guard)
DALI-2 certified (Part -101,-102 and -207)

Product family benefits:
Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.25 W
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection

Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance

Areas of application:
Linear lighting for office, education, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I

Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Total harmonic distortion: < 10 %
Power factor λ: 0.38C-0.95
Efficiency in full-load: 92 %
Device power loss: 4.0 W
Networked standby power: <0.25 W
Inrush current: 17 A
Max. ECG no. on circuit breaker 10 A (B): 18
Max. ECG no. on circuit breaker 16 A (B): 28
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Protective conductor current: 0.29 mA
Nominal output voltage: 54-240 V
U-OUT (working voltage): < 250 V
Nominal output current: 75-400 mA
Default output current: 35 mA
Output current tolerance: ±3 %
Output ripple current (100 Hz): < 1 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Output current LEDset open: 35 mA
Output current LEDset shorted: 75 mA
Nominal output power: 4-37 W
Maximum output power: 37 W
Galvanic isolation primary/secondary: not relevant

Dimensions & weight:
Product weight: 205.00 g
Length: 280.0 mm
Width: 30.0 mm
Height: 21.0 mm
Mounting hole spacing, length: 270.0 mm
Mounting hole spacing, width: not relevant mm
Cable cross-section, input side: 0.5-1.5 mm²
Cable cross-section, output side: 0.5-1.5 mm²
Wire preparation length, input side: 8.5-9.5 mm
Wire preparation length, output side: 8.5-9.5 mm
Cable/wire length, output side: 2000 mm

Colors & materials:
Casing material: Metal
Product color: White

Temperatures & operating conditions:
Ambient temperature range: -25 +60 °C
Maximum temperature at tc test point: 75 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -25 +85 °C
Permitted rel. humidity during operation: 5-85 %

Lifespan:
ECG lifetime: 50000 / 100000 h

Additional product data:
Encapsulated: No

Capabilities:
Programming interface: DALI, LEDset
Control interface: DALI
Dimmable: Yes
Dimming interface: DALI-2 / Corridor / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method: Full analogue dimming
DALI-2 Diagnostic Data: Yes
DALI-2 Energy Data: Yes
Constant lumen function: Programmable
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot.: class I
Suitable for emergency lighting: Yes
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Number of channels: 1
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
Intended for no-load operation: No
No-load proof: Yes

Programming:
Programming device: DALI magic
Tuner4TRONIC: Yes
Tuner4TRONIC Field App: Yes

Programmable features:
DALI Settings: Yes
DALI-2 Luminaire Data: Yes
TouchDIM + Sensor: Yes
Corridor Functionality: Yes
Emergency Mode: Yes

Certificates & standards:
Approval marks – approval: CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / BIS / RCM
Standards: Acc. to EN 61347-1 / Acc. to EN 61347-2-13 / Acc. to EN 55015 / Acc. to EN 61547 / Acc. to EN 61000-3-2 / Acc. to EN 62384 / Acc. to EN 62386
Type of protection: IP20

Logistical data:
Commodity code: 85044083900

Environmental information:
Date of Declaration: 25-10-2024
Primary Article Identifier: 4052899957053 | 4052899494220 | 4062172082129 | 6977770436688
Declaration No. in SCIP database: In work
SCIP_STATUS: In work