Led Driver Ote 35/220-240/700 Phasecut 4008321825520
Osram
Part No
LEDOTE35700PC
OTe 35/220-240/700 PC
Product benefits:
Compact housing for mounting in very tight spaces
Compatible with the most common leading-edge and trailing-edge phase dimmers
Product features:
Dimmable via leading edge/trailing edge
Areas of application:
Optional cable clamp E-style for independent mounting (to be ordered separately)
Suitable for indoor installations
Partial load: 19 - 35 W
Input voltage AC: 198 - 264 V
Mains frequency: 50 - 60 Hz
Nominal output voltage: 27 - 50 V
Nominal output current: 700 mA (+/- 10%)
Nominal voltage: 220 - 240 V
Device power losses (max): 7.0 W
Power factor λ (full/minimum load at 230 V): 0.95/ 0.9
ECG efficiency (full load at 230 V): 85 %
Inrush current: < 10 A
Max. no. of ECGs on circuit breaker 10 A: 40
Max. no. of ECGs on circuit breaker 16 A: 65
Galvanic isolation primary/secondary (SELV equivalent): 3.75 kV
Surge capability (L-N): 1 kV
Length: 153 mm
Width: 54 mm
Height: 36 mm
Product weight: 165 g
Cable cross-section, input side: 0.75 - 2.5 sqmm (flexible/solid leads)
Cable cross-section, output side: 0.5 - 2.5 sqmm (flexible/solid leads)
Wire preparation length, input side: 5.0 mm
Casing material: Plastic
Ambient temperature range: -20 +45 C
Temperature range at storage: -40 +85 C
Maximum temperature at tc test point: max. +75 C
Max.housing temperature in case of fault: 110 C
ECG lifetime (at Tcase = 70 C at Tc point/10-% failure rate) : 50000 h
Dimmable: Yes
Dimming range: 10 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming interface: Phase Cut (Leading edge/Trailing edge)
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Type of protection: IP20
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Approval marks - approval: CE / ENEC 10 / VDE / CB
Orange cable clamp included with the driver. This allows independent mounting of the driver.
EAN: 4008321825520
Compact housing for mounting in very tight spaces
Compatible with the most common leading-edge and trailing-edge phase dimmers
Product features:
Dimmable via leading edge/trailing edge
Areas of application:
Optional cable clamp E-style for independent mounting (to be ordered separately)
Suitable for indoor installations
Electrical Data:
Nominal output power: 35 WPartial load: 19 - 35 W
Input voltage AC: 198 - 264 V
Mains frequency: 50 - 60 Hz
Nominal output voltage: 27 - 50 V
Nominal output current: 700 mA (+/- 10%)
Nominal voltage: 220 - 240 V
Device power losses (max): 7.0 W
Power factor λ (full/minimum load at 230 V): 0.95/ 0.9
ECG efficiency (full load at 230 V): 85 %
Inrush current: < 10 A
Max. no. of ECGs on circuit breaker 10 A: 40
Max. no. of ECGs on circuit breaker 16 A: 65
Galvanic isolation primary/secondary (SELV equivalent): 3.75 kV
Surge capability (L-N): 1 kV
Length: 153 mm
Width: 54 mm
Height: 36 mm
Product weight: 165 g
Cable cross-section, input side: 0.75 - 2.5 sqmm (flexible/solid leads)
Cable cross-section, output side: 0.5 - 2.5 sqmm (flexible/solid leads)
Wire preparation length, input side: 5.0 mm
Casing material: Plastic
Ambient temperature range: -20 +45 C
Temperature range at storage: -40 +85 C
Maximum temperature at tc test point: max. +75 C
Max.housing temperature in case of fault: 110 C
ECG lifetime (at Tcase = 70 C at Tc point/10-% failure rate) : 50000 h
Dimmable: Yes
Dimming range: 10 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming interface: Phase Cut (Leading edge/Trailing edge)
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2 m
Type of protection: IP20
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Approval marks - approval: CE / ENEC 10 / VDE / CB
Type of LED Driver | Constant Current |
---|---|
Type of Control/Dimming | Mains (Phase-cut) |
Weight | 5.82oz |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify