Led Driver Ot Dali2 15/220-240/1A0 Lt2 4062172143912

Osram Led Driver Ot Dali2 15/220-240/1A0 Lt2 4062172143912

Optional orange cable clamp F-style, for independent mounting of the driver, to be ordered separately

Product family benefits
Versatile DALI window driver due to flexible output characteristic
Very high efficiency
Protection of the system thanks to thermal management and Smart Control
High-quality dimming of 1…100 % by amplitude dimming

Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Areas of application:
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II
Suitable for downlights, spotlights and LED panels
Installation via Cable Clamp Kit possible (depending on version of product)

Electrical data:
Nominal input voltage: 220…240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198…264 V
Input voltage DC: 176…276 V
Total harmonic distortion: < 10 %
Power factor λ: 0.95
Efficiency in full-load: 88 %
Device power loss: 2.4 W
Networked standby power: ≤0.30 W
Inrush current: 5 A
Max. ECG no. on circuit breaker 10 A (B): 82
Max. ECG no. on circuit breaker 16 A (B): 130
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 7.5…54 V
U-OUT (working voltage) : 60 V
Nominal output current: 150…1050 mA
Output current LEDset open: 75 mA
Output current LEDset shorted: 350 mA
Default output current: 350 mA
Output current tolerance: ±3 %
Output ripple current (100 Hz): < 2 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Nominal output power: 18 W
Maximum output power: 18 W
Galvanic isolation DALI/output: SELV
Galvanic isolation DALI/mains: Basic
Galvanic isolation primary/secondary: SELV

Dimensions & weight:
Product weight: 100.00 g
Cable cross-section, input side: 0.2…1.5 mm²
Cable cross-section, output side: 0.2…1.5 mm²
Wire preparation length, input side: 8.0…9.0 mm
Wire preparation length, output side: 8.0…9.0 mm
Length: 95.0 mm
Width: 53.0 mm
Height: 30.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…+50 °C
Maximum temperature at tc test point: 75 °C
Max.housing temperature in case of fault: 100 °C
Temperature range at storage: -25…85 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 50000 / 100000 h

Additional product data:

Successor EAN: 4062172143912
Predecessor EAN: 4052899324879

Capabilities:
Dimmable: Yes
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
Dimming range: 1…100 %
Dimming method: Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I / II
Suitable for emergency lighting: Yes
Type of connection, output side: Push terminal
Programming interface: DALI, LEDset
DALI-2 Energy Data: Yes
Number of channels: 1
DALI-2 Diagnostic Data: Yes

Programming
Tuner4TRONIC Field App: No
Programming device: DALI / LEDset

Programmable features
Lamp Operating Time: Yes
Driver Guard: No
DALI Settings: Yes
Emergency Mode: Yes
DALI-2 Luminaire Data: Yes
Configuration Lock: No
Soft Switch Off: Yes
Dim to Dark: No
TouchDIM + Sensor: Yes
Corridor Functionality: Yes
OEM Key: Yes

Certificates & standards:
Approval marks – approval: ENEC 10 / VDE / EMC / EL / CE
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Protection class: II
Type of protection: IP20

Logistical data:
Commodity code: 850440829000

Environmental information:
Date of Declaration: 10-11-2021
Primary Article Identifier: 4052899324879 | 4062172143912
Candidate List Substance 1: Lead
CAS No. of substance 1: 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 08ca3009-16b1-4104-8382-194565783c1f | e9ec3393-37eb-446a-b083-3425ba8b180d