Led Driver Ot 40/220-240/24 Dim P 24v 40w 4052899545823

Osram

Part No
LEDOT4024DIMP
CV Power supplies 24 V with 1-10 V

Product benefits:
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %

Product features:
DC mode functionality
Type of protection IP66 and IP67
Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range -30 +55 C
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface

Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations

EAN: 4052899545823
Nominal voltage: 220-240 V
Mains frequency: 0-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 15 %
Power factor: 0.95
ECG efficiency: 85 %
Device power loss: 6 W
Power loss in stand-by mode: <0.5 W
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 35
Max. ECG no. on circuit breaker 16 A (B): 57
Max. ECG no. on circuit breaker 25 A (B): 87
Surge capability (L-N): 4 kV
Nominal output voltage: 24.2 V
U-OUT (working voltage): 30 V
Nominal output power: 40 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Length: 208 mm
Width: 43 mm
Height: 26 mm
Mounting hole spacing, length: 199 mm
Product weight: 416 g
Cable cross-section, input side: 1.0 sqmm
Cable cross-section, output side: 1.0 sqmm
Wire preparation length, input side: 90 mm
Wire preparation length, output side: 90 mm
Cable/wire length, control input: 320 mm
Cable/wire length, input side: 300 mm
Cable/wire length, output side: 300 mm
Casing material: Plastic
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: Yes
Dimmable: Yes
Dimming interface: 1-10 V
Dimming range: 1-100 %
Dimming method: Pulse Width Modulation
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
No-load proof: Yes
Suitable for fixtures with prot. class: II
Type of connection, output side: Cables
Number of channels: 1
Approval marks: ENEC/RCM/CCC/EAC
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Protection class: II
Type of protection: IP66
Temperature range at storage: -40 +85 C
Technical Information
Weight 1.1lbs
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver Ot 40/220-240/24 Dim P 24v 40w 4052899545823
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify