Led Driver Ot 100/220-240/24 Dim P 24v 100w 4052899545861
Osram
Part No
LEDOT10024DIMP
CV Power supplies 24 V with 1-10 V
Product benefits
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %
Product features
DC mode functionality
Type of protection IP66 and IP67
Surge protection up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range -30 +55 C
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface
Areas of application
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations
EAN: 4052899545861
Nominal voltage: 220-240 V
Mains frequency: 0-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 15 %
Power factor: 0.95
ECG efficiency: 90 %
Device power loss: 10 W
Power loss in stand-by mode: <0.5 W
Inrush current: 60 A
Max. ECG no. on circuit breaker 10 A (B): 10
Max. ECG no. on circuit breaker 16 A (B): 16
Max. ECG no. on circuit breaker 25 A (B): 26
Surge capability (L-N): 4 kV
Nominal output voltage: 24.2 V
U-OUT (working voltage): 30 V
Nominal output power: 100 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
nput voltage DC: 176-276 V
Length: 240 mm
Width: 50 mm
Height: 34 mm
Mounting hole spacing, length: 227 mm
Product weight: 765 g
Cable cross-section, input side: 1.0 sqmm
Cable cross-section, output side: 1.0 sqmm
Wire preparation length, input side: 90 mm
Wire preparation length, output side: 90 mm
Cable/wire length, control input: 320 mm
Cable/wire length, input side: 300 mm
Cable/wire length, output side: 300 mm
Casing material: Plastic
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 80 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: Yes
Dimmable: Yes
Dimming interface: 1-10 V
Dimming range: 1-100 %
Dimming method: Pulse Width Modulation
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, output side: Cables
Number of channels: 1
Approval marks: ENEC/RCM/CCC/EAC
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Protection class: I
Type of protection: IP66/IP67
Temperature range at storage: -40 +85 C
Commodity code 850440829000
| Type of LED Driver | Constant Voltage |
|---|---|
| Type of Control/Dimming | 1-10V |
| Weight | 2lbs |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify