Series 7 Pallet Cushion (No T-Nut, Yellow) - From 20kg to 36kg

Yellow Series 7 Air-Dampened Pallet Cushions without T-Nut 

Use Spacer 7228 (Spacer and Bolt Not Included) 

Cushion + Spacer = 102mm (4”) 
Cushion Height: 73mm 
Load Capacity: 20kg - 36kg

Our Pallet Cushions are the most economical and reliable way to replace and upgrade wooden skid runners on pallet crates, eliminating the need for costly air-ride trucks, these air-dampened polyethylene cushions are easily attached to pallets or crates to provide a high level of protection from shock and vibration. 

Don’t risk shipment damage by shocks, drops, and impact during transit or handling. 

Easy to Install 
The pre-installed t-nut, with M8 thread, protrudes out of the cushions for easy location into the mounting hole and fast installation. (Also available with 5/16”-18 UNC threaded t-nut or without t-nut) 
The pallet cushions are mounted directly on a pallet or container base with a simple bolt. 

Reusable 
The pallet cushions can be easily removed and mounted again on another pallet. 

Simple and Practical 
Our Series 7 Pallet Cushions, once fitted with the 7228 Spacer, create a four-way 4” space under the pallet, which makes it easy to load and unload with a pallet jack and forklift. 

Textured 
Finish The Series 7 Pallet Cushions has a textured finish for a better grip. 

Resistant and Durable 
Our Pallet Cushions have been through rigorous stress tests. They can be dragged on concrete and joints for 3000 feet, at maximum load, with only minimal wear noted. Suitable for use between -40°C to + 54°C and chemical resistant.