Led Driver Oti Dali 35/220-240/700 Lt2 L G2 4052899551763
Osram
Part No
LEDOTIDALI35700G2
OTi DALI 35/220-240/700 LT2 L G2
OPTOTRONIC Intelligent - Dimmable DALI Constant Current
Product family benefits:
Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W *
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application:
Linear lighting for office, education, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I
Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance
EAN: 4052899551763
Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Current set: DALI / LEDset / Programmable
Total harmonic distortion: < 15 %
Power factor: > 0.95
ECG efficiency: up to 90 %
Device power loss: 4.0 W
Power loss in stand-by mode: <0.15 W
Protective conductor current: <0.5 mA
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 24
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 15-54 V
U-OUT (working voltage): < 60 V
Nominal output current: 200-700 mA
Output current LEDset open: 100 mA
Output current LEDset shorted: 700 mA
Default output current: 100 mA
Output current tolerance: +/- 3 %
Output ripple current (100 Hz): < 1 %
Output PSTLM: <= 1
Output SVM: <= 0.4
Nominal output power: 4-37 W
Galvanic isolation: SELV
Dimensions & weight
Mounting hole spacing, length: 350.0 mm
Product weight: 240.00 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.0-9.0 mm
Wire preparation length, output side: 8.0-9.0 mm
Height: 21.0 mm
Width: 30.0 mm
Length: 360.0 mm
Colors & materials
Casing material: Metal
Temperatures & operating conditions
Ambient temperature range: -25 +50 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
Lifespan
ECG lifetime: 50000 / 100000 h
Capabilities
Programming interface: DALI, LEDset
Dimmable: Yes
Dimming interface: DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method
Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Non-reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Number of channels: 1
Control interface: DALI
Programming
ProgrammingTuner4TRONIC Field App: Yes
Programming device: DALI magic
Constant Lumen: Yes
Certificates & standards
Approval marks – approval: CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / RCM / BIS
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection: IP20
Commodity code: 850440829000
OPTOTRONIC Intelligent - Dimmable DALI Constant Current
Product family benefits:
Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W *
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application:
Linear lighting for office, education, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I
Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance
EAN: 4052899551763
Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Current set: DALI / LEDset / Programmable
Total harmonic distortion: < 15 %
Power factor: > 0.95
ECG efficiency: up to 90 %
Device power loss: 4.0 W
Power loss in stand-by mode: <0.15 W
Protective conductor current: <0.5 mA
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 24
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 15-54 V
U-OUT (working voltage): < 60 V
Nominal output current: 200-700 mA
Output current LEDset open: 100 mA
Output current LEDset shorted: 700 mA
Default output current: 100 mA
Output current tolerance: +/- 3 %
Output ripple current (100 Hz): < 1 %
Output PSTLM: <= 1
Output SVM: <= 0.4
Nominal output power: 4-37 W
Galvanic isolation: SELV
Dimensions & weight
Mounting hole spacing, length: 350.0 mm
Product weight: 240.00 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.0-9.0 mm
Wire preparation length, output side: 8.0-9.0 mm
Height: 21.0 mm
Width: 30.0 mm
Length: 360.0 mm
Colors & materials
Casing material: Metal
Temperatures & operating conditions
Ambient temperature range: -25 +50 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
Lifespan
ECG lifetime: 50000 / 100000 h
Capabilities
Programming interface: DALI, LEDset
Dimmable: Yes
Dimming interface: DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method
Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Non-reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Number of channels: 1
Control interface: DALI
Programming
ProgrammingTuner4TRONIC Field App: Yes
Programming device: DALI magic
Constant Lumen: Yes
Certificates & standards
Approval marks – approval: CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / RCM / BIS
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection: IP20
Commodity code: 850440829000
| Type of LED Driver | Constant Current |
|---|---|
| Type of Control/Dimming | Dali |
| Weight | 260g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify