Led Driver Ot 20/220-240/24 24v 20w 4050300618111
Osram
Part No
LEDOT2024
OT 20/220-240/24V PSU 24V Small 20W LED driver
Untroubled - a reliable power source for lighting
Product family benefits:
Installation in cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible
Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations
EAN: 4050300618111
Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Input voltage DC: -
Total harmonic distortion: < 15 %
Power factor (50-100% load): 0.5 - 0.6
ECG efficiency: 83 %
Device power loss: 4.0 W
Inrush current: 17 A
Max. ECG no. on circuit breaker 10 A (B): 23
Max. ECG no. on circuit breaker 10 A (C): -
Max. ECG no. on circuit breaker 16 A (C): -
Max. ECG no. on circuit breaker 16 A (B): 42
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V
U-OUT (working voltage): 24 V
Nominal output power: 20 W
Partial load: 0.5-20 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Surge capability (L/N-Ground): -
Output ripple Voltage (100 Hz): -
Dimensions & weight:
Mounting hole spacing, length: -
Product weight: 108.00 g
Cable cross-section, input side: 0.75-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 10 mm
Wire preparation length, output side: 10 mm
Cable/wire length, input side: -
Cable/wire length, output side: -
Length: 109.0 mm
Height: 35.0 mm
Width: 50.0 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20 +50 °C
Maximum temperature at tc test point: 70 °C
Max.housing temperature in case of fault: 90 °C
Temperature range at storage: -40 +85 °C
Permitted rel. humidity during operation: 5-85 %
Lifespan:
ECG lifetime: 30000 h
Capabilities:
Dimmable: No
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: II
Type of connection, output side: Screw terminal
Number of channels: 1
Certificates & standards:
Approval marks – approval: CE / ENEC 10 / VDE / VDE-EMC / RCM
Standards: Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class: II
Type of protection: IP20
Logistical data:
Commodity code: 85044083900
Untroubled - a reliable power source for lighting
Product family benefits:
Installation in cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible
Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations
EAN: 4050300618111
Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Input voltage DC: -
Total harmonic distortion: < 15 %
Power factor (50-100% load): 0.5 - 0.6
ECG efficiency: 83 %
Device power loss: 4.0 W
Inrush current: 17 A
Max. ECG no. on circuit breaker 10 A (B): 23
Max. ECG no. on circuit breaker 10 A (C): -
Max. ECG no. on circuit breaker 16 A (C): -
Max. ECG no. on circuit breaker 16 A (B): 42
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V
U-OUT (working voltage): 24 V
Nominal output power: 20 W
Partial load: 0.5-20 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Surge capability (L/N-Ground): -
Output ripple Voltage (100 Hz): -
Dimensions & weight:
Mounting hole spacing, length: -
Product weight: 108.00 g
Cable cross-section, input side: 0.75-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 10 mm
Wire preparation length, output side: 10 mm
Cable/wire length, input side: -
Cable/wire length, output side: -
Length: 109.0 mm
Height: 35.0 mm
Width: 50.0 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20 +50 °C
Maximum temperature at tc test point: 70 °C
Max.housing temperature in case of fault: 90 °C
Temperature range at storage: -40 +85 °C
Permitted rel. humidity during operation: 5-85 %
Lifespan:
ECG lifetime: 30000 h
Capabilities:
Dimmable: No
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: II
Type of connection, output side: Screw terminal
Number of channels: 1
Certificates & standards:
Approval marks – approval: CE / ENEC 10 / VDE / VDE-EMC / RCM
Standards: Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class: II
Type of protection: IP20
Logistical data:
Commodity code: 85044083900
Weight | 108g |
---|
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify