Led Oti Dali 80/220-240/24 1-4 Channel Dimmable Driver 4062172274302

Osram

Part No
LEDOTIDALI80G3CH4
£78.94 £65.78
In stock
OTi DALI 80/220-240/ 24 4CH DT6/8 G3

EAN: 4062172274302

Product family benefits:
Intelligent power matching thanks to Smart power supply
Slim form factor for mounting on the cove or in linear luminaires
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Available as single-channel or multi-channel with DT6 and DT8 in one device
DALI message detection "LED Module failure"
IP rating: IP20

Areas of application:
Cove lighting, wall washer, corridor, handrail, luminous ceilings
Suitable for use in luminaires of protection class I and II

Equipment / Accessories:
Suitable for 24 V LED modules

Electrical data:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 5 %
Power factor λ: > 0.98
Efficiency in full-load: 93%
Device power loss: 6.0 W
Inrush current: 46 A
Max. ECG no. on circuit breaker 10 A (B): 9
Max. ECG no. on circuit breaker 10 A (C): 15
Max. ECG no. on circuit breaker 16 A (C): 25
Max. ECG no. on circuit breaker 16 A (B): 15
Max. ECG no. on circuit breaker 25 A (B): 23
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V
U-OUT (working voltage): 24.2 V
Nominal output power: 80 W
Maximum output power: 80 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3.75 kV
Input voltage DC: 176…276 V
Output PWM frequency: > 2000 Hz
Output ripple Voltage (100 Hz): < 1 %

Dimensions & weight:
Mounting hole spacing, length: 300.6 mm
Product weight: 191.00 g
Cable cross-section, input side: 0.5…2.5 mm²
Cable cross-section, output side: 0.2…1.5 mm²
Wire preparation length, input side: 6.0 mm
Wire preparation length, output side: 5.0 mm
Length: 346.0 mm
Height: 22.0 mm
Width: 32.0 mm

Colors & materials:
Casing material: Plastic
Temperatures & operating conditions
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 75 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -40…+85 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 50000 h

Additional product data
Predecessor EAN: 4062172177924

Capabilities:
Dimmable: Yes
Dimming interface: DALI-2 / Corridor / Touch DIM
Dimming range: 0.1…100 %
Dimming method: Pulse Width Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Screw terminal
Type of connection, output side: Screw terminal
Number of channels: 1
Control interface: DALI-2

Programming:
Tuner4TRONIC: Yes

Certificates & standards:
Approval marks – approval: BIS / CCC / EAC / EL / ENEC 10 / RCM / VDE / VDE-EMC
Standards: Acc. to EN 55015/Acc. to EN 60598-2-22/Acc. to EN 61000-3-2/Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 62384/Acc. to EN 62386
Protection class: II
Type of protection: IP20

Logistical data:
Commodity code: 850440839000

Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 21-09-2022
Primary Article Identifier: 4062172274302
Declaration No. in SCIP database: In work
Technical Information
Weight 191g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Oti Dali 80/220-240/24 1-4 Channel Dimmable Driver 4062172274302
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify