Led Ot Dim 1-10V Dimming 50 - 120w 10/24v 4050300943459

Osram

Part No
LEDOTDIM
A$67.98
In stock

The control units complete the LED system from OSRAM. 

In addition to the LED modules and the OPTOTRONIC converters, an OT DIM dimmer unit and colour control units are available.
The controllers are used on the secondary side of the power supplies. This means they are connected between the OPTOTRONIC power supply and the LED modules. The controllers are suitable for both 10 V and 24 V LED modules and can therefore be used universally.

Product benefits: 
Safety requirement due to overload
Overtemperature 
Short-circuit protection


Product features:


Intelligent analog dimmer (1-10 V) with constant output voltage
2 Pairs of output terminals, single channel device
Dimming range: 0.1 - 100 %
Cable clamp housing for independent mounting

Areas of application:
Suitable for indoor SELV installations

- EAN: 4050300943459
- Output power (at 24 V): max. 120 W
- Output power (at 10V): max. 50 W
- Input voltage: 10.5 - 24 V
- Output voltage: 10.5 - 24 V
- ECG efficiency: 96 %
- Nominal voltage: 10 - 24 V
- Device power losses: max. 4 W
- Galvanic isolation primary/secondary: 3.75 kV
- Lenght: 172 mm
- Width: 42 mm
- Height: 20 mm
- Cable cross-section, input side: 0.5 - 1. sqmm
- Cable cross-section, output side: 0.5 - 1.5 sqmm
- Casing material: Plastic
- Ambient temperature range: -20 +50 C
- Max. temperature at tc test point: +70 C
- Max. housing temperature in case of fault: +100 C
- ECG Lifetime: 50000 h
- Dimmable: yes (up to 2 channels PWM output)
- Dimming range: 0 - 100 %
- Suitable for fixtures with prot. class: II
- Overheating protection: Automatic reversible
- Overload protection: Automatic reversible
- No-load proof: yes
- Type of protection: IP20

Technical Information
Weight 83g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Ot Dim 1-10V Dimming 50 - 120w 10/24v 4050300943459
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify