Led Driver Ot Dali2 15/220-240/1A0 Lt2 4062172143912

Osram Led Driver Ot Dali2 15/220-240/1A0 Lt2 4062172143912

Optional orange cable clamp F-style LEDOTCLAMPF, for independent mounting of the driver, to be ordered separately

Product family benefits:
Versatile DALI window driver due to flexible output characteristic
Very high efficiency
Protection of the system thanks to thermal management and Smart Control
High-quality dimming of 1…100 % by amplitude dimming

Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Areas of application:
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for use in luminaires with flexible current setting (DALI, CLO, LEDset)
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II
Suitable for downlights, spotlights and LED panels
Installation via Cable Clamp Kit possible (depending on version of product)

Electrical data:
Nominal input voltage: 220…240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198…264 V
Input voltage DC: 176…276 V
Total harmonic distortion: < 10 %
Power factor λ: 0.95
Efficiency in full-load: 88 %
Device power loss: 2.4 W
Networked standby power: ≤0.30 W
Inrush current: 5 A
Max. ECG no. on circuit breaker 10 A (B): 82
Max. ECG no. on circuit breaker 16 A (B): 130
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 7.5…54 V
U-OUT (working voltage) : 60 V
Nominal output current: 150…1050 mA
Output current LEDset open: 75 mA
Output current LEDset shorted: 350 mA
Default output current: 350 mA
Output current tolerance: ±3 %
Output ripple current (100 Hz): < 2 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Nominal output power: 18 W
Maximum output power: 18 W
Galvanic isolation DALI/output: SELV
Galvanic isolation DALI/mains: Basic
Galvanic isolation primary/secondary: SELV

Dimensions & weight:
Product weight: 100.00 g
Cable cross-section, input side: 0.2…1.5 mm²
Cable cross-section, output side: 0.2…1.5 mm²
Wire preparation length, input side: 8.0…9.0 mm
Wire preparation length, output side: 8.0…9.0 mm
Length: 95.0 mm
Width: 53.0 mm
Height: 30.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…+50 °C
Maximum temperature at tc test point: 75 °C
Max.housing temperature in case of fault: 100 °C
Temperature range at storage: -25…85 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 50000 / 100000 h

Additional product data:

Successor EAN: 4062172143912
Predecessor EAN: 4052899324879

Capabilities:
Dimmable: Yes
Dimming interface: DALI / Touch DIM / Touch DIM Sensor
Dimming range: 1…100 %
Dimming method: Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I / II
Suitable for emergency lighting: Yes
Type of connection, output side: Push terminal
Programming interface: DALI, LEDset
DALI-2 Energy Data: Yes
Number of channels: 1
DALI-2 Diagnostic Data: Yes

Programming:
Tuner4TRONIC Field App: No
Programming device: DALI / LEDset

Programmable features:
Lamp Operating Time: Yes
Driver Guard: No
DALI Settings: Yes
Emergency Mode: Yes
DALI-2 Luminaire Data: Yes
Configuration Lock: No
Soft Switch Off: Yes
Dim to Dark: No
TouchDIM + Sensor: Yes
Corridor Functionality: Yes
OEM Key: Yes

Certificates & standards:
Approval marks – approval: ENEC 10 / VDE / EMC / EL / CE
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384
Protection class: II
Type of protection: IP20

Logistical data:
Commodity code: 850440829000

Environmental information:
Date of Declaration: 10-11-2021
Primary Article Identifier: 4052899324879 | 4062172143912
Candidate List Substance 1: Lead
CAS No. of substance 1: 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 08ca3009-16b1-4104-8382-194565783c1f | e9ec3393-37eb-446a-b083-3425ba8b180d