Led dimmer Oti Dali Dim 1-4ch 240w 4062172166010

OTi DALI DIM 1-4CH D
Suitable to use with single colours and TW options

Product benefits:
Specifically designed flex LED tapes and signage modules
Class II design for a wide range of application
High power handling on 4 channels
1 to 4 channel output with DALI-2 certification
DT6 and DT8 operations through DIP switch selection

Product features:
12-48 V SELV output constant voltage range
Output power up to 240 W
Total power handling allowed on CH1
Overload/Over temperature/Short circuit protection, automatic, reversible
50.000h at tc max = 60 C
Screw terminals and integrated cable clamps
Suitable for Class I & II luminaires (EMI immunity for class I).
Wide ta range -25 +50 C
DT6 or DT8 selection through DIP switch
Touch DIM compatibility
5 years guarantee

Areas of application:
Suitable for indoor installations
Separate installation (ceiling mounting)
Hospitality – decorative lighting, night light, dynamic lighting
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, cabinet lighting

Technical data:
EAN: 4062172166010
Nominal input voltage: 12-48 V
Mains frequency: 0 Hz
Nominal output voltage: 12-48 V
Nominal output power: 240 W
Min. load/channel: 20W
Max output current/dimmer (DT6 & DT8): 10A*
Capacitive load: 1 microF/A
Power loss in no-load condition: <= 0.5
Standby power: <= 0.5
Secondary switching: NOT allowed
Galvanic isolation: SELV
Output PWM frequency: 3k Hz
Mounting hole spacing, length: 175.5 mm
Product weight: 86.00 g
Cable cross-section, input side: 0.5 - 2.5 sqmm
Cable cross-section, output side: 0.5-2.5 sqmm
Wire preparation length, input side: 5-8 mm
Wire preparation length, output side: 5-8 mm
Height: 20.0 mm
Length (Total); 181.0 mm
Length (Holes interaxis); 175.5 mm
Width: 42.0 mm
Weight: 100 g
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point; 60 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: No
Dimmable: Yes
Dimming interface: DALI-2
DALI interface polarity: No
Dimming range (logarithmic curve): 0.1 - 100 %
Dimming method: PWM
PWM frequency: 3 kHz
Safe Dimming Technology: Yes
Overheating protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Protection class: II
Suitable for fixtures with prot. class: I / II
EMI immunity: for class I
Type of connection, input side: Screw terminal
Type of connection, output side: Screw terminal
Number of channels: 4
Corridor Function: Yes
Approval marks – approval: CE / EAC / RCM / ENEC 05
Standards: Acc. to EC 61347-2-13/Acc. to EN 62384/Acc. to EN 55015/Acc. to EN 61547
Type of protection: IP20
Casing material: Plastic (White RAL9010)
Commodity code: 853710989900

*Please check output power chart in technical datasheet file for max. output wattage/current for each channel in DT6 and DT8 modes