Led Driver OT FIT 14/220-240/350 CS PC Phasecut dimmable 4062172286503

OT FIT 14/220-240/350 CS PC

Constant Current SELV drivers with leading- or trailing-edge dimming.

The compatibility with the most common leading-edge and trailing-edge phase dimmers and the possibility of dimming from 5-100% marks one of the key characteristics. Others include a cable clamp for independent installations and DIP switsches for 4 output currents per wattage.

Orange cable clamps included with the driver. This allows independent mounting of the driver.
EAN: 4062172286503

Perfect match for the Osram PrevaLED Coins 1400 (50mm):  LEDCOB140092715D, LEDCOB140092724D, LEDCOB140092740D, LEDCOB140093015D, LEDCOB140093024D & LEDCOB140093040D

Product family features:
Cable clamp housing for independent mounting
Dimmable on the leading edge and trailing edge
Housing for independent installation

Product family benefits:
Compatible with the most common leading-edge and trailing-edge phase dimmers
Flexible current setting (DIPswitch – 2 to 4 currents)
Flicker-free dimming
Higher quality of light thanks to < 5% output ripple current
Housing from 80% recycled plastic

Areas of application:
Decorative illumination
Downlights, flat luminaires
Hospitality
Living areas
Museums, residential buildings
Offices
Shop lighting
Suitable for indoor SELV installations
Suitable for luminaires of protection class I and II

Electrical Data:
Nominal voltage: 220 - 240 V
Mains frequency: 50 - 60 Hz
Input voltage AC: 198 - 264 V
Total harmonic distortion: < 20 %
Power factor λ (full/minimum load at 230 V): 0.9C/ 0.95
ECG efficiency (full load at 230 V): 81 %
Device power losses (max): 3.5 W
Inrush current: < 10 A
Nominal output power: 14 W
Partial load: 5.4 - 14 W
Nominal output voltage: 27 - 40 V
Nominal output current: 200 / 250 / 300 / 350 mA (+/- 7.5%)
Max. ECG no. on circuit breaker 10 A (C): 132
Max. ECG no. on circuit breaker 10 A (B): 80
Max. ECG no. on circuit breaker 16 A (C): 212
Max. ECG no. on circuit breaker 16 A (B): 128
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 27-40 V
U-OUT (working voltage): 60 V
Output current tolerance: ±7.5 %
Output ripple current (100 Hz): < 5 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Default output current: 350 mA
Galvanic isolation primary/secondary: SELV
Current set: DipSwitch

Dimensions & weight:
Product weight: 60 g
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.75 - 1.5 sqmm
Wire preparation length, input side: 8-9 mm
Wire preparation length, output side: 8-9 mm
Length: 130 mm
Width: 30 mm
Height: 22.2 mm

Colors & materials:
Casing material: 80% recycled plastic

Temperatures & operating conditions:
Ambient temperature range: -20 +50 C
Temperature range at storage: -40 +85 C
Maximum temperature at tc test point: max. +70 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %

Lifespan:

Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut (Leading edge/Trailing edge)
Dimming range: 5 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2 m
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Suitable for through-wiring:No
Number of channels: 1

Programming:
Programming device: DIPswitch

Certificates & standards:
Approval marks – approval: CCC / CE / UKCA / ENEC
Standards:
Acc. to IEC 61347-1/Acc. to IEC 61347-2-3/Acc. to IEC 62384/Acc. to IEC
61547/Acc. to IEC 61000-3-3/Acc. to EN 61000-3-2
Protection class: I,II
Type of protection: IP20

Logistical data:
Commodity code: 85044083900