Led Driver Ot Fit 8/220-240/180 Cs Pc Phase Cut 180mA 4062172007535

LED driver for modules that require 100 / 120 / 155 / 180 mA input
current. 

EAN: 4062172007535

Suitable for switching or phase cut dimming.

Recommended for the Osram PrevaLED Coins CN35 (such as LEDCOB60093036D, LEDCOB60092736D).

Orange cable clamp (for independent installation of the driver) is
included.

EAN: 4062172007535

Product family benefits:

Compatible with the most common leading-edge and trailing-edge phase
dimmers

Flexible current setting (DIPswitch – 2 to 4 currents)

Flicker-free dimming

Higher quality of light thanks to < 5% output ripple current

Areas of application:

Decorative illumination

Downlights, flat luminaires

Hospitality

Living areas

Museums, residential buildings

Offices

Shop lighting

Suitable for indoor SELV installations

Suitable for luminaires of protection class I and II

Electrical data:

Nominal input voltage: 220…240 V

Mains frequency: 50/60 Hz

Input voltage AC: 198…264 V

Total harmonic distortion: < 20 %

Power factor λ: > 0.95

Efficiency in full-load: 80 %

Device power loss: 1.8 W

Protective conductor current: <0.7 mA

Inrush current: < 10 A

Max. ECG no. on circuit breaker 10 A (C): 132

Max. ECG no. on circuit breaker 10 A (B): 80

Max. ECG no. on circuit breaker 16 A (C): 212

Max. ECG no. on circuit breaker 16 A (B): 128

Max. ECG no. on circuit breaker 25 A (B): -

Surge capability (L/N-Ground): 2 kV

Surge capability (L-N): 1 kV

Nominal output voltage: 27…40 V

U-OUT (working voltage): 60 V

Nominal output current: 100 / 120 / 155 / 180 mA

Output current tolerance: ±7.5 %

Output ripple current (100 Hz): < 5 %

Output PSTLM: ≤1

Output SVM: ≤0.4

Nominal output power: 7.2 W

Maximum output power: 7.2 W

Galvanic isolation: SELV

Galvanic isolation primary/secondary: 3.75 kV

Dimensions & weight:

Product weight: 59.20 g

Cable cross-section, input side: 0.75…1.5 mm²

Cable cross-section, output side: 0.75…1.5 mm²

Wire preparation length, input side: 5…6 mm

Wire preparation length, output side: 5…6 mm

Length: 95.0 mm

Width: 50.0 mm

Height: 22.0 mm

Colors & materials:

Casing material: Plastic

Temperatures & operating conditions:

Ambient temperature range: -20…+50 °C

Maximum temperature at tc test point: 70 °C

Max.housing temperature in case of fault: 110 °C

Temperature range at storage: -20…80 °C

Permitted rel. humidity during operation: 5…85 %

Lifespan:

ECG lifetime: 30000 / 50000 h

Capabilities:

Dimmable: Yes

Dimming interface: Phase Cut

Dimming range: 5…100 %

Dimming method: Amplitude Modulation

Overheating protection: Automatic reversible

Overload protection: Automatic reversible

Short-circuit protection: Automatic reversible

No-load proof: Yes

Intended for no-load operation: No

Max. cable length to lamp/LED module: 2.0 m

Suitable for fixtures with prot. class: I / II

Type of connection, input side: Push terminal

Type of connection, output side: Push terminal

Suitable for through-wiring: No

Number of channels: 1

Programming:

Programming device: DIPswitch

Certificates & standards:

Approval marks – approval: CE / CCC / ENEC / EAC / RCM

Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to
CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547

Protection class: II

Type of protection: IP20

Logistical data:

Commodity code: 850440829000

Environmental information:

Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)

Date of Declaration: 31-01-2022

Primary Article Identifier: 4062172007535

Candidate List Substance 1: Lead

CAS No. of substance 1: 7439-92-1

Safe Use Instruction: The identification of the Candidate List substance is
sufficient to allow safe use of the article.

Declaration No. in SCIP database: 6e88ee0f-0c1e-40e4-bfd7-c3d9050d2382