Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Ot Fit 30/220-240/700 Cs Pc 4052899617308

Osram

Part No
LEDOTFIT30700CSPC
OT FIT 30/220-240/700 CS PC

Constant Current SELV drivers with leading- or trailing-edge dimming.

The compatibility with the most common leading-edge and trailing-edge phase dimmers and the possibility of dimming from 5-100% marks one of the key characteristics.

Optional orange cable clamp E-style LEDOTCLAMPE, for independent mounting, to be ordered separately

Product family benefits:
Compatible with the most common leading-edge and trailing-edge phase dimmers
Flexible current setting (DIPswitch – 2 to 4 currents)
Flicker-free dimming
Higher quality of light thanks to < 5% output ripple current
Housing from 80% recycled plastic

Areas of application:
Decorative illumination
Downlights, flat luminaires
Hospitality
Living areas
Museums, residential buildings
Offices
Shop lighting
Suitable for indoor SELV installations
Suitable for luminaires of protection class I and II

Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 20 %
Power factor λ: 0.90C-0.97
Efficiency in full-load: 84 %
Device power loss: 5.0 W
Protective conductor current: <0.7 mA
Inrush current: < 10 A
Max. ECG no. on circuit breaker 10 A (B): 26
Max. ECG no. on circuit breaker 10 A (C): 26
Max. ECG no. on circuit breaker 16 A (C): 41
Max. ECG no. on circuit breaker 16 A (B): 41
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 27-40 V
U-OUT (working voltage): 60 V
Nominal output current: 500 / 700 mA
Output current tolerance: ±10 %
Output ripple current (100 Hz): < 5 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Nominal output power: 13.5-28 W
Maximum output power: 28 W
Galvanic isolation primary/secondary: SELV
Default output current: 700 mA
Current set: DipSwitch

Dimensions & weight:
Product weight: 109.00 g
Cable cross-section, input side: 0.5-1.5 mm²
Cable cross-section, output side: 0.5-1.5 mm²
Wire preparation length, input side: 7-8 mm
Wire preparation length, output side: 7-8 mm
Width: 53.0 mm
Height: 30.0 mm
Length: 95.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20 +50 °C
Maximum temperature at tc test point: 75 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -40 +85 °C
Permitted rel. humidity during operation: 5-85 %

Lifespan:
ECG lifetime: 35000 / 50000 h

Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut
Dimming range: 5-100 %
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Suitable for through-wiring: No
Detection angle (PIR): -
Detection angle (Light sensor): -
Number of channels: 1
Control interface: -

Certificates & standards:
Approval marks – approval: CE
Standards: Acc. to IEC 61347-1/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to IEC 61000-3-2/Acc. to IEC 6100-4-5/Acc. to IEC 61547
Protection class: I,II
Type of protection: IP20

Logistical data:
Commodity code: 85044083900

Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 23-08-2023
Primary Article Identifier: 4052899617308
Candidate List Substance 1: Lead
CAS No. of substance 1: 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 9bb8ced1-6cd2-4aca-bb2e-b4da1b28f39f

sgm_clp_1 div for segmentify