Led Oti Dali2 30/220-240/24 1 Channel Dim 4062172329767
Osram
Part No
LEDOTIDALI30CH1
OTi DALI 30/220-240/24 1CH
Versatile - easy control for dynamic light
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting to be ordered separately
Product family features:
CV Power supplies with DALI
Dimmable via Touch DIM
LED drivers whose output power can be shared arbitrarily
among the 2 or 4 channels (where multiple channels)
Dimming range: 0.1 or 1…100 %
Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits:
Intelligent power matching thanks to Smart power supply
Slim form factor for mounting on the cove or in linear luminaires
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Available as single-channel or multi-channel with DT6 and DT8 in one device
DALI message detection "LED Module failure"
Areas of application:
Cove lighting, wall washer, corridor, handrail, luminous ceilings
Suitable for use in luminaires of protection class I and II
Technical data:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 10 %
Power factor: λ 0.32…0.95
Efficiency in full-load: > 88 % (at 230V, 50 Hz)
Device power loss: 4.5 W
Networked standby power: <0.50 W (at 230V, 50 Hz)
Inrush current: 40 A
Max. ECG no. on circuit breaker 10 A (B): 20
Max. ECG no. on circuit breaker 10 A (C): 32
Max. ECG no. on circuit breaker 16 A (B): 31
Max. ECG no. on circuit breaker 16 A (C): 52
Max. ECG no. on circuit breaker 25 A (B): 81
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V (DC voltage)
U-OUT (working voltage): 24.2 V
Nominal output power: 30 W
Maximum output power: 30 W (at steady state)
Galvanic isolation: SELV
Input voltage: DC 176…276 V
Output PWM frequency: > 3000 Hz
Output ripple Voltage (100 Hz): < 1 %
Dimensions & weight:
Mounting hole spacing, length: 94.0 mm
Product weight: 155.00 g
Cable cross-section, input side: 0.5…1.5 mm²
Cable cross-section, output side: 0.5…1.5 mm²
Wire preparation length, input side: 7.0 mm
Wire preparation length, output side: 7.0 mm
Mounting hole spacing, width: 58.0 mm
Length: 103.0 mm
Width: 67.0 mm
Height: 29.5 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault : 110 °C
Temperature range at storage: -40…+85 °C
Permitted rel. humidity during operation: 5…85 % (Maximum 56 days/year at 85%)
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: DALI
Dimming range: 0…100 %
Dimming method: Pulse Width Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Plug-in connection
Type of connection, output side: Plug-in connection
Control interface: DALI-2
Number of channels: 1
Programming:
Tuner4TRONIC: Yes
Certificates & standards:
Approval marks – approval: CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM / UKCA
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015
Protection class: II
Type of protection: IP20
Logistical data:
Commodity code: 850440839000
Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 28-03-2023
Primary Article Identifier: 4062172329767
Candidate List Substance 1: Lead
CAS No. of substance: 1 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 00655979-2845-4498-83fd-fa3355affbc4
Versatile - easy control for dynamic light
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting to be ordered separately
Product family features:
CV Power supplies with DALI
Dimmable via Touch DIM
LED drivers whose output power can be shared arbitrarily
among the 2 or 4 channels (where multiple channels)
Dimming range: 0.1 or 1…100 %
Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits:
Intelligent power matching thanks to Smart power supply
Slim form factor for mounting on the cove or in linear luminaires
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Available as single-channel or multi-channel with DT6 and DT8 in one device
DALI message detection "LED Module failure"
Areas of application:
Cove lighting, wall washer, corridor, handrail, luminous ceilings
Suitable for use in luminaires of protection class I and II
Technical data:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 10 %
Power factor: λ 0.32…0.95
Efficiency in full-load: > 88 % (at 230V, 50 Hz)
Device power loss: 4.5 W
Networked standby power: <0.50 W (at 230V, 50 Hz)
Inrush current: 40 A
Max. ECG no. on circuit breaker 10 A (B): 20
Max. ECG no. on circuit breaker 10 A (C): 32
Max. ECG no. on circuit breaker 16 A (B): 31
Max. ECG no. on circuit breaker 16 A (C): 52
Max. ECG no. on circuit breaker 25 A (B): 81
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V (DC voltage)
U-OUT (working voltage): 24.2 V
Nominal output power: 30 W
Maximum output power: 30 W (at steady state)
Galvanic isolation: SELV
Input voltage: DC 176…276 V
Output PWM frequency: > 3000 Hz
Output ripple Voltage (100 Hz): < 1 %
Dimensions & weight:
Mounting hole spacing, length: 94.0 mm
Product weight: 155.00 g
Cable cross-section, input side: 0.5…1.5 mm²
Cable cross-section, output side: 0.5…1.5 mm²
Wire preparation length, input side: 7.0 mm
Wire preparation length, output side: 7.0 mm
Mounting hole spacing, width: 58.0 mm
Length: 103.0 mm
Width: 67.0 mm
Height: 29.5 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault : 110 °C
Temperature range at storage: -40…+85 °C
Permitted rel. humidity during operation: 5…85 % (Maximum 56 days/year at 85%)
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: DALI
Dimming range: 0…100 %
Dimming method: Pulse Width Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Plug-in connection
Type of connection, output side: Plug-in connection
Control interface: DALI-2
Number of channels: 1
Programming:
Tuner4TRONIC: Yes
Certificates & standards:
Approval marks – approval: CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM / UKCA
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015
Protection class: II
Type of protection: IP20
Logistical data:
Commodity code: 850440839000
Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 28-03-2023
Primary Article Identifier: 4062172329767
Candidate List Substance 1: Lead
CAS No. of substance: 1 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 00655979-2845-4498-83fd-fa3355affbc4
Weight | 150g |
---|
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify