DALI-2 Relay Module for the integration of non-dimmable loads in DALI lighting systems 86456944
Lunatone
Part No
LEDDALI2RM8
DALI-2 Relay Module for the integration of non-dimmable loads in DALI lighting systems
The DALI-2 RM8 provides a relay contact that can be controlled via the DALI bus. In this way, loads without a DALI input can be easily integrated into a DALI circuit. Permanent loads up to 2kW can be switched via DALI commands. The purposeful switching in voltage zero crossings, enables an increase of the device lifetime. Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software.
The product range of RM8 and RM16 also includes versions with integrated in-rush current limitation, various housing designs and variations with make contact or changeover contact.
Product features:
Designed and made in the EU
Max nominal load of 1000VA
Compact housing for back box installation
Product family overview:
Compact relay module for the direct control of 230V AC loads via DALI
Ballasts without DALI-input can be simply integrated in a DALI lighting control system. The loads can then be switched ON and OFF by DALI commands
The DALI RM8/16 module fulfills the requirements for DALI Device Type 7 - switching function (firmware 2.0 and higher)
Configurable Power-Up and System-Failure behaviour
Free DALI-Cockpit software package for configuration of DALI-systems and Lunatone DALI components
The RM 8/16 is supplied directly by the DALI signal line
Zero cross switching
The DALI RM 8/16 module acts like any conventional DALI ballast, and can be addressed and configured accordingly.
Article number: 86456944 (Back box version)
Electrical data:
Supply: via DALI-line
Typ. current consumption: 2.7mA
Relay output switch on/off voltage: 250Vac
Max. nominal load circuit breaker: 1000VA (6A max)
Max. breaking current: 12A
Max. inrush current: 60A
Max. continuous current: 8A
Switching method: Zero cross switching
Type of relay contact: 1 normally open
Switching operations at nominal load, resistive: >10x5
Maximum switching frequency: 1Hz
Input: DALI
Number of used DALI addresses: 1
Technical data:
Behaviour at Power Up: programmable: ON/OFF/no Change
Behaviour at System failure: programmable: ON/OFF/no Change
Storage and transportation temperature: -20°C +75°C
Operating ambient temperature: -20°C +60°C
Protection class: II in intended use
Protection degree housing: IP40
Protection degree terminals: IP20
Connecting wire cross section: 1.5 sqmm
Dimensions: 59mm x 33mm x 15mm
The DALI-2 RM8 provides a relay contact that can be controlled via the DALI bus. In this way, loads without a DALI input can be easily integrated into a DALI circuit. Permanent loads up to 2kW can be switched via DALI commands. The purposeful switching in voltage zero crossings, enables an increase of the device lifetime. Power-up mode and system-failure settings can be configured using the DALI Cockpit PC Software.
The product range of RM8 and RM16 also includes versions with integrated in-rush current limitation, various housing designs and variations with make contact or changeover contact.
Product features:
Designed and made in the EU
Max nominal load of 1000VA
Compact housing for back box installation
Product family overview:
Compact relay module for the direct control of 230V AC loads via DALI
Ballasts without DALI-input can be simply integrated in a DALI lighting control system. The loads can then be switched ON and OFF by DALI commands
The DALI RM8/16 module fulfills the requirements for DALI Device Type 7 - switching function (firmware 2.0 and higher)
Configurable Power-Up and System-Failure behaviour
Free DALI-Cockpit software package for configuration of DALI-systems and Lunatone DALI components
The RM 8/16 is supplied directly by the DALI signal line
Zero cross switching
The DALI RM 8/16 module acts like any conventional DALI ballast, and can be addressed and configured accordingly.
Article number: 86456944 (Back box version)
Electrical data:
Supply: via DALI-line
Typ. current consumption: 2.7mA
Relay output switch on/off voltage: 250Vac
Max. nominal load circuit breaker: 1000VA (6A max)
Max. breaking current: 12A
Max. inrush current: 60A
Max. continuous current: 8A
Switching method: Zero cross switching
Type of relay contact: 1 normally open
Switching operations at nominal load, resistive: >10x5
Maximum switching frequency: 1Hz
Input: DALI
Number of used DALI addresses: 1
Technical data:
Behaviour at Power Up: programmable: ON/OFF/no Change
Behaviour at System failure: programmable: ON/OFF/no Change
Storage and transportation temperature: -20°C +75°C
Operating ambient temperature: -20°C +60°C
Protection class: II in intended use
Protection degree housing: IP40
Protection degree terminals: IP20
Connecting wire cross section: 1.5 sqmm
Dimensions: 59mm x 33mm x 15mm
| Weight | 20g |
|---|
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify