Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable 4062172237642
Osram
Part No
LEDOTFIT15024PC
£51.46
£42.88
In stock
Osram Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable for 24V LED strips
EAN: 4062172237642
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting, to be ordered separately.
Product family benefits:
IP rating: IP20
High efficiency
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible
Areas of application:
Suitable for luminaires of protection classes I and II
Hospitality – decorative lighting, night light
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, under cabinet lighting
Technical spec:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 15 %
Power factor λ: > 0.95
Efficiency in full-load: 92 %
Device power loss: 13 W
Inrush current: < 60 A
Max. ECG no. on circuit breaker 10 A (C): 3
Max. ECG no. on circuit breaker 10 A (B): 2
Max. ECG no. on circuit breaker 16 A (B): 4
Max. ECG no. on circuit breaker 16 A (C): 6
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V
Nominal output power: 60.5...151.3 W
Maximum output power: 151.3 W
Galvanic isolation: SELV
Output PWM frequency: 3k Hz
Dimensions & weight:
Mounting hole spacing, length: 159.5 mm
Product weight: 580.00 g
Cable cross-section, input side: 0.75…1.5 mm²
Cable cross-section, output side: 0.75…1.5 mm²
Wire preparation length, input side: 7…8 mm
Wire preparation length, output side: 7…8 mm
Mounting hole spacing, width: 66 mm
Length: 170.0 mm
Height: 30.0 mm
Width: 76.0 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -20…80 °C
Permitted rel. humidity during operation: 5…85 %
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut
Dimming range: 3…100 %
Dimming method: PWM
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection:
Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, input side: Fixed connection (terminal)
Type of connection, output side: Fixed connection (terminal)
Number of channels: 1
Control interface: Trailing edge dimmer recommended
Programming:
Tuner4TRONIC: No
Certificates & standards:
Approval marks – approval: CE / ENEC / CCC / RCM / UKCA / EAC / SELV / CB
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 60598-1/Acc. to EN 62384/CISPR 15/EN 55015
Protection class: II
Type of protection: IP20
EAN: 4062172237642
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting, to be ordered separately.
Product family benefits:
IP rating: IP20
High efficiency
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible
Areas of application:
Suitable for luminaires of protection classes I and II
Hospitality – decorative lighting, night light
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, under cabinet lighting
Technical spec:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 15 %
Power factor λ: > 0.95
Efficiency in full-load: 92 %
Device power loss: 13 W
Inrush current: < 60 A
Max. ECG no. on circuit breaker 10 A (C): 3
Max. ECG no. on circuit breaker 10 A (B): 2
Max. ECG no. on circuit breaker 16 A (B): 4
Max. ECG no. on circuit breaker 16 A (C): 6
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V
Nominal output power: 60.5...151.3 W
Maximum output power: 151.3 W
Galvanic isolation: SELV
Output PWM frequency: 3k Hz
Dimensions & weight:
Mounting hole spacing, length: 159.5 mm
Product weight: 580.00 g
Cable cross-section, input side: 0.75…1.5 mm²
Cable cross-section, output side: 0.75…1.5 mm²
Wire preparation length, input side: 7…8 mm
Wire preparation length, output side: 7…8 mm
Mounting hole spacing, width: 66 mm
Length: 170.0 mm
Height: 30.0 mm
Width: 76.0 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -20…80 °C
Permitted rel. humidity during operation: 5…85 %
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut
Dimming range: 3…100 %
Dimming method: PWM
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection:
Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, input side: Fixed connection (terminal)
Type of connection, output side: Fixed connection (terminal)
Number of channels: 1
Control interface: Trailing edge dimmer recommended
Programming:
Tuner4TRONIC: No
Certificates & standards:
Approval marks – approval: CE / ENEC / CCC / RCM / UKCA / EAC / SELV / CB
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 60598-1/Acc. to EN 62384/CISPR 15/EN 55015
Protection class: II
Type of protection: IP20
Type of LED Driver | Constant Voltage |
---|---|
Type of Control/Dimming | Mains (Phase-cut) |
Weight | 580g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify