Quiet exhaust fan unit designed to be fitted into sealed wooden cabinets, closets and enclosed equipment racks where hot air is not being expelled. These type of situations invariably cause thermal failure, as the in-board fans are just recycling hot air.
These exhaust fans are easily fitted into any wooden enclosures all that is required is an awl, cross-head screwdriver and a 79mm Hole Cutter.
Once mounted just hook-up to the 12V universal PSU via the input socket. A second unit can also be run from the 500mA power supply by using a CRC-LINK cable. A thermal sensor accessory, the CRC-TEMP can be Plugged into the TEMP socket. Technical Specifications: - Dimensions: 100mm x 100mm x 25mm -Low Noise 22.5dBA (0.3 Sone) -28CFM (47.6m³/h) @2000 RPM -High Static Pressure -1 x 9 Bladed 80mm Fan -12V DC - 200mA -2 x DC In/Out Sockets -Temperature Sensor Socket -DC in/out sockets -500mA universal PSU supplied -Mounting Holes align with attached fitting template -Fluid Bearings = 2 Year Limited Warrantee
Does FT80-Q unit extract hot air from inside a cupboard or does it draw in cool air from outside a rack cupboard? Can it also be mounted on to the ceiling?
The product has been designed to extract air, It may possibly be able to be mounted into a ceiling but we have not designed it to work like this
Could be possible to change the air flow direction?
Thank you for the question. Unfortunately the air flow direction on the FT80-Q cannot be reversed.