1U Rack Panels Punched for 12 x D-Series Connectors

Part No
R1269/1UK/12
€14.80 €12.33
In stock
1U Rack Panels Punched for 12 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.)

Keep your electronics organised and structured.

Technical Information
3D Model View 3D Drawing
Number of Connectors 12
Material 1.2mm Steel
Size (U) 1U
Weight 227g
Connectors D-Series
Finish Black
Customer Questions
Can 1/4", powercon, ethercon, MIDI and USB jacks be installed on this R1269/1UK/12 panel as well, or is it only compatible with XLR and speakon jacks? thanks!
The R1269/1UK/12 is designed to be used with the Neutrik D-series range of chassis connectors. If you use the Neutrik ethercon, midi and USB then this is suitable.
Are the screw holes for mounting inserts tapped or will it require nuts on the back side to hold in the inserts?
Thank you for your enquiry. The mounting insert holes are not tapped. You will require nuts on the back or you can use our product COMFD - https://www.pennelcomonline.com/en/Penn-Elcom-M3-Mounting-Frame-for-unified-chassis-MFD/m-5179.aspx Kind Regards...
do you all have a 1U rack panel punched out for 2 x SpeakON connectors...Thanks, Lupe
Thank you for your enquiry, We do not have this in our range, you could produce this through our "panel design" software, please find link below - https://www.penn-elcom.com//penn-elcom-panel-designer Regards Penn Elcom
What are the correct screws for this panel? I'm installing Canare SDI jacks and Neutrik XLR jacks.
Thank yo ufor your enquiry, We sell the fixings for the d-series connectors, We would suggest using the COMFD rear mounting frames and the HSM3C12BP-100 Kind Regards PennElcomOnline
Did you find what you were looking for?
Write Your Own Review
You're reviewing:1U Rack Panels Punched for 12 x D-Series Connectors
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify