Led Oti Dali2 30/220-240/24 1 Channel Dim 4062172329767

OTi DALI 30/220-240/24 1CH

Versatile - easy control for dynamic light
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting to be ordered separately 

Product family features:
CV Power supplies with DALI 
Dimmable via Touch DIM 
LED drivers whose output power can be shared arbitrarily
among the 2 or 4 channels (where multiple channels) 
Dimming range: 0.1 or 1…100 % 
Line frequency: 0 Hz | 50 Hz | 60 Hz 

Product family benefits: 
Intelligent power matching thanks to Smart power supply 
Slim form factor for mounting on the cove or in linear luminaires 
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz) 
Suitable for installation in emergency lighting systems according to EN 60598-2-22 
Available as single-channel or multi-channel with DT6 and DT8 in one device 
DALI message detection "LED Module failure" 

Areas of application: 
Cove lighting, wall washer, corridor, handrail, luminous ceilings 
Suitable for use in luminaires of protection class I and II

Technical data: 
Nominal input voltage: 220…240 V 
Mains frequency: 50/60 HZ Hz 
Input voltage AC: 198…264 V 
Total harmonic distortion: < 10 % 
Power factor: λ 0.32…0.95 
Efficiency in full-load: > 88 % (at 230V, 50 Hz) 
Device power loss: 4.5 W 
Networked standby power: <0.50 W (at 230V, 50 Hz) 
Inrush current: 40 A 
Max. ECG no. on circuit breaker 10 A (B): 20 
Max. ECG no. on circuit breaker 10 A (C): 32 
Max. ECG no. on circuit breaker 16 A (B): 31 
Max. ECG no. on circuit breaker 16 A (C): 52 
Max. ECG no. on circuit breaker 25 A (B): 81 
Surge capability (L/N-Ground): 2 kV 
Surge capability (L-N): 1 kV 
Nominal output voltage: 24.2 V (DC voltage) 
U-OUT (working voltage): 24.2 V 
Nominal output power: 30 W 
Maximum output power: 30 W (at steady state) 
Galvanic isolation: SELV 
Input voltage: DC 176…276 V 
Output PWM frequency: > 3000 Hz 
Output ripple Voltage (100 Hz): < 1 % 

Dimensions & weight:
Mounting hole spacing, length: 94.0 mm 
Product weight: 155.00 g 
Cable cross-section, input side: 0.5…1.5 mm² 
Cable cross-section, output side: 0.5…1.5 mm² 
Wire preparation length, input side: 7.0 mm 
Wire preparation length, output side: 7.0 mm 
Mounting hole spacing, width: 58.0 mm 
Length: 103.0 mm 
Width: 67.0 mm 
Height: 29.5 mm 

Colors & materials: 
Casing material: Plastic 

Temperatures & operating conditions: 
Ambient temperature range: -20…+45 °C 
Maximum temperature at tc test point: 80 °C 
Max.housing temperature in case of fault : 110 °C 
Temperature range at storage: -40…+85 °C 
Permitted rel. humidity during operation: 5…85 % (Maximum 56 days/year at 85%)

Lifespan:
ECG lifetime: 50000 h

Capabilities:
Dimmable: Yes
Dimming interface: DALI
Dimming range: 0…100 % 
Dimming method: Pulse Width Modulation 
Overheating protection: Automatic reversible 
Overload protection: Automatic reversible 
Short-circuit protection: Automatic reversible 
No-load proof: Yes 
Intended for no-load operation: No 
Suitable for fixtures with prot. class: I / II 
Type of connection, input side: Plug-in connection 
Type of connection, output side: Plug-in connection 
Control interface: DALI-2 
Number of channels: 1

Programming: 
Tuner4TRONIC: Yes 

Certificates & standards: 
Approval marks – approval: CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM / UKCA 
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015 
Protection class: II 
Type of protection: IP20 

Logistical data: 
Commodity code: 850440839000 

Environmental information: 
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh) 
Date of Declaration: 28-03-2023 
Primary Article Identifier: 4062172329767 
Candidate List Substance 1: Lead 
CAS No. of substance: 1 7439-92-1 
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article. 
Declaration No. in SCIP database: 00655979-2845-4498-83fd-fa3355affbc4