Led Oti Dali 15/220-240/1A0 NFC 4062172061766

OTi DALI 15/220-240/1A0 NFC

Peace of mind – Freedom in design & usage – Ready for IoT.

This Compact LED Driver is fully digitally programmable by DALI and NFC and ready for the new DiiA standards: 251, 252 and 253. The very wide operating window and an optional cable clamp for independent installation and through-looping allow some flexibility in its usage.

Optional orange cable clamp F-style LEDOTCLAMPF, for independent mounting of the driver, to be ordered separately!
EAN: 4062172061766

Perfect match for the Osram PrevaLED Coins 1400 (50mm): LEDCOB140093040D, LEDCOB140093024D, LEDCOB140092724D, LEDCOB140093015D, LEDCOB140092740D

Product family benefits:
Versatile DALI window driver due to flexible output characteristic
Locking and unlocking of luminaire/driver data
Advanced luminaire/driver data (power, energy, operating hours…) for analytics
DALI-2 certified incl. Parts 251, 252, 253
Easy and fast output current setting via NFC
Very high efficiency
High-quality dimming of 1…100 % by amplitude dimming

Versatile scope of application due to OSRAM DALI Technology:
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting

Areas of application:
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for use in luminaires with flexible current setting
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II
Suitable for downlights, spotlights and LED panels
Installation via Cable Clamp Kit possible (depending on version of product)

Electrical Data:
Nominal voltage: 220 - 240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198 - 264 V
Input voltage DC: 176 - 276 V
Total harmonic distortion (full load, 220-240V/50Hz): < 10 %
Power factor λ: 0.38 - 0.95
Efficiency in full-load (at 230V/50Hz): 88 %
Device power losses (max): 2.4 W
Inrush current: < 5 A
Nominal output power: 18 W
Partial load: 3 - 18 W
Nominal output voltage: 7.5 - 54 V
Nominal output current: 700 mA (+/- 10%)
Max. ECG no. on circuit breaker 10 A (C): 132
Max. ECG no. on circuit breaker 10 A (B): 80
Max. ECG no. on circuit breaker 16 A (C): 212
Max. ECG no. on circuit breaker 16 A (B): 128
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 27-40 V
U-OUT (working voltage): 60 V
Nominal output current: 150-1050 mA
Default output current: 350 mA
Output current tolerance: ±3 %
Output ripple current (100 Hz): < 2 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Current set: DALI / NFC
Networked standby power: ≤0.27 W
Galvanic isolation DALI/output: SELV
Galvanic isolation DALI/mains: Basic
Galvanic isolation primary/secondary: SELV
Power loss in stand-by mode: ≤0.27 W

Dimensions & weight:
Product weight: 100 g
Cable cross-section, input side: 0.2 - 1.5 sqmm
Cable cross-section, output side: 0.2 - 1.5 sqmm
Wire preparation length, input side: 8-9 mm
Wire preparation length, output side: 8-9 mm
Length: 95.0 mm
Width: 53.0 mm
Height: 30.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20 +50 C
Temperature range at storage: -40 +85 C
Maximum temperature at tc test point: max. +80 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %

Lifespan:
ECG lifetime: 50000 / 100000 h

Additional product data:
Predecessor EAN: 4052899548190

Capabilities:
Dimmable: Yes
Dimming interface: DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection; Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
DALI-2 Energy Data: Yes
Suitable for through-wiring: No
Suitable for emergency lighting: Yes
DALI-2 Diagnostic Data: Yes
Control interface: DALI-2
Number of channels: 1
Programming interface: DALI, NFC
Constant lumen function: Programmable

Programming:
Tuner4TRONIC Field App: Yes
Programming device: DALI / NFC
Tuner4TRONIC: Yes

Programmable features:
Driver Guard: Yes
Soft Switch Off: Yes
Dim to Dark: Yes
TouchDIM + Sensor: Yes
Emergency Mode: Yes
DALI-2 Luminaire Data: Yes
Configuration Lock: Yes
OEM Key: No
Constant Lumen: Yes
Operating Current: Yes
Lamp Operating Time: Yes
Corridor Functionality: Yes
DALI Settings: Yes

Certificates & standards:
Approval marks – approval: CE / EL / ENEC 10 / VDE-EMC / DALI-2
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class: II
Type of protection: IP20

Logistical data:
Commodity code: 85044083900