DALI to analogue 0-10V signal converter for integration of operating devices with 1-10V control input into DALI systems 86458508-AN

DALI to 0-10V Analog Interface, Galvanically Isolated
DT5 Converter Module for the integration of 0-10V dimmer in DALI lighting systems

This interface converts DALI signals to a galvanically isolated, analogue 0-10V signal, thus enables the integration of operating devices with 1-10V control input into a DALI system. DALI Device Type 5 (IEC62386-206) compatible: linear or logarithmic dimming curve.

Product features:
Module converting DALI dimming commands into analogue 0-10V signal (DALI DT5)
The module is especially designed to operate with drivers with 0-10V control input
Transformation of DALI 8-Bit arc power level into analogue output signal from 0V to 10V
Selection of linear or logarithmic dimming curve (DT5)
Factory default are the default DT5 settings: output range 1-10V, logarithmic dimming curve
Maximum output current of 1mA (current sink)
The DALI 0-10V converter must not be connected to the mains. It is supplied directly by the DALI signal line.
The DALI 0-10V converter has its own address and can be assigned to DALI groups and scenes
Electrically isolated
Auto Calibration Mode (can be deactivated or manually triggered via DALI-Cockpit)
Designed and made in the EU
Compact housing for back box installation
DALI-1 version

Article number: 86458508-AN

Electrical data:
Supply: via DALI signal line
typ. current consumption DALI: <4.1 mA
input: DALI
output: 0.6V-10V analog voltage, 100uA-1mA

Input:
Inputs for: Potential free button/switch
Number of inputs: 4
Marking input terminals: T1, T2, T3, T4, COM
minimum length of control pulse: 40ms
Control pulse length for long press configurable: 200-5100ms
Max wire length pushbutton input: 5m

General data:
Dimensions (l x w x h): 41mm x 28.0mm x 14 mm
Weight: ~10g
Protection degree housing: IP40
Protection degree terminals: IP20

Environmental conditions:
Storing and transportation temperature: -20°C +75°C
Operational ambient temperature: -20°C +75°C
Rel. humidity, not condensing: 15% - 90%

Terminals:
Connection type: spring terminal connectors
Wire size: solid core: 0,5 - 1,5 mm2 (AWG20 - AWG16)
Wire size: fine wired: 0,5 - 1,5 mm2 (AWG20 - AWG16)
Wire size using wire end ferrule: 0,25 - 1 mm2
Stripping length: 8,5 - 9,5 mm / 0,33 - 0,37 inch
Tightening/ release of wire: push button

Standards:
DALI: IEC 62386-102, IEC 62386-206 (DT5 extension)
Markings: DALI, CE, UK CA