Led Driver Ote 18/220-240/500 Phase Cut 4052899105362

Osram

Part No
LEDOTE18500PC

OTe 18/220-240/500 PC

Optional orange cable clamp E-style LEDOTCLAMPE, for independent mounting, to be ordered separately.

Product benefits:
Compact housing for mounting in very tight spaces
Compatible with the most common leading-edge and trailing-edge phase dimmers

Product features:
Dimmable via leading edge/trailing edge

Areas of application:
Suitable for indoor installations

EAN: 4052899105362
Nominal output power: 18 W
Partial load: 9 - 18 W
Input voltage AC: 198 - 264 V
Mains frequency: 50 - 60 Hz
Nominal output voltage: 18 - 36 V
Maximum output voltage: < 48 V
Nominal output current: 500 mA (+/- 10%)
Nominal voltage: 220 - 240 V
Device power losses (max): 3.5 W
Power factor ? (full/minimum load at 230 V): 0.95/ 0.9
ECG efficiency (full load at 230 V): 84 %
Inrush current: 5 A
Max. no. of ECGs on circuit breaker 10 A: 52
Max. no. of ECGs on circuit breaker 16 A: 84
Galvanic isolation primary/secondary (SELV equivalent): 3.75 kV
Surge capability (L/N-Ground): 1 kV
Surge capability (L-N): 1 kV
Length: 95 mm
Width: 53 mm
Height: 30 mm
Product weight: 110 g
Cable cross-section, input side: 0.75 - 1.5 sqmm (flexible/solid leads)
Cable cross-section, output side: 0.5 - 1.5 sqmm (flexible/solid leads)
Wire preparation length, input side: 8.0 - 9.0 mm
Casing material: Plastic
Ambient temperature range: -20 +55 C
Temperature range at storage: -25 +75 C
Maximum temperature at tc test point: max. 80 C
Max.housing temperature in case of fault: 110 C
ECG lifetime (at Tcase = 70 C at Tc point/10-% failure rate) : 50000 h
Dimmable: Yes
Dimming range: 10 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming interface: Phase Cut (Leading edge/Trailing edge)
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Type of protection: IP20
Standards: Acc. to IEC 61347/Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to CISPR 15/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Approval marks - approval: CE / ENEC 10 / VDE / CB


Technical Information
Weight 110g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver Ote 18/220-240/500 Phase Cut 4052899105362
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify