Htm 105 Electronic Transformer 35-105w Dim 4050300442334

Osram

Part No
TRHTM105
HALOTRONIC-COMPACT - HTM, HTN | Electronic transformers for low-voltage halogen lamps

Product benefits:

Dimmable on the leading edge (without HTN) and trailing edge
Very low power loss thanks to high efficacy
Strain relief suitable for different cable types (HTM)
Suitable for space-critical installation thanks to compact functional design
Extremely compact transformer for highly space-critical installation conditions (HTN)
Protective operation throughout the entire partial-load range for long lamp life

Product features:

Line frequency: 50/60 Hz
RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Safety: to EN 61347
Short-circuit protection, overload protection, overtemperature protection: electronically reversible
Electrical isolation between the primary side and the secondary side
Switching between electronic transformer and lamp not permitted
Energy efficiency: >= 91 % (according to ErP regulation 2012/1194/EC)

Areas of application:

Effect and accent lighting
Living rooms
Object lighting
Conference rooms
Restaurants
Recessed and surface-mounted furniture fixtures
Shop lighting
Event rooms

EAN: 4050300442334
Lamp wattage: 35-105 W
Line current: 0.41 A
Nominal voltage: 230-240 V
Power factor λ: 0.99
Output voltage: 11.3/11.4 V
Mains frequency: 50/60 Hz
System wattage: 111.00 W
Galvanic isolation primary/secondary: 4.00 kV
Maximum no-load wattage: 0.41 W
Length: 108.0 mm
Width: 52.0 mm
Height: 33.0 mm
Cable cross-section, input side: 2.5 sqmm
Cable cross-section, output side: 2.5 sqmm
Wire preparation length, input side (cable sheath/ wire): 12 / 7.0 mm
Wire preparation length, output side (cable sheath/ wire):  12 / 7.0 mm
Product weight: 125.00 g
Ambient temperature range: 0 +45 C
Maximum temperature at tc test point: +85 C
Design/version: Compact with cable clamp
Dimmer: Trailing- or leading-edge phase control for inductive load dimmers
Overload protection: Automatic reversible
Overheating protection: Automatic reversible
Short-circuit protection: Automatic reversible
Maximum wiring length ECG/lamp: 2.0 m
Cable types, input side: NYM 3x1.5 / H05VV-F 3x0.75 / H05VV-F 3x1.0 / H05VV-F 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.0 / H05VV-F 2x1.5 / H05VVH2-F 2x0.75 / H05VVH2-F 2x1.5 sqmm
Cable types, output side: NYM 3x1.5 / H05VV-F 3x0.75 / H05VV-F 3x1.5 / H05VV-F 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.5 / H05VVH2-F 2x0.75 sqmm
Dimmable: Yes
Dimming range: 0-100 %
No-load proof: Yes
Suitable for fixtures with prot. class: II
Approval marks - approval: VDE / VDE-EMC / E1 approval
Technical Information
Weight 125g
Customer Questions
Is this transformer suitable for a dual MR16 recessed fitting
Yes, this is suitable for low voltage halogen lamps. Load requirements are min. 35W and max. 105W”
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Htm 105 Electronic Transformer 35-105w Dim 4050300442334
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify