Led Driver Ot 40/220-240/24 Dim P 24v 40w 4052899545823

CV Power supplies 24 V with 1-10 V

Product benefits:
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %

Product features:
DC mode functionality
Type of protection IP66 and IP67
Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range -30 +55 C
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface

Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations

EAN: 4052899545823
Nominal voltage: 220-240 V
Mains frequency: 0-60 Hz
Input voltage AC: 198-264 V
Total harmonic distortion: < 15 %
Power factor: 0.95
ECG efficiency: 85 %
Device power loss: 6 W
Power loss in stand-by mode: <0.5 W
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 35
Max. ECG no. on circuit breaker 16 A (B): 57
Max. ECG no. on circuit breaker 25 A (B): 87
Surge capability (L-N): 4 kV
Nominal output voltage: 24.2 V
U-OUT (working voltage): 30 V
Nominal output power: 40 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Length: 208 mm
Width: 43 mm
Height: 26 mm
Mounting hole spacing, length: 199 mm
Product weight: 416 g
Cable cross-section, input side: 1.0 sqmm
Cable cross-section, output side: 1.0 sqmm
Wire preparation length, input side: 90 mm
Wire preparation length, output side: 90 mm
Cable/wire length, control input: 320 mm
Cable/wire length, input side: 300 mm
Cable/wire length, output side: 300 mm
Casing material: Plastic
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
Ambient temperature range: -30 +55 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 h
Encapsulated: Yes
Dimmable: Yes
Dimming interface: 1-10 V
Dimming range: 1-100 %
Dimming method: Pulse Width Modulation
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
No-load proof: Yes
Suitable for fixtures with prot. class: II
Type of connection, output side: Cables
Number of channels: 1
Approval marks: ENEC/RCM/CCC/EAC
Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Protection class: II
Type of protection: IP66
Temperature range at storage: -40 +85 C