This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
  • World IconEnglish
  • powerCON

    (1 To 6 Of 6)

    powerCON 20 Amp

    Image of powerCON 20 Amp
    The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guar...

    powerCON 20 Amp

    Image of powerCON 20 Amp
    Image of powerCON 20 Amp Image of powerCON 20 Amp
    The powerCON is a locking 3 conductor equipment AC connector with contacts for line, neutral and pre-mating ground contact. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.
    Attention: The powerCON is a connector without breaking capacity, i.e. the powerCON should not be connected or disconnected under load or live!

    Features & Benefits

    -Locking 20 A / 250 V ac appliance coupler
    -3 contacts for line, neutral and premating safety ground
    -Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
    -Fast and easy twist lock latching system
    -Extremely robust and reliable
    -Ergonomic design
    -User friendly latch design for easy handling
    -Unique Neutrik chuck type strain relief
    -UL, cUL recognized components
    -VDE certified
    -SEV approved
    -Branded with unique hologram - guarantees genuine and authentic Neutrik product
    Part No.TerminationPower TypeConnectorPole
    CONAC3MPA1Flat tab terminalsA-type for power-inChassis connector3
    CONAC3MPB1Flat tab terminalsB-type for power-outChassis connector3
    CONAC3FCAScrew terminalsA-type for power-inCable connector3
    CONAC3FCBScrew terminalsB-type for power-outCable connector3

    powerCON 32 Amp

    Image of powerCON 32 Amp
    The 32 Amp powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the ne...

    powerCON 32 Amp

    Image of powerCON 32 Amp
    The 32 Amp powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 pole connection system without breaking capacity to serve the needs of high power distribution systems and supplies for professional audio and lighting equipment and installations. The connectors comprise of contacts for phase, neutral and protective earth (ground) conductors rated for currents up to 32 A and for voltages up to 250V.

    Features & Benefits
    -250 V ac, 32 Amp single-phase (for ambient temperatures up to 35°C)
    -Premating contact for protective earth
    -Fast and easy locking system to prevent unintentional disengagement
    -Cable O.D. Range: 8 - 20 mm
    -Wiring with screw-type terminals for wires 2.5 to 6.0 mm² (AWG 14 - 10)
    -Excellent cable handling and protection
    -Extremely robust and reliable
    -VDE, UL, cUL and JET approved
    Part No.ConnectorTerminationPole
    CONAC3FCHCCable connectorScrew terminals3
    CONAC3MPHCChassis connector - Power-inScrew terminals3

    powerCON 32 Amp (5 Pole 2P + 3 PE)

    Image of powerCON 32 Amp (5 Pole 2P + 3 PE)
    Single phase powerCON® with 3 protective earth conductors
    32 Amp / NAC3-2 Series - AC Installation Coupler
    (5 Pole 2P + 3 PE)

    The AC installation coupler was conceived to serve the needs of distribution systems for professio...

    powerCON 32 Amp (5 Pole 2P + 3 PE)

    Image of powerCON 32 Amp (5 Pole 2P + 3 PE)
    Single phase powerCON® with 3 protective earth conductors
    32 Amp / NAC3-2 Series - AC Installation Coupler
    (5 Pole 2P + 3 PE)

    The AC installation coupler was conceived to serve the needs of distribution systems for professional IT equipment and desk power supplies for the office environment. The system is designed according to the British Standard BS 7671
    section 607 only and is therefore limited to corresponding applications. Operation is only guaranteed for related applications and has the ASTA marks licence number: 845.
    Note: The PowerCon® is a connector without breaking capacity, i.e. the PowerCon® should not be connected or disconnected under load or live!
    Part No.PoleConnectorTermination
    CONAC32FC5Cable connectorScrew terminals
    CONAC32MP5Chassis connector - Power-inScrew terminals

    NAC3MPXXA-WOT NEW!

    Image of NAC3MPXXA-WOT
    PowerCON Mains Input 3 Pin 20A Chassis

    This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.

    Appliance inlet connector, 3/16" flat tab terminal...

    NAC3MPXXA-WOT NEW!

    Image of NAC3MPXXA-WOT
    PowerCON Mains Input 3 Pin 20A Chassis

    This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1.

    Appliance inlet connector, 3/16" flat tab terminals, blue, without insulation divider.

    The powerCON XX is a locking mains connector. It replaces appliance couplers wherever a very reliable solution in combination with a locking device is needed in order to guarantee a safe power connection.

    The powerCON XX is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

    Features & Benefits
    - Lockable single phase connector
    - Certified according to IEC 60320-1 & UL 60320-1
    - 3 contacts for line, neutral and premating safety ground
    - Certified according to UL-1977 & CAN/CSA-C22.2 No. 182.3
    - Fast and easy twist lock latching system Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating
    - Extremely robust and reliable
    - IEC 62368-1 compliant
    - UL94 V-0 materials

    Part No.FinishDescriptionConnectorTerminationPoleWeight
    CONAC3MPXXAWOTBlueChassis connector - Power-inFlat Tab TerminalsFlat Tab Terminals340g/0.088lb

    powerCON TRUE1 Chassis TOP Series

    Image of powerCON TRUE1 Chassis TOP Series
    The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. ...

    powerCON TRUE1 Chassis TOP Series

    Image of powerCON TRUE1 Chassis TOP Series
    Image of powerCON TRUE1 Chassis TOP Series Image of powerCON TRUE1 Chassis TOP Series
    The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

    The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

    Features & Benefits
    - Heavy duty sealed power connector for harsh and demanding environment
    - Outdoor protection according to IP65 and UL50E enclosure type 4 (in mated condition or in combination with the rubber sealing cover SCNAC-MPX)
    - Uses high impact UV-resistant materials
    - True mains connector with breaking capacity (CBC)
    - Lockable 16 A single phase connector (USA: 20 A)
    - Easy and reliable twist lock system
    - Extremely robust and reliable Unique Neutrik cable retention
    - ENEC certified according to IEC 60320
    - UL498 certified
    Part No.FinishTypeTerminals
    CONAC3MPXTOPBlackInlet1/4" flat tab terminals
    CONAC3FPXTOPBlackOutlet1/4" flat tab terminals
    CONAC3PXTOPBlackInlet-Outlet Combination1/4" flat tab terminals
    CONAC3FPXSTTOPBlackOutletScrew terminals

    powerCON TRUE1 Connectors TOP Series

    Image of powerCON TRUE1 Connectors TOP Series
    The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection. ...

    powerCON TRUE1 Connectors TOP Series

    Image of powerCON TRUE1 Connectors TOP Series
    The powerCON TRUE1 TOP is a locking 16 A true mains connector for outdoor applications. It replaces appliance couplers wherever a very rugged solution in combination with a locking device is needed in order to guarantee a safe power connection.

    The powerCON TRUE1 TOP is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live.

    Features & Benefits
    - Heavy duty sealed power connector for harsh and demanding environment
    - Outdoor protection according to IP65 and UL50E enclosure type 4 (in mated condition)
    - Uses high impact UV-resistant materials
    - True mains connector with breaking capacity (CBC)
    - Lockable 16 A single phase connector (USA: 20 A)
    - Easy and reliable twist lock system
    - Extremely robust and reliable Unique Neutrik cable retention
    - ENEC certified according to IEC 60320
    - UL498 certified
    Part No.Description
    CONAC3FXWTOPLocking male connector with screw terminals
    CONAC3MXWTOPLocking Female connector with screw terminals
    Penn Elcom Logo