Rack Cooling Systems & Fans

This is a quiet 1U Hot Air Extraction Unit, which uses 3 miniature blowers to expel heat from any 19” equipment racks.

Behind the 1U Escutcheon, the ergonomic 0.5U space design allows for the CoolRaC to be placed in between layers of equipment to pull heat directly away from the gear.

Technical Specifications
• Noise Level: 22 - 38dBA
• Power: 12V DC - 420mA
• Air movement: 120 CFM
• 1A Universal PSU included.
•Black Powder Coated
• 1mm Steel Construction

Available accessories:
This CoolRaC can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor.
Or it can be Digitally Controlled with our FT-DTC 1U Rack Mounting Thermostatic Controller.
DC link cable: CRC-Link

Quiet and versatile Rack Fan Unit. Easy switch from a 1U fan tray to a 6U blower.
Can either draw in or expel air from the front or the back of the rack.

Technical Specifications
• Low Noise (24.4 dBA)
• Power: 12V DC Operation - 450mA
• Air movement: 170 CFM
• 1A Universal PSU included
• Temperature Sensor Switch Socket
• DC in/out sockets
• Black Powder Coated
• 1mm Steel Construction

Available accessories:
This Fan Unit can be controlled by our CRC-TEMP Standard Fixed 40º thermal sensor.
Or it can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller.
DC link cable: CRC-Link

Quiet Dual Fan Kit for Rack Enclosures

Quiet dual fan kits designed to be fitted in any pre-punched 120mm x 120mm / 4.72" x 4.72" fan vents.
Compatible with R6400, R6600 and R6425 / R6525 Wall Mount Rack Enclosures as well as R4006, R5006, R4008 and R5008 Stand Alone Racks Cabinets.
A 1A universal PSU is supplied with the fan kit.

Technical Specifications
- Air movement: 150CFM (252m/h) @1,350RPM
- Fan Dimensions: (OD) 120 x 120 x 25mm (4" x 4" x 1")
- Fan units: 2 x 9 Bladed 120mm / 4.72" Fans
- Noise levels: 22.5dBA (0.3 Sone).
- Power: 12V DC - 500mA
- Power out: 2 x DC In/Out Sockets

This Fan Unit can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor.
Or it can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller.
DC link cable: CRC-Link

Low noise 3U Heat Extraction Units are designed to be fitted into the front or back of a 19-inch rack to suck hot air out of an enclosure. As hot air rises the best results will be achieved by mounting them at the top of the cabinet.

A DC-DC link socket is provided, so two or more units can be linked together; a higher power PSU must be used.

Each extractor can also be controlled by a CRC-TEMP thermal sensor.

Technical Specifications
• Low Noise 22.5dBA (0.3 Sone)
• Air movement: 200CFM (336m³/h) @1,350RPM
• Dimensions: 483mm x 133.4mm x 55mm / 19.02" x 5.25" x 2.17"
• 2 x 9 Bladed 120mm Fans
• High Static Pressure
• Power: 12V DC – 500mA / 2 x DC In/Out Sockets
• 500mA universal PSU supplied
• Fluid Bearings = 2 Year Limited Warrantee

These extractor panels can be controlled by our CRC-TEMP Standard Fixed 40°C (104°F) thermal sensor.
Or they can be Digitally Controlled by our FT-DTC 1U Rack Mounting Thermostatic Controller.
Use AF-F12 Magnetic Fan Dust Filter Covers.

2U Rack Mountable Digital Thermostatically Controlled Quiet Fan Exhaust unit, for use in 19” equipment racks.

It has been designed be fitted in-between equipment or at the top of the rack to expel hot air efficiently and quietly.

Technical Specifications
• Continuous temperature monitoring
• Set & forget fan control
• Fan run LED indicator
• Over temperature alarm
• Temperature Sensor Input Socket
• Plug-in PTC sensor 1m lead
• Low Noise (24.4 dBA)
• 12V DC Operation - 500mA
• 3 x 9 Bladed Swiss 120mm Fans
• 220 CFM / 378m³/h
• Japan made Fluid Bearings
• Temperature Sensor Input Socket
• DC in/out sockets
• 1A universal PSU supplied
• Dimensions (OD): 44.5mm x 483mm x 222mm / 1.75" x 19.02" x 8.74"

Digitally controlled version of our long standing popular FT01Q fan tray.

1U Rack Mountable Digital Thermostatically Controlled Quiet Fan Tray unit, for use in 19” equipment racks.

It is designed be fitted at the top of the rack to move hot air up through the rack as required.

Technical Specifications
• Continuous temperature monitoring
• Over temperature alarm
• Plug-in PTC sensor 1m / 39" lead
• Low Noise (22.5 dBA)
• 12V DC Operation - 500mA
• 3 x 9 Bladed Swiss 120mm Fans
• 220 CFM / 378m³/h
• Japan made Fluid Bearings
• Temperature Sensor Input Socket
• DC in/out sockets
• 1A universal PSU supplied
• Dimensions: 44.5mm x 483mm x 222mm / 1.75" x 19.02" x 8.74"

These fan trays have been made for the R4000 / R5000 server rack enclosures. They are designed to be fitted in the 10U Top Service Area to extract the hot air and draw up cool air from the bottom inlets.

Technical Specifications
- Low Noise 22.5dBA (0.3 Sone)
- Up to 444CFM 756m³/h @1,350RPM
- High Static Pressure
- 9 Bladed 120mm Fans
- 12V DC - 750 - 2000mA
- 2 x DC In/Out Sockets
- Temperature Probe Socket (Standard Fixed 40°C (104°F) Sensor
- On/Off with a coloured indicator Rocker Switch
- Suitable World Wide Universal PSU supplied
- Fluid Bearings = 2 Year Limited Warrantee

These Fan Trays can also be Digitally Controlled by our FT-DTC 1U Rack Mountable Thermostatic Controller

This 1U Rack Mountable Digital Thermostatic Controller can be used to monitor and control all of our low noise DC fan units: CoolRaC, FT01-Q, FT02-Q and FP02-Q-3U. (Warning: only compatible with Penn Elcom cooling systems)

The digital thermostat module features: Continuous rack temperature monitoring, settable fan run temperature control with LED indicator and over temperature alarm.

Technical Specifications
• CRC-LINK DC link cable included
• Continuous temperature monitoring
• Set & forget fan control
• Fan run LED indicator
• Over temperature alarm
• 12V DC Input & Output 2.1 Sockets
• Switched 12V DC at Maximum of 4A
• Temperature Sensor Input Socket
• Plug-in PTC sensor 1m / 39" lead
• Dimensions (OD): 44.5mm x 483mm x 70mm / 1.75" x 19.02" x 2.76"

Innovative Design Enables Quiet and Efficient Ventilation
The innovative design of the fan blades improves the airflow and facilitates a highly efficient ventilation. The impeller was designed with a focus on minimizing the noise level yet delivering the desired airflow and pressure. This is the quietest fan on the market!

Long Service Life
The Fluid Dynamic Bearing comes with an oil capsule that avoids lubricant leakage. Thus this bearing is as quiet as a sleeve bearing but comes with a significantly higher service life.

Two Way installation
Mount to extract hot air or reverse mount to draw in cool air

Comes with 4 screws and 3-pin socket connector
Noise Level: 0.3 Sone (@ 1,350 RPM)

Performance
Fan Speed:
- 1,350 RPM (@ 12V DC)
- 900 RPM (@ 7V DC)
- 650 RPM (@ 5V DC)
Air Flow: 53CFM (90.1 m3/h)

Electrical Characteristics
Typical Voltage: 12V DC
Start-up Voltage: 2.7V DC
Cable Length: 400mm / 15.75"

Connection
Motherboard: +12V DC
3-pin socket

Cooling Fan 210/240v 50/60Hz 14.5/12.5W 2200/2400 RPM Impedance Protected

110v Low Noise Cooling Fan - Sold in the USA Only
Aluminum Casing - Polycarbonate Impeller - Ball Bearings

Fan Cord sold separately

114.3mm / 4.5" Diameter Fan Guard for P1800 and 8700 Fans

Quiet exhaust fan unit designed to be fitted into sealed wooden cabinets, closets and enclosed equipment racks where hot air is not being expelled. These type of situations invariably cause thermal failure, as the in-board fans are just recycling hot air.

These exhaust fans are easily fitted into any wooden enclosures all that is required is a an awl, cross head screwdriver and a 79mm / 3 1/8" Hole Cutter.

Once mounted just hook-up to the 12V universal PSU via the input socket.
A second unit can also be run from the 500mA power supply by using a CRC-LINK cable.

A thermal sensor accessory, the CRC-TEMP can be Plugged into the TEMP socket.

Technical Specifications:
· Dimensions: 100mm x 100mm x 25mm / 4" x 4" x 1"
· Low Noise 22.5dBA (0.3 Sone)
· 28CFM (47.6m³/h) @2000 RPM
· High Static Pressure
· 1 x 9 Bladed 80mm / 3.15" Fan
· 12V DC - 200mA
· 2 x DC In/Out Sockets
· Temperature Sensor Socket
· DC in/out sockets
· 500mA universal PSU supplied
· Mounting Holes align with attached fitting template

· Fluid Bearings = 2 Year Limited Warrantee

Penn Elcom brings you a new and quiet exhaust fan unit for flight case racking that is mounted into a Penn Elcom large dish for your convenience.

The FT80-Q-FC regulates the enclosure’s temperature by expelling hot air, preventing thermal failure. Thermal failure is caused by many generic in-board fans that simply circulate hot air within the enclosure rather than expelling it.

- Low noise level 22.5dBA (0.3 sone)
- Dimensions: 178mm x 127mm x 47.5mm / 7" x 5" x 1.87"
- 28CFM (47.6m³/h) at 2000 RPM
- High static pressure
- 1 x 9 bladed 80mm / 3.15" fan
- 12V DC - 200mA
- 2 x DC in/out sockets
- Temperature sensor socket
- 500mA universal PSU supplied
- Combined weight of 400g / 0.88Lb
- Fluid bearings = 2 year limited warrantee


A second unit can also be run from the 500mA power supply by using a CRC-LINK cable.

Thermal sensor accessory included, the CRC-TEMP can be Plugged into the TEMP socket.

Magnetic Fan Dust Filter Cover. (Sold in Pairs). Held in place with 4 Neodymium Magnets and can easily be removed for cleaning.

Designed to fit over 120mm / 4.72" grilles on the FP02-Q-3U fan panel but also usable with most of our other fan trays.


Technical Specifications:
- N42 Neodymium Magnet - 0.44kg/0.97lb Pull each
- 6mm / 1/4" Thick Reticulated Filter Foam 45 PPI
- Dimensions: 132mm x 132mm x 17mm / 5.2" x 5.2" x 11/16"

Accessories for rack cooling systems:

• CRC-TEMP: Plug-in thermostat enables the fan to activate only when it reaches a certain temperature. This increases the efficiency of the unit and reduces noise to zero when it is not active.

• CRC-LINK2.1mm / 3/32" to 2.1mm / 3/32" DC link cable for use with the 2000mA PSU or connect FT-DTC Digital Thermostatic Controller to other units