Open Tower Racks

Upgraded Design

Designed to give instant 360° access to tightly-stored enclosures, the R8010 lets you effortlessly slide a fully-loaded rack out to 550mm / 21.65" and rotate it in any direction.

The rack is built with high grade steel, structurally fortified so there's minimal flex under a heavy or full load. A rotation locking mechanism lets you extend the rack and then fix it to 0° or in ±60° increments to ensure the rack remains in place while being worked on. The two built-in catch locks ensure the rack can't extend or spin unless engaged.

The rear cable management tray is hinged so it folds when the rack slides in and out. As the cables are fed along the tray and up through the central opening, they're free to slide and spin with the rack without creating cable tension. With this method, cables are protected from damage and disarray.

The tower base and top portion also include cable management as well as fixing points for R8010-SCT side cable trays. The base unit holds the slide catch, the rotation catch (with removable security plate) and also includes cable tie holes at the rear as well.

Installation is easy too, just screw the base plate to any flat, solid surface.

Available with M6 or 10/32 threaded rack rails

Load Capacity: 60kg/132.28lb

Assembly: 30 minutes

Includes: top unit, rotating base unit, folding cable management bar, rack rails

Modular rack tower system with a footprint of only 500mm x 500mm / 19.69" x 19.69" which makes it ideal for installations in tight and restricted spaces.

Also available in 460mm / 18.11", 600mm / 23.62" and 800mm / 31.5" deep versions, which include a 1U space for blank, vented, or cable access rack panels in the base.

Flat Pack / knock-down comes with:
- 2 top and base units (pre-punched for castors)
- 4 rails (choose from 12u to 28u)
- All the required fasteners
- Add castors kit: 50mm / 1.97" swivel castors (2 with brakes and 2 without brakes)
- Add side panels: (only available for R2020-16U); 500mm / 19.69" deep, 16U high

600mm / 23.62" Wide Open Rack Tower, with M6 Threaded Rail.

Available Depths: 540mm / 21.26", 740mm / 29.13" and 940mm / 37.01"
Available Heights: From 18U to 47U

Features
- Simple assembly
- Adjustable Threaded Rack Rails
- Integral cable trays
- Optional Side Doors
- Earth Points and Gangable

Custom Sizes & Colours available.

600mm / 23.62" Wide Open Rack Tower, with 10-32 Threaded Rail.

Available Depths: 540mm / 21.26", 740mm / 29.13" and 940mm / 37.01"
Available Heights: From 18U to 47U

Features
- Simple assembly
- Adjustable Threaded Rack Rails
- Integral cable trays
- Optional Side Doors
- Earth Points and Gangable

Custom Sizes & Colours available.

Open Tower Rack System for maximum air flow and open access to rack mount equipment. Ships in Flat Pack / knock-down, ready to assemble.

Kit includes: 
- 4 x Rack rails
- 2 x Single side support cross braces
- 2 x Double side support cross braces
- Top unit with 8U rack space for cooling units or cable management
- Base unit
- 4 x W0950 castor with integrated adjuster foot
- Assembly screw kit

Available Accessories:
- Adjustable foot option: R8295
- Heavy duty castors options:  W0980 and  W0980/B or  W0990/80 and  W0985/80 or  W0990-V6 and  W0985-V6 castors.

- For additional rack shelf support, use R8840/14 for the 400mm / 15.75" deep version and  R8840/16 for the 510mm / 20" deep version.

Suitable fasteners for racking equipment :
- Screws: High Point Screws or S1045 - S1165 Machine Screws
- Cage Nuts: S1170
- Washers S1940 or washers with anti-rotation peg S1941


Any height available upon request

Components and accessories for R8200 racking system.

-Base Unit with fixings for M12 adjuster feet, or W0980/ W0985/ W0990 castors.
-Top Unit with 8U Rack Space.
-Single and double cross braces for cable management or mounting additional rack strips.
-Suitable fasteners for racking equipment are S1170, S1045K and S1941 or S1940.

Slim Open Tower Rack System for maximum air flow and open access to rack mount equipment.
- Only 488mm / 19.21" Wide
- Ships Flat Pack / knock-down, ready to assemble.

Kit includes: 
- 4 x 10/32 Threaded Rack rails
- Cable management support cross braces
- Top unit with rack space for cooling units or cable management
- Base unit
- 4 x W0950 castor with integrated adjuster foot
- Assembly screw kit

Available Accessories:
- Adjustable foot option: R8295
- Heavy duty castors option:  R8296

Suitable fasteners for racking equipment :
- Screws: S1032/HP/WA/100
- Washers S1940 or washers with anti-rotation peg S1941


Any height available upon request

Simple flat pack / knock-down open tower rack system.
Works with R0863 or R0883 rack strip (minimum 4U) for any size or depth rack.

Optional adjustable feet F3000 and castor kits R8480 or R2020-CASTOR-KIT are available.

Rack Pack System. Aluminium Frame System with Plastic Corners.

550mm x 550mm / 21.65" x 21.65", see below for height.

Flat Pack / knock-down