This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
  • World IconEnglish
  • Home: Crating Hardware

    Crating Hardware

    (1 To 30 Of 43)
    Previous [1] 2 Next

    6035 - 6225 - Series 6 Pallet Cushions

    Image of 6035 - 6225
    Series 6 Air-Dampened Pallet Cushions.

    Cushion Height: 2-11/16" / 68mm
    Cushion + Spacer = 3-3/4” / 95mm

    Use Spacer ...

    6035 - 6225 - Series 6 Pallet Cushions

    Image of 6035 - 6225
    Image of 6035 - 6225 Image of 6035 - 6225 Image of 6035 - 6225
    Series 6 Air-Dampened Pallet Cushions.

    Cushion Height: 2-11/16" / 68mm
    Cushion + Spacer = 3-3/4” / 95mm

    Use Spacer 6228

    Our Pallet Cushions are the most economical and reliable way to replace and upgrade wooden skid runners on pallet crates, eliminating the need for costly air-ride trucks, these air-dampened polyethylene cushions are easily attached to pallets or crates to provide a high level of protection from shock and vibration.
    Don’t risk shipment damage by shocks, drops, and impact during transit or handling.

    Easy to Install
    The pre-installed t-nut, with a 5/16”-18 UNC thread, protrudes out of the cushions for easy location into the mounting hole and fast installation. (Also available with an M8 threaded t-nut)
    The pallet cushions are mounted directly on a pallet or container base with a simple bolt.

    Reusable
    The pallet cushions can be easily removed and mounted again on another pallet.
    Simple and Practical
    Our Series 6 Pallet Cushions, once fitted with the 6228 Spacer, create a four-way 3-3/4” space under the pallet, which makes it easy to load and unload with a pallet jack and forklift.

    Resistant and Durable
    Our Pallet Cushions have been through rigorous stress tests. They can be dragged on concrete and joints for 3000 feet, at maximum load, with only minimal wear noted. Suitable for use between -104°F and +130°F (-40°C to + 54°C) and chemical resistant.


    Material: Polyethylene

    5/16 - 18 UNC Pallet Cushions

    Part No.FinishLoad Capacity (Kg)Load Capacity (Lb)FixingWeight
    6035 Shopping CartTan9.1Kg - 15.9Kg20Lb - 35Lb5/16 - 18 UNC0.12kg/0.26lb
    6050 Shopping CartGreen13.6Kg - 22.7Kg30Lb - 50Lb5/16 - 18 UNC0.14kg/0.3lb
    6080 Shopping CartYellow20.4Kg - 36.3Kg50Lb - 80Lb5/16 - 18 UNC0.16kg/0.34lb
    6125 Shopping CartBlue31.8Kg - 56.7Kg70Lb - 125Lb5/16 - 18 UNC0.18kg/0.39lb
    6225 Shopping CartOrange56.7Kg - 102Kg125Lb - 225Lb5/16 - 18 UNC0.19kg/0.43lb

    M8 Pallet Cushions

    Part No.FinishLoad Capacity (Kg)Load Capacity (Lb)FixingWeight
    6050-M8 Shopping CartGreen13.6Kg - 22.7Kg30Lb - 50LbM80.14kg/0.3lb
    6080-M8 Shopping CartYellow20.4Kg - 36.3Kg50Lb - 80LbM80.16kg/0.34lb
    6125-M8 Shopping CartBlue31.8Kg - 56.7Kg70Lb - 125LbM80.18kg/0.39lb
    6225-M8 Shopping CartOrange56.7Kg - 102Kg125Lb - 225LbM80.19kg/0.43lb

    6228 - Series 6 Pallet Spacer

    Image of 6228
    Pallet Cushion Spacer to Suits 6035 - 6225 Pallet Cushions.

    Spacer Height: 1-1/16” / 26.8mm
    Increases...

    6228 - Series 6 Pallet Spacer

    Image of 6228
    Image of 6228 Image of 6228 Image of 6228
    Pallet Cushion Spacer to Suits 6035 - 6225 Pallet Cushions.

    Spacer Height: 1-1/16” / 26.8mm
    Increases cushion height to 3-3/4” / 95mm
    Material: Plastic
    Part No.DescriptionWeight
    6228 Shopping CartCrating Pallet Cushion Spacer0.15kg/0.34lb

    7035 - 7225 - Series 7 Pallet Cushions NEW!

    Image of 7035 - 7225
    Series 7 Air-Dampened Pallet Cushions.

    Cushion Height: 2-7/8" / 73mm
    Cushion + Spacer = 4” / 102mm

    Use Spacer ...

    7035 - 7225 - Series 7 Pallet Cushions NEW!

    Image of 7035 - 7225
    Image of 7035 - 7225 Image of 7035 - 7225 Image of 7035 - 7225
    Series 7 Air-Dampened Pallet Cushions.

    Cushion Height: 2-7/8" / 73mm
    Cushion + Spacer = 4” / 102mm

    Use Spacer 7228

    Our Pallet Cushions are the most economical and reliable way to replace and upgrade wooden skid runners on pallet crates, eliminating the need for costly air-ride trucks, these air-dampened polyethylene cushions are easily attached to pallets or crates to provide a high level of protection from shock and vibration.
    Don’t risk shipment damage by shocks, drops, and impact during transit or handling.

    Easy to Install
    The pre-installed t-nut, with a 5/16”-18 UNC thread, protrudes out of the cushions for easy location into the mounting hole and fast installation. (Also available with an M8 threaded t-nut or without t-nut)
    The pallet cushions are mounted directly on a pallet or container base with a simple bolt.

    Reusable
    The pallet cushions can be easily removed and mounted again on another pallet.
    Simple and Practical
    Our Series 7 Pallet Cushions, once fitted with the 7228 Spacer, create a four-way 4” space under the pallet, which makes it easy to load and unload with a pallet jack and forklift.

    Textured Finish
    The Series 7 Pallet Cushions has a textured finish for a better grip.

    Resistant and Durable
    Our Pallet Cushions have been through rigorous stress tests. They can be dragged on concrete and joints for 3000 feet, at maximum load, with only minimal wear noted. Suitable for use between -104°F and +130°F (-40°C to + 54°C) and chemical resistant.


    Material: Polyethylene

    5/16 - 18 UNC

    Part No.FinishLoad Capacity (Lb)Load Capacity (Kg)FixingWeight
    7035Tan20Lb - 35Lb9.1Kg - 15.9Kg5/16 - 18 UNC0.11kg/0.25lb
    7050Green30Lb - 50Lb13.6Kg - 22.7Kg5/16 - 18 UNC0.13kg/0.29lb
    7080Yellow50Lb - 80Lb20.4Kg - 36.3Kg5/16 - 18 UNC0.16kg/0.36lb
    7125Blue70Lb - 125Lb31.8Kg - 56.7Kg5/16 - 18 UNC0.19kg/0.43lb
    7225Orange125Lb - 225Lb56.7Kg - 102Kg5/16 - 18 UNC0.24kg/0.53lb

    M8

    Part No.FinishLoad Capacity (Lb)Load Capacity (Kg)FixingWeight
    7035-M8Tan20Lb - 35Lb9.1Kg - 15.9KgM80.11kg/0.25lb
    7050-M8Green30Lb - 50Lb13.6Kg - 22.7KgM80.13kg/0.29lb
    7080-M8Yellow50Lb - 80Lb20.4Kg - 36.3KgM80.16kg/0.36lb
    7125-M8Blue70Lb - 125Lb31.8Kg - 56.7KgM80.19kg/0.43lb
    7225-M8Orange125Lb - 225Lb56.7Kg - 102KgM80.24kg/0.53lb

    No T-Nut

    Part No.FinishLoad Capacity (Lb)Load Capacity (Kg)FixingWeight
    7035-NTTan20Lb - 35Lb9.1Kg - 15.9KgNo T-Nut0.11kg/0.24lb
    7050-NTGreen30Lb - 50Lb13.6Kg - 22.7KgNo T-Nut0.12kg/0.28lb
    7080-NTYellow50Lb - 80Lb20.4Kg - 36.3KgNo T-Nut0.16kg/0.34lb
    7125-NTBlue70Lb - 125Lb31.8Kg - 56.7KgNo T-Nut0.19kg/0.41lb
    7225-NTOrange125Lb - 225Lb56.7Kg - 102KgNo T-Nut0.24kg/0.52lb

    7228 - Series 7 Pallet Spacer NEW!

    Image of 7228
    Pallet Cushion Spacer to Suits 7035 - 7225 Pallet Cushions.

    Spacer Height: 1-1/8" / 28.6mm
    Increa...

    7228 - Series 7 Pallet Spacer NEW!

    Image of 7228
    Image of 7228 Image of 7228 Image of 7228
    Pallet Cushion Spacer to Suits 7035 - 7225 Pallet Cushions.

    Spacer Height: 1-1/8" / 28.6mm
    Increases cushion height to 4" / 102mm




    Part No.Description
    7228Crating Pallet Cushion Spacer

    P1390GLV - Pallet Collar Hinge

    Image of P1390GLV
    Pallet Collar Hinge with Removable Pin

    220mm x 87mm x 1.5mm / 8.66" x 3.43" x 1/16"

    P1390GLV - Pallet Collar Hinge

    Image of P1390GLV
    Image of P1390GLV Image of P1390GLV Image of P1390GLV Image of P1390GLV Image of P1390GLV
    Pallet Collar Hinge with Removable Pin

    220mm x 87mm x 1.5mm / 8.66" x 3.43" x 1/16"
    Material: Galvanized Steel
    Part No.FinishDescription
    P1390GLV Shopping CartGalvanizedPallet Collar Hinge with Removable Pin

    1903 - 1908 Strap Hinges

    Image of 1903 - 1908
    Strap Hinges

    1903 - 1908 Strap Hinges

    Image of 1903 - 1908
    Image of 1903 - 1908 Image of 1903 - 1908 Image of 1903 - 1908
    Strap Hinges
    Part No.FinishHeight (H)Width (W)Holes (D)Thickness (T)Material ThicknessWeight
    1903 Shopping CartZinc75mm / 3"32mm / 1.26"Ø5mm / 3/16"8mm / 5/16"1.5mm / 1/16"98g/0.22lb
    1904 Shopping CartZinc100mm / 4”31.6mm / 1.24"Ø5.5mm / 3/16"8mm / 5/16"2.5mm / 3/32"0.12kg/0.26lb
    1906 Shopping CartZinc150mm / 6”66mm / 2.6"Ø7mm / 1/4"14mm / 9/16"2.5mm / 3/32"0.3kg/0.65lb
    1908 Shopping CartZinc200mm / 8"73.7mm / 2.9"Ø7.5mm / 5/16"14mm / 9/16"2.5mm / 3/32"0.42kg/0.93lb

    E0090 Large Pallet Skid

    Image of E0090
    Large pallet skid.

    116mm x 90mm / 4.57" x 3.54"

    Allows cases without wheels or with removable wheels to be handled with fork lift or pallet truck.

    E0090 Large Pallet Skid

    Image of E0090
    Image of E0090 Image of E0090
    Large pallet skid.

    116mm x 90mm / 4.57" x 3.54"

    Allows cases without wheels or with removable wheels to be handled with fork lift or pallet truck.
    Material: 3.25mm / 1/8" Aluminium 6063-T5
    Part No.LengthWeight
    E00904m / 157"9.44kg/20.81lb

    5387GREY

    Image of 5387GREY
    Heavy Duty Corner Protector, PVC with Steel Insert.

    5387GREY

    Image of 5387GREY
    Image of 5387GREY Image of 5387GREY
    Heavy Duty Corner Protector, PVC with Steel Insert.
    Material: PVC/Steel
    Part No.FinishDescriptionWeight
    5387GREYGreyPVC/Steel0.16kg/0.36lb

    1659

    Image of 1659
    Large #4 Spring-Lock.

    1659

    Image of 1659
    Image of 1659 Image of 1659
    Large #4 Spring-Lock.

    Material: Spring Steel
    Part No.FinishDescriptionWeight
    1659 Shopping CartZinc54g/0.12lb

    1657

    Image of 1657
    Medium #3 Spring-Lock.

    1657

    Image of 1657
    Image of 1657 Image of 1657
    Medium #3 Spring-Lock.

    Material: Spring Steel
    Part No.FinishDescriptionWeight
    1657 Shopping CartZinc88g/0.19lb

    1656

    Image of 1656
    Small #2 Spring-Lock.

    1656

    Image of 1656
    Image of 1656 Image of 1656
    Small #2 Spring-Lock.

    Material: Spring Steel
    Part No.FinishDescriptionWeight
    1656 Shopping CartZinc31g/0.068lb

    1651

    Image of 1651
    Cleat Lock #1 with Dimples

    1651

    Image of 1651
    Image of 1651 Image of 1651
    Cleat Lock #1 with Dimples
    Material: 1mm / 20 gauge Steel
    Part No.FinishDescription
    1651 Shopping CartZinc

    1652

    Image of 1652
    Cleat Lock #2 with Dimples

    1652

    Image of 1652
    Image of 1652 Image of 1652
    Cleat Lock #2 with Dimples
    Material: 1mm / 20 gauge Steel
    Part No.FinishDescription
    1652 Shopping CartZinc

    1652PLAIN

    Image of 1652PLAIN
    Cleat Lock #2 without Dimples

    1652PLAIN

    Image of 1652PLAIN
    Image of 1652PLAIN Image of 1652PLAIN
    Cleat Lock #2 without Dimples
    Material: 1mm / 20 gauge Steel
    Part No.FinishDescription
    1652-PLAINZinc

    ShockWatch® 2 Impact Indicators

    Image of ShockWatch® 2
    ShockWatch® 2 Impact Indicators are tamper-proof single-use, go/no-go devices that determine if fragile products have been dropped during transit or in storage.
    The indicators are not armed until activated by the user.
    Tu...

    ShockWatch® 2 Impact Indicators

    Image of ShockWatch® 2
    Image of ShockWatch® 2 Image of ShockWatch® 2 Image of ShockWatch® 2
    ShockWatch® 2 Impact Indicators are tamper-proof single-use, go/no-go devices that determine if fragile products have been dropped during transit or in storage.
    The indicators are not armed until activated by the user.
    Turn bright red when an impact beyond a specific G-force threshold has occurred.

    Each ShockWatch® 2 has a unique identifier to support traceability.

    The Warning Label fits over the ShockWatch® and shows what to do if the impact detection device has been activated.
    Warning Label Dimensions: 114.3mm x 146.05mm / 4.5" x 5.75"

    Not Available in the USA

    ShockWatch® 2

    Part No.FinishDescriptionSensitivity
    48000KYellowSerialized, includes framing label25G force
    49000KPurpleSerialized, includes framing label35G force
    50000KRedSerialized, includes framing label50G force
    51000KOrangeSerialized, includes framing label75G force

    Companion Labels

    Part No.FinishDescriptionSensitivity
    26105
    26106
    26107
    Single Warning Label
    Warning Labels - 200 Labels per roll
    Warning Labels - 500 Labels per roll

    Tiltwatch XTR® Tilt Indicators

    Image of Tiltwatch XTR®
    The TiltWatch XTR® is a single-use tip indicator used to monitor goods that must remain upright. It turns red if the package is tilted past 80°. However, it remains unaffected by movement due to normal handling conditions.
    ...

    Tiltwatch XTR® Tilt Indicators

    Image of Tiltwatch XTR®
    The TiltWatch XTR® is a single-use tip indicator used to monitor goods that must remain upright. It turns red if the package is tilted past 80°. However, it remains unaffected by movement due to normal handling conditions.

    The warning label fits over the Tiltwatch XTR® and shows what to do if the tilt detection device has been activated.
    Warning label dimensions: 146mm x 222.25mm / 5.75" x 8.75"

    TiltWatch

    Part No.Description
    24101TiltWatch XTR®

    Companion Labels

    Part No.Description
    26101
    26102
    26103
    Single TiltWatch XTR® Warning label
    TiltWatch XTR® Warning labels - 200 labels/roll
    TiltWatch XTR® Warning labels - 500 labels/roll

    2698

    Image of 2698
    Heavy Duty 152.4mm / 6" Padlock Hasp.
    Comes with Staple.

    2698

    Image of 2698
    Image of 2698 Image of 2698 Image of 2698
    Heavy Duty 152.4mm / 6" Padlock Hasp.
    Comes with Staple.
    Material: Steel
    Part No.FinishDescriptionWeight
    2698 Shopping CartZinc0.28kg/0.62lb

    7568

    Image of 7568
    Large Surface Mount Twist Latch. Flat Cam. Spring-Loaded.

    7568

    Image of 7568
    Image of 7568 Image of 7568
    Large Surface Mount Twist Latch. Flat Cam. Spring-Loaded.

    Use Keeper Plate 0371 (Not Included)
    Material: Steel
    Part No.FinishDescriptionWeight
    7568 Shopping CartZinc0.16kg/0.35lb
    7568SSStainless Steel0.16kg/0.35lb

    2017

    Image of 2017
    Surface mount twist latch protector plate with protective ridges.

    For use with 1/2" plywood.

    Works with with large twist latches ...

    2017

    Image of 2017
    Image of 2017 Image of 2017
    Surface mount twist latch protector plate with protective ridges.

    For use with 1/2" plywood.

    Works with with large twist latches 7536, 7538 and 7568.

    Also available with Latch Pre-Riveted Latch 2017-7568
    Material: Steel
    Part No.FinishDescriptionWeight
    2017 Shopping CartZincProtector Plate Large Twist Latches0.16kg/0.35lb

    2017MP - NEW!

    Image of 2017MP
    Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included)

    The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood...

    2017MP - NEW!

    Image of 2017MP
    Image of 2017MP Image of 2017MP Image of 2017MP
    Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included)

    The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood.

    Works with large twist latches 7536, 7538 and 7568.
    Part No.FinishDescription
    2017MPZincMulti-position surface mount twist latch protector NEW!

    2017-7568

    Image of 2017-7568
    Large Surface Mount Twist Latch 7568 Pre-Riveted into ...

    2017-7568

    Image of 2017-7568
    Image of 2017-7568 Image of 2017-7568
    Large Surface Mount Twist Latch 7568 Pre-Riveted into 2017 protector plate with protective ridges.

    2017 protector plate also sold separately
    Use Keeper Plate 0371 (Not Included).
    Material: Steel
    Part No.FinishDescriptionWeight
    2017-7568 Shopping CartZincLarge Surface Latch in protector plate0.33kg/0.73lb

    7339

    Image of 7339
    Small Surface Mount Twist Latch. Padlockable.

    Use Keeper Plate 0334 (Not Included).

    7339

    Image of 7339
    Image of 7339 Image of 7339
    Small Surface Mount Twist Latch. Padlockable.

    Use Keeper Plate 0334 (Not Included).
    Material: Steel
    Part No.FinishDescriptionWeight
    7339Zinc58g/0.13lb
    7339BKBlack58g/0.13lb
    7339SSStainless Steel58g/0.13lb

    7538

    Image of 7538
    Large Surface Mount Twist Latch. Flat Cam.

    7538

    Image of 7538
    Image of 7538 Image of 7538
    Large Surface Mount Twist Latch. Flat Cam.

    Use Keeper Plate 0371 (Not Included)
    Material: Steel
    Part No.FinishDescriptionWeight
    7538 Shopping CartZinc0.13kg/0.29lb
    7538SSStainless Steel0.13kg/0.29lb

    7589

    Image of 7589
    Large Surface Mount Twist Latch. Padlockable. Spring-Loaded.

    7589

    Image of 7589
    Image of 7589 Image of 7589
    Large Surface Mount Twist Latch. Padlockable. Spring-Loaded.

    Use Keeper Plate 2011 (Not Included)
    Material: Steel
    Part No.FinishDescriptionWeight
    7589
    7583
    7569
    ZincFlat Cam
    Flat Cam, No Spring
    Hex Cam
    Part No.FinishDescriptionWeight
    Image of 2011
    2011
    ZincCatch Plate29g/0.064lb

    7566

    Image of 7566
    Large Surface Mount Twist Latch. Spring-Loaded.

    7566

    Image of 7566
    Image of 7566 Image of 7566
    Large Surface Mount Twist Latch. Spring-Loaded.

    Use Keeper Plate 0371 (Not Included)
    Material: Steel
    Part No.FinishDescriptionWeight
    7566Zinc0.16kg/0.35lb

    7536

    Image of 7536
    Large Surface Mount Twist Latch.

    7536

    Image of 7536
    Image of 7536 Image of 7536
    Large Surface Mount Twist Latch.

    Use Keeper Plate 0371 (Not Included)
    Material: Steel
    Part No.FinishDescriptionWeight
    7536Zinc0.13kg/0.29lb

    7335

    Image of 7335
    Small Surface Mount Twist Latch with Exposed Mounting Hole. Flat Cam.
    Use Keeper Plate 0334 (Not Included).

    7335

    Image of 7335
    Image of 7335 Image of 7335
    Small Surface Mount Twist Latch with Exposed Mounting Hole. Flat Cam.
    Use Keeper Plate 0334 (Not Included).
    Material: Steel
    Part No.FinishDescriptionWeight
    7335 Shopping CartZinc43g/0.095lb
    7335SSStainless Steel43g/0.095lb

    7365

    Image of 7365
    Small Surface Mount Twist Latch. Flat Cam. Spring-Loaded. Exposed Mounting Hole.

    Use Keeper Plate 0334 (Not Included...

    7365

    Image of 7365
    Image of 7365 Image of 7365
    Small Surface Mount Twist Latch. Flat Cam. Spring-Loaded. Exposed Mounting Hole.

    Use Keeper Plate 0334 (Not Included).
    Material: Steel
    Part No.FinishDescriptionWeight
    7365
    7365BK
    Zinc
    Black
    45g/0.099lb
    7365BK-16Black4mm / 3/16" Mounting Holes45g/0.099lb

    7460

    Image of 7460
    Medium Twist Latch. Spring Loaded.

    Keeper Plate Not Included

    7460

    Image of 7460
    Image of 7460 Image of 7460
    Medium Twist Latch. Spring Loaded.

    Keeper Plate Not Included
    Material: Steel
    Part No.FinishDescription
    7460Zinc
    7435ZincUnsprung Version

    L905/55/915Z Crating Latch

    Image of L905/55/915Z
    Medium Latch with Lid Catch Plate.

    For use with wooden crate panels 18mm / 11/16" thick.

    L905/55/915Z Crating Latch

    Image of L905/55/915Z
    Image of L905/55/915Z Image of L905/55/915Z Image of L905/55/915Z
    Medium Latch with Lid Catch Plate.

    For use with wooden crate panels 18mm / 11/16" thick.
    Material: Steel
    Part No.FinishDescriptionWeight
    L905/55/915ZPennbriteMedium Latch with Lid Catch Plate
    L090555/CPZincLid Catch Plate54g/0.12lb
    Penn Elcom Logo