Hinges

Double Hinge in 27mm / 1 1/16" Offset Dish. (Offset on one side of the dish only)

Replaces standard piano hinges to provide a sturdier, safer lid fastening solution that allows for a full 270° lid rotation.

The hinges are sunk to protect from accidental impacts that could deform surface-mounted hinges and render the lid inoperable. The double-knuckle design means the lid can rest neatly against the case so all sides are easily accessible.

Works with aluminium extrusion E0490

Hinged Corner Brace, Offset for 30mm / 1.18" Corner Extrusion and 22mm / 7/8" Edge Extrusion

Hinged Corner Brace with tight radius

Hinged Corner Brace, based on B1130-25 Large Brace

Hinged Corner Brace, based on B1132 Large Brace.

Heavy Duty Hinge.

For Hinge Stop see P0635.

Pre-Punched Hinge.

4 Hole Hinge
38mm x 90mm / 1.5" x 3.54"

Heavy Duty Hinge

Countersunk Angle: 82°

Hinge Stop use with P0610 or Piano Hinge

Hinge

50.8mm x 38.1mm / 2" x 1.5" Open

Pre-Punched Hinge.

102mm x 102mm / 4.02" x 4.02" Hinge with Staggered Mounting Holes.

83.5mm / 3.29" Double Hinge, 70mm / 2.76" Long

Field Dressed Stainless Steel Hinge


For a full range of Field Dressed hardware please enter 'Field Dressed' in the search window and click 'Search'

42mm / 1.65" Open Hinge, 178mm / 7.01" Length.


Punched 51mm / 2.01" Centres.

Strap Hinges

The new R50335 is a door hinge mounted on a 555mm / 21.85" drawer slide that allows you to slide a trap door within a rackmount case when in use. With a simple panel and a slam lock, you can easily create a door that can be hidden within the case when opened.

Perfect to build standard 600mm x 600mm / 23.5" x 23.5" shock mount rack cases

For use with R8800 Anti-Vibration Rack Systems: the easiest way to build a shock mount rack case. Use crossbar R8800-70 for additional space to fit the sliding door.

For use with 30mm / 1 3/16" extrusions: E0885, E2270, E2390, E2265, EG-0162, EG-0166, E0875, E6426 and E0876

Sold in Pairs

Extended Load Capacity: 10kg / 22lb per pair

The new R50338 is a door hinge-mounted to on a 610mm / 24.02" drawer slide that allows you to slide a pocket door within a rackmount case when in use. With a simple panel and a slam lock, you can easily create a door that can be hidden within the case when opened.

Perfect to build standard 610mm x 762mm / 24" x 30" shock-mount rack cases. Use crossbar R8800-70 for additional space to fit the sliding door.

For use with R8800 Anti-Vibration Rack Systems: the easiest way to build a shock mount rack case.
For use with 35mm / 1.38" extrusions: 3070, 3023, E2250 and E2255

Sold in Pairs

Extended Load Capacity: 10kg / 22lb per pair

Pallet Collar Hinge with Removable Pin

220mm x 87mm x 1.5mm / 8.66" x 3.43" x 1/16"