Slam Latches

Small Slam Latch for Slam-Lid System.

Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

65% the size of L2470

Use Cover Plate L2455/MBZ for a professional and flawless appearance

Can be used with Extrusion E0490, Corner C0675/30 and Hook P2472

Cover plate for L2455 Small Slam Latch

- An aesthetic finish: once mounted over the slam latch access hole, the cover plate creates a professional and flawless appearance
- Save time: thanks to its indent, the plate covers the exposed edges of the access hole, providing a smooth finish without the need to sand

Slam Latch for Slam-Lid System.

Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

Use Cover Plate L2470-2/MBZ for a professional and flawless appearance

Can be used with Extrusion E0490, Corner C0675/30 and Hook P2472

Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case.

Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

Use Cover Plate L2470-2/MBZ for a professional and flawless appearance

Can be used with Extrusion E0490, Corner C0675/30 and Hook P2472

Lockable Slam Latch for Slam-Lid System, with tabs so lid can be hooked on to side of the case.

Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

Use Cover Plate L2470-2/MBZ for a professional and flawless appearance

Can be used with Extrusion E0490, Corner C0675/30 and Hook P2472

Cover plate for L2470, L2471 and L2472 Slam Latches

- An aesthetic finish: once mounted over the slam latch access hole, the cover plate creates a professional and flawless appearance
- Save time: thanks to its indent, the plate covers the exposed edges of the access hole, providing a smooth finish without the need to sand

Slam Latch for Slam-Lid System.

Easy assembly - Drill or route a finger hole and attach Slam Latch aligned on inside of the lid. To release lid insert finger and disengage the latch and pull the lid off.

Use Cover Plate L2473/MBZ for a professional and flawless appearance

Cover plate for L2473 Slam Latch

- An aesthetic finish: once mounted over the slam latch access hole, the cover plate creates a professional and flawless appearance
- Save time: thanks to its indent, the plate covers the exposed edges of the access hole, providing a smooth finish without the need to sand

Low Level Key Lockable Slam Latch for Slam-Lid System

Catch Plate for L2572 Slam Latch.

Suits Extrusion E0490

2 Leg Cranked Wrap-Around Corner for Slam-Lid System.

Works with Slam Latch L2470, Extrusion E0490 and Hook P2472

Hook for Slam-Lid System.

Works with Slam Latch L2470, Extrusion E0490 and Corner C0675/30

LSD1 is a discrete locating and anti-rattle accessory to be used with Penn Elcom slam latches L2455 and L2470.

Designed for easy installation, just position LDS1 behind the door frame so the slam latch slider self-locates when the door is shut - giving a firm, no-rattle fit.

Also ideal for use with latch doors on profile-free cases.

Ultra Slim Slam Latch.

Works with Extrusion E0490 and Catch Plate L2572-CP

Patent Pending
Gebrauchsmusterschutz. Registered 20 2014 101 233

Heavy Duty Slam Latch

Small Slam Latch

Medium Slam Latch

Large Slam Latch

Small Slam Latch with Key Lock

Small Slam Latches panels from 1.2mm / 0.05" to 1.5mm / 1/16" thick

Replacement part for: R1272, R1272V, R1291K/2L and R1380

Wide Slam Latches for 1.2mm / 0.05" or 2mm / 0.08" thick panels.

3232 SLAM Replacement part for R2293, R2295, and 3232LK - 3236LK Rack Drawers

R1292 SLAM Replacement part for R1292 - R1394 Rack Drawers

The new R50335 is a door hinge mounted on a 555mm / 21.85" drawer slide that allows you to slide a trap door within a rackmount case when in use. With a simple panel and a slam lock, you can easily create a door that can be hidden within the case when opened.

Perfect to build standard 600mm x 600mm / 23.5" x 23.5" shock mount rack cases

For use with R8800 Anti-Vibration Rack Systems: the easiest way to build a shock mount rack case. Use crossbar R8800-70 for additional space to fit the sliding door.

For use with 30mm / 1 3/16" extrusions: E0885, E2270, E2390, E2265, EG-0162, EG-0166, E0875, E6426 and E0876

Sold in Pairs

Extended Load Capacity: 10kg / 22lb per pair

The new R50338 is a door hinge-mounted to on a 610mm / 24.02" drawer slide that allows you to slide a pocket door within a rackmount case when in use. With a simple panel and a slam lock, you can easily create a door that can be hidden within the case when opened.

Perfect to build standard 610mm x 762mm / 24" x 30" shock-mount rack cases. Use crossbar R8800-70 for additional space to fit the sliding door.

For use with R8800 Anti-Vibration Rack Systems: the easiest way to build a shock mount rack case.
For use with 35mm / 1.38" extrusions: 3070, 3023, E2250 and E2255

Sold in Pairs

Extended Load Capacity: 10kg / 22lb per pair