This website uses cookies. By continuing to use this website you agree to our use of cookies. For more information visit our Cookies Policy
  • World IconEnglish
  • Home: New Products

    FW21 - QuickClamp™ Corner Brace NEW!

    Image of FW21
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for...

    FW21 - QuickClamp™ Corner Brace NEW!

    Image of FW21
    Image of FW21 Image of FW21 Image of FW21
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for costly miter cutting.

    For use with E2395 Hybrid Extrusion.
    Material: Die-cast Steel
    Part No.FinishDescription
    FW21ZincFemale QuickClamp Corner Brace for use with E2395 Hybrid Extrusion
    FW21BZincMale QuickClamp Corner Brace for use with E2395 Hybrid Extrusion

    L0922-TSA-COMBI - TSA Certified Padlock NEW!

    Image of L0922-TSA-COMBI
    Transport Security Administration (TSA) personnel in all U.S. airports are authorised to gain entry to suitcases for security screenings. If the luggage is locked, this results in its removal and destruction.

    TSA compliant and branded lo...

    L0922-TSA-COMBI - TSA Certified Padlock NEW!

    Image of L0922-TSA-COMBI
    Image of L0922-TSA-COMBI Image of L0922-TSA-COMBI
    Transport Security Administration (TSA) personnel in all U.S. airports are authorised to gain entry to suitcases for security screenings. If the luggage is locked, this results in its removal and destruction.

    TSA compliant and branded locks can be opened by all security staff and then locked again instead.

    Part No.DescriptionWeight
    L0922-TSA-COMBITSA Certified Padlock NEW! 42g/0.093lb

    EX-6302 - 2U Laptop Drawer NEW!

    Image of EX-6302
    19” Rack Mountable 2U Vented Laptop/Tablet Drawer with Foam Wrist-Pad for support and rear cable access.
    Key lockable.

    Inside Dimensions:
    Width x Depth x Height = 409.5mm x 338.5mm x 77.1mm / 16.12" x 13.33" x 3.04...

    EX-6302 - 2U Laptop Drawer NEW!

    Image of EX-6302
    Image of EX-6302 Image of EX-6302 Image of EX-6302
    19” Rack Mountable 2U Vented Laptop/Tablet Drawer with Foam Wrist-Pad for support and rear cable access.
    Key lockable.

    Inside Dimensions:
    Width x Depth x Height = 409.5mm x 338.5mm x 77.1mm / 16.12" x 13.33" x 3.04"
    Material: 1.2mm / 18 gauge Steel
    Part No.DescriptionHeight (U)
    EX-630219” Rack Laptop Drawer NEW! 2U

    D0553-SD - Lid Stay with Anti-Slam System NEW!

    Image of D0553-SD
    Spring-loaded Lid Stay with anti-slam safety system that keeps the lid open, avoiding accidental closure of heavy lids.

    Our innovative new spring function holds the lid open even if knocked or tipped. Until the...

    D0553-SD - Lid Stay with Anti-Slam System NEW!

    Image of D0553-SD
    Image of D0553-SD Image of D0553-SD Image of D0553-SD
    Spring-loaded Lid Stay with anti-slam safety system that keeps the lid open, avoiding accidental closure of heavy lids.

    Our innovative new spring function holds the lid open even if knocked or tipped. Until the lid is pushed beyond the safety margin, this lid stay will hold it open, preventing unwanted or dangerous closure.

    Safety margin = 80° ~ 70° dependant on weight of lid. Test before use.

    Part No.FinishDescription
    D0553Z-SDPennBrite™Lid Stay with Spring-loaded System NEW!

    L3000-7 Interlocking Case Stacking Latch NEW!

    Image of L3000-7
    New case stacking latch allows you to lock two cases together, ensuring they cannot separate.

    This latch system is designed to work with our new ...

    L3000-7 Interlocking Case Stacking Latch NEW!

    Image of L3000-7
    Image of L3000-7 Image of L3000-7 Image of L3000-7 Image of L3000-7
    New case stacking latch allows you to lock two cases together, ensuring they cannot separate.

    This latch system is designed to work with our new C1351-STACK large ball corner with interlocking cut-outs and makes handling and storing large amounts of cases much easier.


    Part No.FinishDescription
    L3000-7PennBriteCase Stacking Latch NEW!

    W8981 - Universal Double Sided Castor Plate NEW!

    Image of W8981
    Universal
    This castor plate is designed to fit on any corner of a flight case panel and works simply by reversing or flipping it. Now you only need to purchase one universal product so there’s no longer a need to buy and keep d...

    W8981 - Universal Double Sided Castor Plate NEW!

    Image of W8981
    Image of W8981 Image of W8981 Image of W8981 Image of W8981
    Universal
    This castor plate is designed to fit on any corner of a flight case panel and works simply by reversing or flipping it. Now you only need to purchase one universal product so there’s no longer a need to buy and keep different sided plates.

    Shock-Resistant
    The new design is also highly shock-resistant compared to older models and significantly improves durability.

    Lid Rest for Heavy Front and Rear lids
    The unique design also provides clever ‘resting tabs’ for the safe removal and replacing of heavy front and back case lids. The plates are flush to the fitted lids when closed and when the lid is off, extend enough to become a firm rest. This allows you to safely seat the lid before fitting.
    Part No.FinishDescription
    W8981BlackCastor Plate NEW!

    D0557-DW - WeatherSeal™ NEW!

    Image of D0557-DW
    Large WeatherSeal™ Lid Stay in Offset Dish

    New WeatherSeal™ technology with integrated rubber seal eliminates the gap in between the two parts of the dish and creates seamless dishes that close the lid tighter...

    D0557-DW - WeatherSeal™ NEW!

    Image of D0557-DW
    Image of D0557-DW Image of D0557-DW Image of D0557-DW Image of D0557-DW
    Large WeatherSeal™ Lid Stay in Offset Dish

    New WeatherSeal™ technology with integrated rubber seal eliminates the gap in between the two parts of the dish and creates seamless dishes that close the lid tighter.

    Dust and water resistant lid stay keeps contents safer from ingress when closed

    Split to Hole Centre: 13mm / 1/2"
    Part No.FinishDescriptionDish DepthOffset
    D0557Z-DWPennBrite™WeatherSeal™ Lid Stay NEW! 10mm / 3/8"27mm / 1 1/16"

    MOL3DW - WeatherSeal™ MOL®3 Latch NEW!

    Image of MOL3DW
    Large WeatherSeal™ MOL®3 Latch in Offset Dish
    Split to Hole Centre 13mm / 1/2"

    New WeatherSeal™ technology with integrated rubber seal eliminates the gap in between the tw...

    MOL3DW - WeatherSeal™ MOL®3 Latch NEW!

    Image of MOL3DW
    Image of MOL3DW Image of MOL3DW Image of MOL3DW Image of MOL3DW
    Large WeatherSeal™ MOL®3 Latch in Offset Dish
    Split to Hole Centre 13mm / 1/2"

    New WeatherSeal™ technology with integrated rubber seal eliminates the gap in between the two parts of the dish and creates seamless dishes that close the lid tighter.


    Dust and water resistant lid stay keeps contents safer from ingress when closed

    The new patented Cantilever Automatic Open/Close function allows the latch to automatically engage with the catch plate, making it easier to close the lid even with very low or no light.



    Part No.FinishDescriptionDish DepthOffsetLockableLatch Option
    MOL3DWPennBrite™Offset WeatherSeal™ Dish NEW! 10mm / 3/8"27mm / 1 1/16"NoDustproof

    C7082-STACK NEW!

    Image of C7082-STACK
    Flat Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.

    3 Mounting Holes

    Internal Radius: 2mm / 0.08"

    Also available:
    ...

    C7082-STACK NEW!

    Image of C7082-STACK
    Image of C7082-STACK Image of C7082-STACK Image of C7082-STACK
    Flat Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.

    3 Mounting Holes

    Internal Radius: 2mm / 0.08"

    Also available:
    C1351-STACK large ball corner with offset.
    Material: 1.0mm / 20 gauge Steel
    Part No.FinishDescriptionStackable
    C7082Z-STACKPennBrite™Flat CornerInterlocking cut-outs

    4756-G NEW!

    Image of 4756-G
    Self-Adhesive Dustproof Gasket for 4756 Recessed Latch

    4756-G NEW!

    Image of 4756-G
    Image of 4756-G Image of 4756-G
    Self-Adhesive Dustproof Gasket for 4756 Recessed Latch
    Material: Neoprene
    Part No.DescriptionWeight
    4756-GGasket for 4756 Latch10g/0.022lb

    C1351-STACK NEW!

    Image of C1351-STACK
    Large Ball Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.
    Also available C7082-STAC...

    C1351-STACK NEW!

    Image of C1351-STACK
    Image of C1351-STACK Image of C1351-STACK Image of C1351-STACK
    Large Ball Corner with new interlocking cut-outs. Enables cases to stack and lock without slippage.
    Also available C7082-STACK medium flat corner.

    30mm / 1.18" Offset

    3 Mounting Holes

    Internal Radius: 1.5mm / 1/16"

    Additionally, the new L3000-7 case stacking latch allows to lockdown stacked cases, making it impossible for them to separate when moved around. This new system works perfectly with the new C1351-STACK large ball corner with new interlocking cut-outs and makes handling and storing large amounts of case much easier.



    Material: 1.5mm / 16 gauge Steel
    Part No.FinishDescriptionStackableOffsetWeight
    C1351-STACKPennBrite™Large Ball cornerInterlocking cut-outs30mm / 1.18"69g/0.15lb

    1 Gang Front Panel

    Image of 1 Gang Front Panel
    BoxesFront Panel for 1 Gang Pattress Boxes

    Available Plain or Punched for Neutrik D-Series Connectors (XLR, SpeakON,RJ45).

    Includes M3 fixing screws.

    1 Gang Front Panel

    Image of 1 Gang Front Panel
    Image of 1 Gang Front Panel Image of 1 Gang Front Panel
    BoxesFront Panel for 1 Gang Pattress Boxes

    Available Plain or Punched for Neutrik D-Series Connectors (XLR, SpeakON,RJ45).

    Includes M3 fixing screws.
    Material: 1.5mm / 16 gauge Steel
    Part No.FinishCornersConnectorsWeight
    81511-15
    81511-15-S
    Black
    Silver
    Square CornersBlank / Unpushed80g/0.18lb
    81511-20BlackSquare Corners1 x Neutrik D-Series Connector80g/0.18lb
    81511-RC
    81511-RCS
    81511-RCW
    Black
    Silver
    White
    Rounded Corners1 x Neutrik D-Series Connector80g/0.18lb
    82511-20BlackSquare Corners2 x Neutrik D-Series Connectors80g/0.18lb
    82511-RC
    82511-RCS
    82511-RCW
    Black
    Silver
    White
    Rounded Corners2 x Neutrik D-Series Connectors80g/0.18lb

    R4006 600mm / 24" Wide, Metric Threaded Rack Tower

    Image of R4006
    600mm / 23.62" Wide Rack Tower, with M6 Threaded Rail. With Lockable Shatterproof Polycarbonate Front Door & Lockable Plain back Door.

    Available Depths: 600mm / 23.62", 800mm / 31.5"...

    R4006 600mm / 24" Wide, Metric Threaded Rack Tower

    Image of R4006
    Image of R4006 Image of R4006
    600mm / 23.62" Wide Rack Tower, with M6 Threaded Rail. With Lockable Shatterproof Polycarbonate Front Door & Lockable Plain back Door.

    Available Depths: 600mm / 23.62", 800mm / 31.5" and 1m / 39"
    Available Heights: From 6U to 47U
    Available Front Doors: Shatterproof Polycarbonate, Plain Steel or Vented Steel

    Features
    - Simple assembly
    - Adjustable Threaded Rack Rails
    - Integral cable trays
    - Optional Side Door locks
    - Earth Points and Gangable
    - Can be built as open, sides only or closed tower versions
    - IP30 Version Available
    - 4 x W0950 Castor/Foot Included

    Custom Sizes & Colours Available.

    Material: Steel

    600mm x 600mm / 24" x 24" - Glass Door

    Part No.FinishSize (U)HeightWeight
    R4066-18UKBlack18U NEW! 902mm / 35.51"55kg/121.25lb
    R4066-22UKBlack22U1.08m / 43"62kg/136.69lb
    R4066-32UKBlack32U1.52m / 60"76kg/167.55lb
    R4066-37UKBlack37U1.75m / 69"83kg/182.98lb
    R4066-42UKBlack42U1.97m / 77"90kg/198.42lb
    R4066-47UKBlack47U2.19m / 86"97kg/213.85lb

    600mm x 600mm / 24" x 24" - Vented Door

    Part No.FinishSize (U)HeightWeight
    R4066-V-18UKBlack18U NEW! 902mm / 35.51"55kg/121.25lb
    R4066-V-22UKBlack22U1.08m / 43"61kg/134.48lb
    R4066-V-32UKBlack32U1.52m / 60"75kg/165.35lb
    R4066-V-37UKBlack37U1.75m / 69"82kg/180.78lb
    R4066-V-42UKBlack42U1.97m / 77"88kg/194.01lb
    R4066-V-47UKBlack47U2.19m / 86"95kg/209.44lb

    600mm x 800mm / 24" x 32" - Glass Door

    Part No.FinishSize (U)HeightWeight
    R4086-22UKBlack22U1.08m / 43"68kg/149.91lb
    R4086-32UKBlack32U1.52m / 60"88kg/194.01lb
    R4086-37UKBlack37U1.75m / 69"98kg/216.05lb
    R4086-42UKBlack42U1.97m / 77"108kg/238.1lb
    R4086-47UKBlack47U2.19m / 86"118kg/260.15lb

    600mm x 800mm / 24" x 32" - Vented Door

    Part No.FinishSize (U)HeightWeight
    R4086-V-22UKBlack22U1.08m / 43"67kg/147.71lb
    R4086-V-32UKBlack32U1.52m / 60"87kg/191.8lb
    R4086-V-37UKBlack37U1.75m / 69"97kg/213.85lb
    R4086-V-42UKBlack42U1.97m / 77"106kg/233.69lb
    R4086-V-47UKBlack47U2.19m / 86"116kg/255.74lb

    600mm x 1000mm / 24" x 40" - Glass Door

    Part No.FinishSize (U)HeightWeight
    R4106-22UKBlack22U1.08m / 43"75kg/165.35lb
    R4106-32UKBlack32U1.52m / 60"100kg/220.46lb
    R4106-37UKBlack37U1.75m / 69"112kg/246.92lb
    R4106-42UKBlack42U1.97m / 77"125kg/275.58lb
    R4106-47UKBlack47U2.19m / 86"140kg/308.65lb

    600mm x 1000mm / 24" x 40" - Vented Door

    Part No.FinishSize (U)HeightWeight
    R4106-V-22UKBlack22U1.08m / 43"74kg/163.14lb
    R4106-V-32UKBlack32U1.52m / 60"99kg/218.26lb
    R4106-V-37UKBlack37U1.75m / 69"111kg/244.71lb
    R4106-V-42UKBlack42U1.97m / 77"123kg/271.17lb
    R4106-V-47UKBlack47U2.19m / 86"138kg/304.24lb

    Doors & Accessories

    Part No.FinishDescriptionWeight
    R4006-BGD-xxUKBlackGlass Door, Replace xx with U size
    R4006-VFD-xxUKBlackPerforated Steel Door, Replace xx with U size
    R4006-PFD-xxUKBlackPlain Steel Door, Replace xx with U size
    R8295Set of 4 Adjuster Feet with M12 thread. Adds from 30mm / 1.18" (min) to 95mm / 3.74" (max)50g/0.11lb

    B1130-25-HINGE

    Image of B1130-25-HINGE
    Hinged Corner Brace, based on B1130-25 Large Brace

    B1130-25-HINGE

    Image of B1130-25-HINGE
    Image of B1130-25-HINGE Image of B1130-25-HINGE
    Hinged Corner Brace, based on B1130-25 Large Brace
    Material: 1.2mm / 18 gauge Steel
    Part No.FinishDescription
    B1130-25-HINGEPennBrite™Hinged Corner Brace NEW!

    FW14 - QuickClamp™ Corner Brace NEW!

    Image of FW14
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for...

    FW14 - QuickClamp™ Corner Brace NEW!

    Image of FW14
    Image of FW14 Image of FW14 Image of FW14
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for costly miter cutting.

    For use with 3022 Groove Extrusion and 3020 Tongue Extrusion.

    Material: Die-cast Steel

    Special Order Outside of the USA

    Part No.FinishDescription
    FW14ZincFemale QuickClamp Corner Brace for use with 3022 Groove Extrusion
    FW14BZincMale QuickClamp Corner Brace for use with 3020 Tongue Extrusion

    FW15 - QuickClamp™ Corner Brace NEW!

    Image of FW15
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for...

    FW15 - QuickClamp™ Corner Brace NEW!

    Image of FW15
    Image of FW15 Image of FW15 Image of FW15
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for costly miter cutting.

    For use with 3103 Groove Extrusion and 3100 Tongue Extrusion.

    Material: Die-cast Steel

    Special Order Outside of the USA

    Part No.FinishDescription
    FW15ZincFemale QuickClamp Corner Brace for use with 3103 Groove Extrusion
    FW15BZincMale QuickClamp Corner Brace for use with 3100 Tongue Extrusion

    FW16 - QuickClamp™ Corner Brace NEW!

    Image of FW16
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for...

    FW16 - QuickClamp™ Corner Brace NEW!

    Image of FW16
    Image of FW16 Image of FW16 Image of FW16
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for costly miter cutting.

    For use with 3105 Groove Extrusion and 3104 Tongue Extrusion.

    Material: Die-cast Steel

    Special Order Outside of the USA

    Part No.FinishDescription
    FW16ZincFemale QuickClamp Corner Brace for use with 3105 Groove Extrusion
    FW16BZincMale QuickClamp Corner Brace for use with 3104 Tongue Extrusion

    FW17 - QuickClamp™ Corner Brace NEW!

    Image of FW17
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for...

    FW17 - QuickClamp™ Corner Brace NEW!

    Image of FW17
    Image of FW17 Image of FW17 Image of FW17
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for costly miter cutting.

    For use with 3032 Groove Extrusion and 3030 Tongue Extrusion.


    Material: Die-cast Steel

    Special Order Outside of the USA

    Part No.FinishDescription
    FW17ZincFemale QuickClamp Corner Brace for use with 3032 Groove Extrusion
    FW17BZincMale QuickClamp Corner Brace for use with 3030 Tongue Extrusion

    FW18 - QuickClamp™ Corner Brace NEW!

    Image of FW18
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for...

    FW18 - QuickClamp™ Corner Brace NEW!

    Image of FW18
    Image of FW18 Image of FW18 Image of FW18
    Heavy duty die-cast corner braces with new QuickClamp interlocking system.

    These interlocking corner braces create a seamless transition between the tongue and groove extrusion and the corner brace, effectively eliminating the need for costly miter cutting.

    For use with 3025 Groove Extrusion and 3024 Tongue Extrusion.

    Material: Die-cast Steel

    Special Order Outside of the USA

    Part No.FinishDescription
    FW18ZincFemale QuickClamp Corner Brace for use with 3025 Groove Extrusion
    FW18BZincMale QuickClamp Corner Brace for use with 3024 Tongue Extrusion

    R4000-CT NEW!

    Image of R4000-CT
    Vertical cable management tray suitable for R4000 and R5000 server racks

    R4000-CT NEW!

    Image of R4000-CT
    Image of R4000-CT Image of R4000-CT
    Vertical cable management tray suitable for R4000 and R5000 server racks
    Material: 1.5mm / 16 gauge Steel
    Part No.FinishDescription
    R4000-CT-06UK
    R4000-CT-06UW
    Black
    White
    R4000 Cable Tray 6U Black NEW!
    R4000 Cable Tray 6U White
    R4000-CT-09UK
    R4000-CT-09UW
    Black
    White
    R4000 Cable Tray 9U Black NEW!
    R4000 Cable Tray 9U White
    R4000-CT-12UK
    R4000-CT-12UW
    Black
    White
    R4000 Cable Tray 12U Black NEW!
    R4000 Cable Tray 12U White
    R4000-CT-18UK
    R4000-CT-18UW
    Black
    White
    R4000 Cable Tray 18U Black NEW!
    R4000 Cable Tray 18U White
    R4000-CT-22UK
    R4000-CT-22UW
    Black
    White
    R4000 Cable Tray 22U Black NEW!
    R4000 Cable Tray 22U White
    R4000-CT-27UK
    R4000-CT-27UW
    Black
    White
    R4000 Cable Tray 27U Black NEW!
    R4000 Cable Tray 27U White
    R4000-CT-32UK
    R4000-CT-32UW
    Black
    White
    R4000 Cable Tray 32U Black NEW!
    R4000 Cable Tray 32U White
    R4000-CT-35UK
    R4000-CT-35UW
    Black
    White
    R4000 Cable Tray 35U Black NEW!
    R4000 Cable Tray 35U White
    R4000-CT-37UK
    R4000-CT-37UW
    Black
    White
    R4000 Cable Tray 37U Black NEW!
    R4000 Cable Tray 37U White
    R4000-CT-42UK
    R4000-CT-42UW
    Black
    White
    R4000 Cable Tray 42U Black NEW!
    R4000 Cable Tray 42U White
    R4000-CT-45UK
    R4000-CT-45UW
    Black
    White
    R4000 Cable Tray 45U Black NEW!
    R4000 Cable Tray 45U White
    R4000-CT-47UK
    R4000-CT-47UW
    Black
    White
    R4000 Cable Tray 47U Black NEW!
    R4000 Cable Tray 47U White

    50025 NEW!

    Image of 50025
    Hinged Corner Brace with tight radius

    50025 NEW!

    Image of 50025
    Image of 50025 Image of 50025
    Hinged Corner Brace with tight radius
    Material: 1.5mm / 16 gauge Steel
    Part No.FinishDescriptionRadiusOffset
    50025ZincHinged Corner BraceTightNo

    AC5MDZ NEW!

    Image of AC5MDZ
    Amphenol AC “Z” Series XLR 5 Pole Male in D Size Chassis Mount

    - D size housing can be front or rear mounted using the same panel cutout.
    - Stamped contacts
    - Silver Plating
    - Solder Bucket

    Compatible ...

    AC5MDZ NEW!

    Image of AC5MDZ
    Image of AC5MDZ Image of AC5MDZ Image of AC5MDZ
    Amphenol AC “Z” Series XLR 5 Pole Male in D Size Chassis Mount

    - D size housing can be front or rear mounted using the same panel cutout.
    - Stamped contacts
    - Silver Plating
    - Solder Bucket

    Compatible with all other XLR brands
    Material: Zinc Die-cast
    Part No.FinishDescriptionWeight
    COAC5MDZ
    COAC5MDZB
    Nickel
    Black
    XLR 5 Pole Male Chassis33g/0.073lb
    Penn Elcom Logo