NAC3MPXXA-WOT NEW!

Full Page View

PowerCON Mains Input 3 Pin 20A Chassis This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1. Appliance inlet connector, 3/16" flat tab terminals, blue, without insulation divider. The powerCON XX is a locking mains connector. It replaces appliance couplers wherever a very reliable solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON XX is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live. Features & Benefits - Lockable single phase connector - Certified according to IEC 60320-1 & UL 60320-1 - 3 contacts for line, neutral and premating safety ground - Certified according to UL-1977 & CAN/CSA-C22.2 No. 182.3 - Fast and easy twist lock latching system Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating - Extremely robust and reliable - IEC 62368-1 compliant - UL94 V-0 materials

Part No.	Finish	Description	Connector	Termination	Pole	Weight
CONAC3MPXXAWOT	Blue	Chassis connector - Power-in	Flat Tab Terminals	Flat Tab Terminals	3	40g/0.088lb

AIR-TRUSS NEW!

Full Page View

Truss braces used to strengthen larger builds with angled 90° walls. Ideal as support against structural movement due to collision by the public. Material: Aluminium

R2292 Touring Grade Heavy Duty Rack Drawers NEW!

Full Page View

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Material: Steel

285mm / 10" Deep

385mm / 14" Deep

485mm / 18" Deep

R2293 Touring Grade Heavy Duty Rack Drawers

Full Page View

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Internal Width: 409mm / 16.1" Internal Depth: 362mm / 14.25" Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latche available 3232-SLAM-LOCK Material: Steel

285mm / 10" Deep

385mm / 14" Deep

Part No.	Finish	Size (U)	Internal Dimensions (W x D x H)	Recommended Load Capacity	Weight
R2293/2UK	Black	2U	409mm x 375mm x 74mm / 16.1" x 14.76" x 2.91"	22kg/48.5lb	5.92kg/13.05lb
R2293/3UK	Black	3U	409mm x 375mm x 119mm / 16.1" x 14.76" x 4.69"	26kg/57.32lb	6.99kg/15.41lb
R2293/4UK	Black	4U	409mm x 375mm x 163mm / 16.1" x 14.76" x 6.42"	35kg/77.16lb	8.05kg/17.75lb
R2293/5UK	Black	5U	409mm x 375mm x 208mm / 16.1" x 14.76" x 8.19"	36kg/79.37lb	9.13kg/20.13lb
R2293/6UK	Black	6U	409mm x 375mm x 252mm / 16.1" x 14.76" x 9.92"	38kg/83.78lb	10.19kg/22.47lb
R2293/7UK	Black	7U	409mm x 375mm x 297mm / 16.1" x 14.76" x 11.69"	38kg/83.78lb	11.22kg/24.74lb
R2293/8UK	Black	8U	409mm x 375mm x 341mm / 16.1" x 14.76" x 13.43"	38kg/83.78lb	12.34kg/27.21lb

485mm / 18" Deep

H7148-CUP - Lid Hang NEW!

Full Page View

This two-piece dish kit is a clever solution for outfitting cases with convenient and unobtrusive hooks to hang a removable lid on when not on the case. This solves the problem of needing to stack many lids in a separate location as well as eliminating the possibility of mixing lids with cases. The H7148-CUP-M and H7148-CUP-F may also be used to couple cases together in a train formation. The hook and hang system lets you train many cases together to roll as one when transporting them across locations. How to use: The lid-fitted H7148-CUP-M is a swing-out handle dish that has a near-flush profile when not in use. The lid can be removed by pulling the handle out, lifting the lid off and then hanging it on the panel-fitted H7148-CUP-F hook dish. Smaller cases may use just one centrally-fitted kit while larger cases can utilise two kits for a double hook. Material: Steel

Part No.	Finish	Description	Weight
H7148-CUP-F 3D CAD	PennBrite™	Female Lid Hang	0.19kg/0.43lb
H7148-CUP-M 3D CAD	PennBrite™	Male Lid Hang	0.27kg/0.59lb

D053010CMZ - Cable Feedthrough Dish NEW!

Full Page View

Rubber Cable Feedthrough Dish Use the plain dish in a case panel or the offset dish over extrusion to create a convenient cable feedthrough aperture. You can pass cabling that is stored inside the case coiled or on a spool through the rubber moulded flaps to hold it in place and prevent it from retreating back inside the case. With this dish, there’s no longer a need to take the cabling out or open the lid to unwind. Simply make the incisions you need along the pre-scored indentations to create one or several openings. Can be used as a single dish or as opposing pairs to create a larger space that can be reached into. Material: Steel/Rubber

Part No.	Finish	Description
D053010CMZ 3D CAD	Zinc	Half Dish
D053710CMZ 3D CAD	Zinc	Half Dish with Offset

D0650 - Lid Dish for Rubber Feet NEW!

Full Page View

These steel lid dishes allow you to stack cases with rubber feet, providing a more secure and stable method than before. Compatible with all our rubber feet (does not work with 9106).

Part No.	Finish	Description
D0650 3D CAD	PennBrite™	Lid Dish for Rubber Feet

R2120 NEW!

Full Page View

Rack box with removable back panel, 3mm / 1/8" Aluminium Front Panel, and Vented Top. Black with choice of Brushed Black Anodised or Brushed Silver Anodised Front Panel. Material: 1.2mm / 18 gauge Steel

Part No.	Size	Front Panel	Depth (D)
R2120/1UK	1U	Brushed Black Anodised	220mm / 8.66"
R2120/1US	1U	Brushed Silver Anodised	220mm / 8.66"

R2SP82 Slimline 4-Way Speaker Splitter Box NEW!

Full Page View

Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths and less derigging time. Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options. In: 1x NL8 Out: 4x NL4 NL8MP input running from + 1- 1 ,2,3 & 4 wired to each NL4 on pins +1-1

Part No.	Finish	Description
R2SP82	Black	Speaker Splitter NL8MP NL2 x 4 NEW!

R2SP842 Slimline 6-Way Speaker Splitter Box NEW!

Full Page View

Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. This model offers two extra NL4 outputs for speakers on 4core to break out in the box. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths and less derigging time. Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options. In: 1x NL8 Out: 2x NL4, 4x NL4 NL8MP input running from + - 1 ,2,3 & 4 wired to, two NL4’s on pins +- 1 & 2 going to the 4x NL4’s on pin +- 1

Part No.	Finish	Description
R2SP842	Black	Slimline 6-Way Speaker Splitter Box NEW!

2017MP - NEW!

Full Page View

Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included) The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood. Works with large twist latches 7536, 7538 and 7568.

AIR-TOP-STR NEW!

Full Page View

Straight piece for AIR-AMP-CUBE Topper It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of hugely reducing sound egress, instruments played through the isolated amplifier can be recorded with a 40db exterior signal transmission loss. Able to be constructed in minutes and packed away for storage, the modular system makes the Cube perfect for studios and live rooms alike.

Special Order Outside the USA

Part No.	Description
AIR-TOP-STR	Straight piece for AIR-AMP-CUBE Topper

AIR-TOP-COR NEW!

Full Page View

Corner piece for AIR-AMP-CUBE Topper It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of hugely reducing sound egress, instruments played through the isolated amplifier can be recorded with a 40db exterior signal transmission loss. Able to be constructed in minutes and packed away for storage, the modular system makes the Cube perfect for studios and live rooms alike.

Special Order Outside the USA

Part No.	Description
AIR-TOP-COR	Straight piece for AIR-AMP-CUBE Topper

AIR-ROOM NEW!

Full Page View

Sound isolation has become a breeze thanks to the clever air-filled AirHushpanels –fair lighter than traditional solid options. These modular, constructible booths are easily transportable and take acoustic management to the next level with incredible performance.

Special Order Outside the USA

Part No.	Description
AIR-ROOM-39	AIR-ROOM made out of 39 Panels
AIR-ROOM-45	AIR-ROOM made out of 45 Panels

AIR-BRK2-PKG NEW!

Full Page View

2 Way Bracket with 2 Holes (Package) Used to fasten 2 panels together. 2 holes for a faster install. Package includes: - 1 x 2 Way Bracket with 2 Holes - 2 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK4-PKG NEW!

Full Page View

2 Way Bracket with 4 Holes (Package) Used to fasten 2 panels together. 4 holes for a stronger install. Package includes: - 1 x 2 Way Bracket with 4 Holes - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK6-PKG NEW!

Full Page View

4 Way Bracket with 4 Holes (Package) Used to fasten 4 panels together. 4 holes for a faster install. Package includes: - 1 x 4 Way Bracket with 4 Holes - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK8-PKG NEW!

Full Page View

4 Way Bracket with 8 Holes (Package) Used to fasten 4 panels together. 8 holes for a stronger install. Package includes: - 1 x 2 Way Bracket with 8 Holes - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK10-PKG NEW!

Full Page View

Inside 4 Way Bracket with 6 Holes (Package) Used to fasten 4 panels together at a 90 degree angle. Package includes: - 1 x Inside 4 Way Bracket with 6 Holes - 4 x M5 Counter Sink Allan Head Screws - 2 x M4 Counter Sink Allan Head Screws - 2 x M4 T-Slot

Special Order Outside the USA

AIR-BRK12-PKG NEW!

Full Page View

Inside 2 Way Bracket Left to Right with 3 Holes (Package) Used to fasten 2 panels together at a 90 degree angle. Package includes: - 1 x Inside 2 Way Bracket Left to Right with 3 Holes - 2 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK14-PKG NEW!

Full Page View

Inside 2 Way Bracket Right to Left with 3 Holes (Package) Used to fasten 2 panels together at a 90 degree angle. Package includes: - 1 x Inside 2 Way Bracket Right to Left with 3 Holes - 2 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK16-PKG NEW!

Full Page View

Outside 4 Way Bracket with 10 Holes (Package) Used to fasten 4 panels together at a 90 degrees angle. Package includes: - 1 x Outside 4 Way Bracket with 10 Holes - 8 x M5 Counter Sink Allan Head Screws - 2 x M4 Counter Sink Allan Head Screws - 2 x M4 T-Slot

Special Order Outside the USA

AIR-BRK18-PKG NEW!

Full Page View

Outside 2 Way Bracket Right to Left with 5 Holes (Package) Used to fasten 2 panels together at a 90 degrees angle. Package includes: - 1 x Outside 2 Way Bracket Right to Left with 5 Holes - 4 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK20-PKG NEW!

Full Page View

Outside 2 Way Bracket Left to Right with 5 Holes (Package) Used to fasten 2 panels together at a 90 degrees angle. Package includes: - 1 x Outside 2 Way Bracket Left to Right with 5 Holes - 4 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

Part No.	Description
AIR-BRK20-PKG	Outside 2 Way Bracket Left to Right with 5 Holes (Package)

AIR-BRK22-PKG NEW!

Full Page View

Double Anti-Flex Bracket with 8 Holes (Package) Package includes: - 1 x Double Anti-Flex Bracket with 8 Holes - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

Part No.	Description
AIR-BRK22-PKG	Double Anti-Flex Bracket with 8 Holes (Package)

AIR-BRK24-PKG NEW!

Full Page View

Anti-Flex Bracket with 4 Hole (Package) Package includes: - 1 x Anti-Flex Bracket with 4 Holes - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

Part No.	Description
AIR-BRK24-PKG	Anti-Flex Bracket with 4 Holes (Package)

AIR-BRK28-PKG NEW!

Full Page View

Inside 2 Way Bracket with 4 Holes for AIR-ISO-120 (Package) Used to fasten 2 panels together at a 120 degrees angle. Package includes: - 1 x Inside 2 Way Bracket with 4 Holes for AIR-ISO-120 - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

Part No.	Description
AIR-BRK28-PKG	Inside 2 Way Bracket with 4 Holes for AIR-ISO-120 (Package)

AIR-BRK30-PKG NEW!

Full Page View

Inside 4 Way Bracket with 8 Holes for AIR-ISO-120 (Package) Used to fasten 4 panels together at a 120 degrees angle. Package includes: - 1 x Inside 4 Way Bracket with 8 Holes for AIR-ISO-120 - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

Part No.	Description
AIR-BRK30-PKG	Inside 4 Way Bracket with 8 Holes for AIR-ISO-120 (Package)

AIR-BRK32-PKG NEW!

Full Page View

Outside 4 Way Bracket with 8 Holes for AIR-ISO-120 (Package) Used to fasten 4 panels together at a 120 degrees angle. Package includes: - 1 x Outside 4 Way Bracket with 8 Holes for AIR-ISO-120 - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

Part No.	Description
AIR-BRK32-PKG	Outside 4 Way Bracket with 8 Holes for AIR-ISO-120 (Package)

AIR-BRK34-PKG NEW!

Full Page View

Outside 2 Way Bracket with 4 Holes for AIR-ISO-120 (Package) Used to fasten 2 panels together at a 120 degrees angle. Package includes: - 1 x Outside 2 Way Bracket with 4 Holes for AIR-ISO-120 - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

Part No.	Description
AIR-BRK34-PKG	Outside 2 Way Bracket with 4 Holes for AIR-ISO-120 (Package)