NAC3MPXXA-WOT NEW!

Full Page View

PowerCON Mains Input 3 Pin 20A Chassis This connector is fully compliant to the device standard IEC 62368-1, due to its component certification according to IEC 60320-1. Appliance inlet connector, 3/16" flat tab terminals, blue, without insulation divider. The powerCON XX is a locking mains connector. It replaces appliance couplers wherever a very reliable solution in combination with a locking device is needed in order to guarantee a safe power connection. The powerCON XX is a connector with breaking capacity (CBC), i.e. it can be connected or disconnected under load or live. Features & Benefits - Lockable single phase connector - Certified according to IEC 60320-1 & UL 60320-1 - 3 contacts for line, neutral and premating safety ground - Certified according to UL-1977 & CAN/CSA-C22.2 No. 182.3 - Fast and easy twist lock latching system Power-in (blue) and power-out (grey) versions with different keying to avoid the possibility of intermating - Extremely robust and reliable - IEC 62368-1 compliant - UL94 V-0 materials

AIR-TRUSS NEW!

Full Page View

Truss braces used to strengthen larger builds with angled 90° walls. Ideal as support against structural movement due to collision by the public. Material: Aluminium

R2292 Touring Grade Heavy Duty Rack Drawers NEW!

Full Page View

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock and integrated Front Pull Handle. Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latch available R1292-SLAM Material: Steel

285mm / 10" Deep

385mm / 14" Deep

485mm / 18" Deep

R2293 Touring Grade Heavy Duty Rack Drawers

Full Page View

Touring Grade Heavy Duty Rack Drawer with Slam Lock and Key Lock Reinforced Rack Mounting Ears. Knock-Outs for Cable Access at the Rear. Internal Width: 409mm / 16.1" Internal Depth: 362mm / 14.25" Rear Support Brackets R2292-RSB-KIT Included. Replacement Slam Latche available 3232-SLAM-LOCK Material: Steel

285mm / 10" Deep

385mm / 14" Deep

485mm / 18" Deep

H7148-CUP - Lid Hang NEW!

Full Page View

This two-piece dish kit is a clever solution for outfitting cases with convenient and unobtrusive hooks to hang a removable lid on when not on the case. This solves the problem of needing to stack many lids in a separate location as well as eliminating the possibility of mixing lids with cases. The H7148-CUP-M and H7148-CUP-F may also be used to couple cases together in a train formation. The hook and hang system lets you train many cases together to roll as one when transporting them across locations. How to use: The lid-fitted H7148-CUP-M is a swing-out handle dish that has a near-flush profile when not in use. The lid can be removed by pulling the handle out, lifting the lid off and then hanging it on the panel-fitted H7148-CUP-F hook dish. Smaller cases may use just one centrally-fitted kit while larger cases can utilise two kits for a double hook. Material: Steel

D0650 - Lid Dish for Rubber Feet NEW!

Full Page View

These steel lid dishes allow you to stack cases with rubber feet, providing a more secure and stable method than before. Compatible with all our rubber feet (does not work with 9106).

R2120 NEW!

Full Page View

Rack box with removable back panel, 3mm / 1/8" Aluminium Front Panel, and Vented Top. Black with choice of Brushed Black Anodised or Brushed Silver Anodised Front Panel. Material: 1.2mm / 18 gauge Steel

R2SP82 Slimline 4-Way Speaker Splitter Box NEW!

Full Page View

Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths and less derigging time. Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options. In: 1x NL8 Out: 4x NL4 NL8MP input running from + 1- 1 ,2,3 & 4 wired to each NL4 on pins +1-1

R2SP842 Slimline 6-Way Speaker Splitter Box NEW!

Full Page View

Made with high-grade steel, this slim profile drop box is ideal for running a single NL8 cable from the amplifier rack to your speaker stack. This model offers two extra NL4 outputs for speakers on 4core to break out in the box. Enables the use of short link leads from the box to speakers for improved cable management, shorter lengths and less derigging time. Can be used as a single box per stack or multiple boxes chained for larger stacks or custom wired for many pin or pin swap options. In: 1x NL8 Out: 2x NL4, 4x NL4 NL8MP input running from + - 1 ,2,3 & 4 wired to, two NL4’s on pins +- 1 & 2 going to the 4x NL4’s on pin +- 1

2017MP - NEW!

Full Page View

Multi-position surface mount twist latch protector plate with protective ridges. (Latch not included) The multiple mounting hole patterns enable the latch to operate with catch plates when used with 3/8", 1/2" or 3/4" plywood. Works with large twist latches 7536, 7538 and 7568.

AIR-TOP-STR NEW!

Full Page View

Straight piece for AIR-AMP-CUBE Topper It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of hugely reducing sound egress, instruments played through the isolated amplifier can be recorded with a 40db exterior signal transmission loss. Able to be constructed in minutes and packed away for storage, the modular system makes the Cube perfect for studios and live rooms alike.

Special Order Outside the USA

AIR-TOP-COR NEW!

Full Page View

Corner piece for AIR-AMP-CUBE Topper It takes some revolutionary tech to outperform traditional sound isolation boxes and with the modular and lightweight AirHush panels, the Cube has to be seen (and not heard) to be believed. Capable of hugely reducing sound egress, instruments played through the isolated amplifier can be recorded with a 40db exterior signal transmission loss. Able to be constructed in minutes and packed away for storage, the modular system makes the Cube perfect for studios and live rooms alike.

Special Order Outside the USA

AIR-ROOM NEW!

Full Page View

Sound isolation has become a breeze thanks to the clever air-filled AirHushpanels –fair lighter than traditional solid options. These modular, constructible booths are easily transportable and take acoustic management to the next level with incredible performance.

Special Order Outside the USA

AIR-BRK2-PKG NEW!

Full Page View

2 Way Bracket with 2 Holes (Package) Used to fasten 2 panels together. 2 holes for a faster install. Package includes: - 1 x 2 Way Bracket with 2 Holes - 2 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK4-PKG NEW!

Full Page View

2 Way Bracket with 4 Holes (Package) Used to fasten 2 panels together. 4 holes for a stronger install. Package includes: - 1 x 2 Way Bracket with 4 Holes - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK6-PKG NEW!

Full Page View

4 Way Bracket with 4 Holes (Package) Used to fasten 4 panels together. 4 holes for a faster install. Package includes: - 1 x 4 Way Bracket with 4 Holes - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK8-PKG NEW!

Full Page View

4 Way Bracket with 8 Holes (Package) Used to fasten 4 panels together. 8 holes for a stronger install. Package includes: - 1 x 2 Way Bracket with 8 Holes - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK10-PKG NEW!

Full Page View

Inside 4 Way Bracket with 6 Holes (Package) Used to fasten 4 panels together at a 90 degree angle. Package includes: - 1 x Inside 4 Way Bracket with 6 Holes - 4 x M5 Counter Sink Allan Head Screws - 2 x M4 Counter Sink Allan Head Screws - 2 x M4 T-Slot

Special Order Outside the USA

AIR-BRK12-PKG NEW!

Full Page View

Inside 2 Way Bracket Left to Right with 3 Holes (Package) Used to fasten 2 panels together at a 90 degree angle. Package includes: - 1 x Inside 2 Way Bracket Left to Right with 3 Holes - 2 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK14-PKG NEW!

Full Page View

Inside 2 Way Bracket Right to Left with 3 Holes (Package) Used to fasten 2 panels together at a 90 degree angle. Package includes: - 1 x Inside 2 Way Bracket Right to Left with 3 Holes - 2 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK16-PKG NEW!

Full Page View

Outside 4 Way Bracket with 10 Holes (Package) Used to fasten 4 panels together at a 90 degrees angle. Package includes: - 1 x Outside 4 Way Bracket with 10 Holes - 8 x M5 Counter Sink Allan Head Screws - 2 x M4 Counter Sink Allan Head Screws - 2 x M4 T-Slot

Special Order Outside the USA

AIR-BRK18-PKG NEW!

Full Page View

Outside 2 Way Bracket Right to Left with 5 Holes (Package) Used to fasten 2 panels together at a 90 degrees angle. Package includes: - 1 x Outside 2 Way Bracket Right to Left with 5 Holes - 4 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK20-PKG NEW!

Full Page View

Outside 2 Way Bracket Left to Right with 5 Holes (Package) Used to fasten 2 panels together at a 90 degrees angle. Package includes: - 1 x Outside 2 Way Bracket Left to Right with 5 Holes - 4 x M5 Counter Sink Allan Head Screws - 1 x M4 Counter Sink Allan Head Screws - 1 x M4 T-Slot

Special Order Outside the USA

AIR-BRK22-PKG NEW!

Full Page View

Double Anti-Flex Bracket with 8 Holes (Package) Package includes: - 1 x Double Anti-Flex Bracket with 8 Holes - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK24-PKG NEW!

Full Page View

Anti-Flex Bracket with 4 Hole (Package) Package includes: - 1 x Anti-Flex Bracket with 4 Holes - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK28-PKG NEW!

Full Page View

Inside 2 Way Bracket with 4 Holes for AIR-ISO-120 (Package) Used to fasten 2 panels together at a 120 degrees angle. Package includes: - 1 x Inside 2 Way Bracket with 4 Holes for AIR-ISO-120 - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK30-PKG NEW!

Full Page View

Inside 4 Way Bracket with 8 Holes for AIR-ISO-120 (Package) Used to fasten 4 panels together at a 120 degrees angle. Package includes: - 1 x Inside 4 Way Bracket with 8 Holes for AIR-ISO-120 - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK32-PKG NEW!

Full Page View

Outside 4 Way Bracket with 8 Holes for AIR-ISO-120 (Package) Used to fasten 4 panels together at a 120 degrees angle. Package includes: - 1 x Outside 4 Way Bracket with 8 Holes for AIR-ISO-120 - 8 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-BRK34-PKG NEW!

Full Page View

Outside 2 Way Bracket with 4 Holes for AIR-ISO-120 (Package) Used to fasten 2 panels together at a 120 degrees angle. Package includes: - 1 x Outside 2 Way Bracket with 4 Holes for AIR-ISO-120 - 4 x M5 Counter Sink Allan Head Screws

Special Order Outside the USA

AIR-GOBO-6 NEW!

Full Page View

3 by 2 AirHush GoBo Package includes: - 6 x AirHush Panels AIR-2427PANEL - 2 x AirHush GoBo End Wheel Set AIR-GOBO-END - All the necessary mounting hardware (4 X AIR-BRK6-PKG, 4 X AIR-BRK22-PKG, 2 X AIR-BRK24-PKG) Ground Clearance: 0.9" Be prepared to forget your expectations of what rolling acoustic walls can do –the AirHushGoBois lighter, more eco-friendly and seriously quiet. The lightweight AirHushpanels allow these highly manoeuvrable wheeled acoustic walls to be used anywhere on-the-go sound management is required. From film locations, schools, studios, offices and events, there’s nowhere the AirHush GoBo can’t go. Assembly instructions

Special Order Outside the USA