DALI-2 Pushbutton coupler with 4 inputs 86459532-2-INT

DALI-2 Pushbutton coupler with 4 inputs to connect standard potential-free switches or pushbuttons

Each input can be individually configured with target address, button behaviour and DALI commands. Besides the standard functions, dimming, switching, scene recall, etc., predefined macros such as setting the colour temperature, dynamic scenes and sequences as well as user defined command lists are supported. The device is designed to fit behind a switch in a flush-type installation box.

Product features:
Designed and made in the EU
Compact housing for back box installation
Instances activated version

Product family overview:
Compact DALI-2 control module with 4 potential-free inputs
Multi-master capable: Several modules can be installed within a DALI circuit
Different DALI commands can be assigned to each input
Integrated DALI-2 application controller
Four DALI-2 pushbutton instances are available for an easy integration
In addition to the standard DALI commands, the application controller also supports DALI DT8 TC and RGB(W) control
short button press, long button press (with repetition for dimming) and «toggle» are supported
Suitable for push-buttons, as well as switches
With the application controller Sequences, macros and other functions can be realized
Easy configuration via Lunatone DALI USB interface and DALI-Cockpit Software Tool
Easy installation: the device can be installed in a flush-mounted installation box and is supplied via the DALI bus
DALI-2 control unit according to IEC62386-103

Article number: 86459532-2-INT (Back box version)
GTIN: 9010342013492

DALI interface, power supply:
Output type: DALI, DALI-2, Multimaster
Terminal markings: DA, DA
Voltage range: 9,5V-22,5Vdc according to IEC62386
Typical current consumption DALI (16,5V): 3.3 mA
Typical current consumption DALI (22,5V): 3.6 mA
DALI addresses: none
DALI-2 addresses: 1

Input:
Inputs for: Potential free button/switch
Number of inputs: 4
Marking input terminals: T1, T2, T3, T4, COM
minimum length of control pulse: 40ms
Control pulse length for long press configurable: 200-5100ms
Max wire length pushbutton input: 5m

Insulation data:
Impulse voltage: category II
Pollution degree: 2
Rated insulation voltage: 250V
Insulation DALI / mains: reinforced isolation
Insulation test voltage DALI / mains: 3000Vac

Environmental conditions:
Storing and transportation temperature: -20°C +75°C
Operational ambient temperature: -20°C +75°C
Rel. humidity, not condensing: 15% - 90%

General data:
Dimensions (l x w x h): 41mm x 28mm x 15mm (details below)
Mounting back box installation, installation in protection class II devices
Rated maximum temperature tc: 75°C
Expected life time: 200.000h
Protection class: SKII (when used/installed as intended)
Protection degree housing: IP40
Protection degree terminals: IP20

Terminals:
Connection type: spring terminal connectors
Wire size: solid core: 0,5 - 1,5 mm2 (AWG20 - AWG16)
Wire size: fine wired: 0,5 - 1,5 mm2 (AWG20 - AWG16)
Wire size: using wire end ferrule: 0,25 - 1 mm2
Stripping length: 8,5 - 9,5 mm / 0,33 - 0,37 inch
Tightening/ release of wire: push mechanism

Standards:
DALI: IEC62386-101:2014, IEC62386-103:2014
EMV: EN 61547, EN 50015 / IEC CISPR15
Safety: EN 61347-2-11, EN 61347-1
Markings: DALI-2, CE