Led Driver Oti Dali 35/220-240/700 Lt2 L G2 4052899551763
Osram
Part No
LEDOTIDALI35700G2
£30.83
£25.69
In stock
OTi DALI 35/220-240/700 LT2 L G2
OPTOTRONIC Intelligent - Dimmable DALI Constant Current
Product family benefits:
Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W *
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application:
Linear lighting for office, education, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I
Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance
EAN: 4052899551763
Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Current set: DALI / LEDset / Programmable
Total harmonic distortion: < 15 %
Power factor: > 0.95
ECG efficiency: up to 90 %
Device power loss: 4.0 W
Power loss in stand-by mode: <0.15 W
Protective conductor current: <0.5 mA
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 24
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 15-54 V
U-OUT (working voltage): < 60 V
Nominal output current: 200-700 mA
Output current LEDset open: 100 mA
Output current LEDset shorted: 700 mA
Default output current: 100 mA
Output current tolerance: +/- 3 %
Output ripple current (100 Hz): < 1 %
Output PSTLM: <= 1
Output SVM: <= 0.4
Nominal output power: 4-37 W
Galvanic isolation: SELV
Dimensions & weight
Mounting hole spacing, length: 350.0 mm
Product weight: 240.00 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.0-9.0 mm
Wire preparation length, output side: 8.0-9.0 mm
Height: 21.0 mm
Width: 30.0 mm
Length: 360.0 mm
Colors & materials
Casing material: Metal
Temperatures & operating conditions
Ambient temperature range: -25 +50 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
Lifespan
ECG lifetime: 50000 / 100000 h
Capabilities
Programming interface: DALI, LEDset
Dimmable: Yes
Dimming interface: DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method
Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Non-reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Number of channels: 1
Control interface: DALI
Programming
ProgrammingTuner4TRONIC Field App: Yes
Programming device: DALI magic
Constant Lumen: Yes
Certificates & standards
Approval marks – approval: CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / RCM / BIS
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection: IP20
Commodity code: 850440829000
OPTOTRONIC Intelligent - Dimmable DALI Constant Current
Product family benefits:
Fully programmable via software (DALI Interface)
Flexible current setting (LEDset2)
Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate)
High-quality dimming of 1…100 % by amplitude dimming (except 80 W versions)
High quality of light thanks to <1% output ripple current
Very high efficiency
Very low standby power consumption: < 0.15 W *
Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of application:
Linear lighting for office, education, storage areas and retail
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for luminaires of protection class I
Versatile scope of application due to OSRAM DALI Technology:
Easy to use in corridors and restrooms because of three-level Corridor function
Touch DIM application: easy to control via pushbutton or sensor
Energy efficient Touch DIM operation due to automatic switch-off at sufficient residual light
Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13, appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
Feedback of power consumption and operating hours (Fit for SMART GRID)
Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Luminaire information for easy maintenance
EAN: 4052899551763
Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Current set: DALI / LEDset / Programmable
Total harmonic distortion: < 15 %
Power factor: > 0.95
ECG efficiency: up to 90 %
Device power loss: 4.0 W
Power loss in stand-by mode: <0.15 W
Protective conductor current: <0.5 mA
Inrush current: 20 A
Max. ECG no. on circuit breaker 10 A (B): 15
Max. ECG no. on circuit breaker 16 A (B): 24
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 15-54 V
U-OUT (working voltage): < 60 V
Nominal output current: 200-700 mA
Output current LEDset open: 100 mA
Output current LEDset shorted: 700 mA
Default output current: 100 mA
Output current tolerance: +/- 3 %
Output ripple current (100 Hz): < 1 %
Output PSTLM: <= 1
Output SVM: <= 0.4
Nominal output power: 4-37 W
Galvanic isolation: SELV
Dimensions & weight
Mounting hole spacing, length: 350.0 mm
Product weight: 240.00 g
Cable cross-section, input side: 0.5-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 8.0-9.0 mm
Wire preparation length, output side: 8.0-9.0 mm
Height: 21.0 mm
Width: 30.0 mm
Length: 360.0 mm
Colors & materials
Casing material: Metal
Temperatures & operating conditions
Ambient temperature range: -25 +50 C
Maximum temperature at tc test point: 75 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
Lifespan
ECG lifetime: 50000 / 100000 h
Capabilities
Programming interface: DALI, LEDset
Dimmable: Yes
Dimming interface: DALI-2 / Touch DIM / Touch DIM Sensor
Dimming range: 1-100 %
Dimming method
Amplitude Modulation
Constant lumen function: Programmable
Overheating protection: Automatic reversible
Overload protection: Non-reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Number of channels: 1
Control interface: DALI
Programming
ProgrammingTuner4TRONIC Field App: Yes
Programming device: DALI magic
Constant Lumen: Yes
Certificates & standards
Approval marks – approval: CE / EL / VDE-ENEC / VDE-EMC / EAC / CCC / RCM / BIS
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386
Type of protection: IP20
Commodity code: 850440829000
| Type of LED Driver | Constant Current |
|---|---|
| Type of Control/Dimming | Dali |
| Weight | 260g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify