Led Driver Ot 20/220-240/24 Dim P 24v 20w 4052899545809

Part No
LEDOT2024DIMP
£28.72 £23.93
In stock
CV Power supplies 24 V with 1-10 V Product benefits Large range of products from 20 W to 250 W Installation in very cold and hot environments Very stable output power High electronical reversible short-circuit, overload, overtemperature protection Smart Power Supply boosting power to turn on cold LEDs Independent installation possible Dimming range 1-100 % Product features DC mode functionality Type of protection IP66 and IP67 Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE) Wide operating temperature range -30 +55 C Lifetime up to 50000 h (temperature at max. tc) Dimmable via fully isolated 1-10 V interface Areas of application Facades, public squares, cruise ships Signage Suitable for indoor and outdoor installations EAN: 4052899545809 Nominal voltage: 220-240 V Mains frequency: 0-60 Hz Input voltage AC: 198-264 V Total harmonic distortion: < 15 % Power factor: 0.95 ECG efficiency: 83 % Device power loss: 3.4 W Power loss in stand-by mode: <0.5 W Inrush current: 20 A Max. ECG no. on circuit breaker 10 A (B): 48 Max. ECG no. on circuit breaker 16 A (B): 77 Max. ECG no. on circuit breaker 25 A (B): 120 Surge capability (L-N): 4 kV Nominal output voltage: 24.2 V U-OUT (working voltage): 30 V Nominal output power: 20 W Galvanic isolation: SELV Galvanic isolation primary/secondary: 3 kV Length: 178 mm Width: 43 mm Height: 25 mm Mounting hole spacing, length: 169 mm Product weight: 315 g Cable cross-section, input side: 1.0 sqmm Cable cross-section, output side: 1.0 sqmm Wire preparation length, input side: 90 mm Wire preparation length, output side: 90 mm Cable/wire length, control input: 320 mm Cable/wire length, input side: 300 mm Cable/wire length, output side: 300 mm Casing material: Plastic Ambient temperature range: -30 +55 C Maximum temperature at tc test point: 85 C Max.housing temperature in case of fault: 110 C Permitted rel. humidity during operation: 5-85 % Ambient temperature range: -30 +55 C Maximum temperature at tc test point: 85 C Max.housing temperature in case of fault: 110 C Permitted rel. humidity during operation: 5-85 % ECG lifetime: 50000 h Encapsulated: Yes Dimmable: Yes Dimming interface: 1-10 V Dimming range: 1-100 % Dimming method: Pulse Width Modulation Overheating protection: Yes Overload protection: Yes Short-circuit protection: Yes No-load proof: Yes Suitable for fixtures with prot. class: II Type of connection, output side: Cables Number of channels: 1 Approval marksl: ENEC/RCM/CCC/EAC Standards Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384 Protection class: II Type of protection: IP66 Temperature range at storage: -40 +85 C
Technical Information
Weight 410g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver Ot 20/220-240/24 Dim P 24v 20w 4052899545809
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify