Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable 4062172237642
Osram
Part No
LEDOTFIT15024PC
Osram Led Driver Ot Fit 150 /220-240/24 Pc Mains Dimmable for 24V LED strips
EAN: 4062172237642
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting, to be ordered separately.
Product family benefits:
IP rating: IP20
High efficiency
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible
Areas of application:
Suitable for luminaires of protection classes I and II
Hospitality – decorative lighting, night light
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, under cabinet lighting
Technical spec:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 15 %
Power factor λ: > 0.95
Efficiency in full-load: 92 %
Device power loss: 13 W
Inrush current: < 60 A
Max. ECG no. on circuit breaker 10 A (C): 3
Max. ECG no. on circuit breaker 10 A (B): 2
Max. ECG no. on circuit breaker 16 A (B): 4
Max. ECG no. on circuit breaker 16 A (C): 6
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V
Nominal output power: 60.5...151.3 W
Maximum output power: 151.3 W
Galvanic isolation: SELV
Output PWM frequency: 3k Hz
Dimensions & weight:
Mounting hole spacing, length: 159.5 mm
Product weight: 580.00 g
Cable cross-section, input side: 0.75…1.5 mm²
Cable cross-section, output side: 0.75…1.5 mm²
Wire preparation length, input side: 7…8 mm
Wire preparation length, output side: 7…8 mm
Mounting hole spacing, width: 66 mm
Length: 170.0 mm
Height: 30.0 mm
Width: 76.0 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -20…80 °C
Permitted rel. humidity during operation: 5…85 %
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut
Dimming range: 3…100 %
Dimming method: PWM
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection:
Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, input side: Fixed connection (terminal)
Type of connection, output side: Fixed connection (terminal)
Number of channels: 1
Control interface: Trailing edge dimmer recommended
Programming:
Tuner4TRONIC: No
Certificates & standards:
Approval marks – approval: CE / ENEC / CCC / RCM / UKCA / EAC / SELV / CB
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 60598-1/Acc. to EN 62384/CISPR 15/EN 55015
Protection class: II
Type of protection: IP20
EAN: 4062172237642
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting, to be ordered separately.
Product family benefits:
IP rating: IP20
High efficiency
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible
Areas of application:
Suitable for luminaires of protection classes I and II
Hospitality – decorative lighting, night light
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, under cabinet lighting
Technical spec:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 15 %
Power factor λ: > 0.95
Efficiency in full-load: 92 %
Device power loss: 13 W
Inrush current: < 60 A
Max. ECG no. on circuit breaker 10 A (C): 3
Max. ECG no. on circuit breaker 10 A (B): 2
Max. ECG no. on circuit breaker 16 A (B): 4
Max. ECG no. on circuit breaker 16 A (C): 6
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V
Nominal output power: 60.5...151.3 W
Maximum output power: 151.3 W
Galvanic isolation: SELV
Output PWM frequency: 3k Hz
Dimensions & weight:
Mounting hole spacing, length: 159.5 mm
Product weight: 580.00 g
Cable cross-section, input side: 0.75…1.5 mm²
Cable cross-section, output side: 0.75…1.5 mm²
Wire preparation length, input side: 7…8 mm
Wire preparation length, output side: 7…8 mm
Mounting hole spacing, width: 66 mm
Length: 170.0 mm
Height: 30.0 mm
Width: 76.0 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -20…80 °C
Permitted rel. humidity during operation: 5…85 %
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut
Dimming range: 3…100 %
Dimming method: PWM
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection:
Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, input side: Fixed connection (terminal)
Type of connection, output side: Fixed connection (terminal)
Number of channels: 1
Control interface: Trailing edge dimmer recommended
Programming:
Tuner4TRONIC: No
Certificates & standards:
Approval marks – approval: CE / ENEC / CCC / RCM / UKCA / EAC / SELV / CB
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 60598-1/Acc. to EN 62384/CISPR 15/EN 55015
Protection class: II
Type of protection: IP20
重量 | 580g |
---|
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify