Led Driver Ot 130/220-240/24 Dim P 24v 130w 4052899545885

Osram OT 130/220-240/24 DIM P

Product benefits:
Large range of products from 20 W to 250 W
Installation in very cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Smart Power Supply boosting power to turn on cold LEDs
Independent installation possible
Dimming range 1-100 %

Product features:
DC mode functionality
Type of protection IP66
Surge protection: up to 4 kV (L-N) / 6 kV (L/N-PE)
Wide operating temperature range: -30 +55 C
Lifetime up to 50000 h (temperature at max. tc)
Dimmable via fully isolated 1-10 V interface

Areas of application:
Facades, public squares, cruise ships
Signage
Education
Hospitality
Backlighting
Light advertising
Museums
Monuments
AFacade illumination
Architectural
Decorative
Suitable for indoor and outdoor installations

EAN: 4052899545885
Nominal output power: 130 W
Mains frequency: 0-60 Hz
Power loss in stand-by mode: <0.5 W
Nominal voltage: 220-240 V
Galvanic isolation primary/secondary: 3 kV
Nominal output voltage: 24.2 V
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Length: 220 mm
Width: 63 mm
Height: 37 mm
Product weight: 943 g
Mounting hole spacing, length: 207 mm
Permitted rel. humidity during operation: 5-85 %
Suitable for fixtures with prot. class: I
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
No-load proof: Yes
Number of channels: 1
Dimming interface: 1-10 V
Dimmable: Yes
Type of protection: IP66
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 61000-3-3/Acc. to EN 60598-1/Acc. to EN 62384
Approval marks � approval: ENEC, RCM, CCC, EAC