Htm 105 Electronic Transformer 35-105w Dim 4050300442334

HALOTRONIC-COMPACT - HTM, HTN | Electronic transformers for low-voltage halogen lamps

Product benefits:

Dimmable on the leading edge (without HTN) and trailing edge
Very low power loss thanks to high efficacy
Strain relief suitable for different cable types (HTM)
Suitable for space-critical installation thanks to compact functional design
Extremely compact transformer for highly space-critical installation conditions (HTN)
Protective operation throughout the entire partial-load range for long lamp life

Product features:

Line frequency: 50/60 Hz
RI suppression: to EN 55015 (A1: 2007)/CISPR 15, EN 55022
Line harmonics according to EN 61000-3-2
Immunity according to EN 61547
Safety: to EN 61347
Short-circuit protection, overload protection, overtemperature protection: electronically reversible
Electrical isolation between the primary side and the secondary side
Switching between electronic transformer and lamp not permitted
Energy efficiency: >= 91 % (according to ErP regulation 2012/1194/EC)

Areas of application:

Effect and accent lighting
Living rooms
Object lighting
Conference rooms
Restaurants
Recessed and surface-mounted furniture fixtures
Shop lighting
Event rooms

EAN: 4050300442334
Lamp wattage: 35-105 W
Line current: 0.41 A
Nominal voltage: 230-240 V
Power factor λ: 0.99
Output voltage: 11.3/11.4 V
Mains frequency: 50/60 Hz
System wattage: 111.00 W
Galvanic isolation primary/secondary: 4.00 kV
Maximum no-load wattage: 0.41 W
Length: 108.0 mm
Width: 52.0 mm
Height: 33.0 mm
Cable cross-section, input side: 2.5 sqmm
Cable cross-section, output side: 2.5 sqmm
Wire preparation length, input side (cable sheath/ wire): 12 / 7.0 mm
Wire preparation length, output side (cable sheath/ wire):  12 / 7.0 mm
Product weight: 125.00 g
Ambient temperature range: 0 +45 C
Maximum temperature at tc test point: +85 C
Design/version: Compact with cable clamp
Dimmer: Trailing- or leading-edge phase control for inductive load dimmers
Overload protection: Automatic reversible
Overheating protection: Automatic reversible
Short-circuit protection: Automatic reversible
Maximum wiring length ECG/lamp: 2.0 m
Cable types, input side: NYM 3x1.5 / H05VV-F 3x0.75 / H05VV-F 3x1.0 / H05VV-F 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.0 / H05VV-F 2x1.5 / H05VVH2-F 2x0.75 / H05VVH2-F 2x1.5 sqmm
Cable types, output side: NYM 3x1.5 / H05VV-F 3x0.75 / H05VV-F 3x1.5 / H05VV-F 3x1.5 / H05VV-F 2x0.75 / H05VV-F 2x1.5 / H05VVH2-F 2x0.75 sqmm
Dimmable: Yes
Dimming range: 0-100 %
No-load proof: Yes
Suitable for fixtures with prot. class: II
Approval marks - approval: VDE / VDE-EMC / E1 approval