Warm White FREE CUT 5m/reel NANO COB (Dotless) Strip 5w 27k 24v FLSNFC1-0G1CB11
fossLED
Part No
LEDFLCOBFCN5W27K
The FossLED NANO FREE CUT SERIES Strips are designed to be concealed and light up even the tightest of spaces and be customised to precise lengths; feel free to cut anywhere along the LED Strips PCB board for a millimetre perfect finish.
Important notes: The LED strip can be cut anywhere along its length (scissor marks on the PCB to be neglected) and without getting any dark ends. However, any cutting needs to be done while power is disconnected.
Soldering pads are at the back of the PCB. Remove the top blue tape then the double adhesive white tape to expose the back of the PCB. Use our CA2F22 cable for easy of soldering.
This 5W per metre model features a width of only 4mm whilst equipped with high efficiency LEDs on a 2oz PCB board for a durable finish.
Easy mounting thanks to added strength (3M 300LSE) self adhesive and backed by a 5 year warranty!
Available service for ease installation:
Each reel comes supplied with a short 200mm cable tail soldered at one end from factory.
Need a longer tail or new feeds? Contact us on [email protected] for our soldering service. We can provide long bespoke tails to suit installation needs.
Available LED driver options (to power a full 5m reel):
Looking for a different option? Please email us on [email protected]
Cost effective non-dimmable (on/off only): Osram Element 30W LEDECV3024
High spec non-dimmable (on/off only): Osram SLIM 30W LEDOT3024
Triac (mains) dimmable: Osram OT FIT 36W LEDOTFIT3624PC
DALI2 dimmable: Osram OTi 30W 1Ch LEDOTIDALI30CH1
1-10V analogue dimmable: Osram OT 40W DIM P LEDOT4024DIMP
Bluetooth Casambi: Osram Casambi OTi BLE 50W LEDOTWI504CHCA
Wireless (RF) remote and receiver: Teucer Single Zone Pack LEDLRWN
Technical spec:
Nominal voltage: 24.0 V
Type of current: DC
Nominal wattage per meter: 5.0 W
Input voltage range: 23…25 V
Photometrical data Light color LED: White
Color rendering index Ra: >92
Luminous flux per meter: 400 lm
Luminous efficacy: 80 lm/W
Standard deviation of color matching: ≤3 sdcm
Color temperature: 2700 K
Colour Sensation: Warm White
LED module information
Number of LEDs per meter: 480
Dimensions & weight:
Length: 5000 mm
Width: 4.00 mm
Product weight/reel: 100 g
Temperatures & operating conditions
Temperature range in operation at Tc point: -25 +80 °C
Ambient temperature range: -25 +45 °C
Temperature range at storage: -40 +80 °C
Lifespan Nominal lamp life time: 50000 h
Lumen main.fact.at end of nom.life time: L80
Capabilities:
Dimmable: Yes
Lowest bending radius: 20 mm
Certificates & standards:
Standards: CE/UK-CA/RoHS
Type of protection: IP20
Logistical data:
Commodity code: 8539510000
Important notes: The LED strip can be cut anywhere along its length (scissor marks on the PCB to be neglected) and without getting any dark ends. However, any cutting needs to be done while power is disconnected.
Soldering pads are at the back of the PCB. Remove the top blue tape then the double adhesive white tape to expose the back of the PCB. Use our CA2F22 cable for easy of soldering.
This 5W per metre model features a width of only 4mm whilst equipped with high efficiency LEDs on a 2oz PCB board for a durable finish.
Easy mounting thanks to added strength (3M 300LSE) self adhesive and backed by a 5 year warranty!
Available service for ease installation:
Each reel comes supplied with a short 200mm cable tail soldered at one end from factory.
Need a longer tail or new feeds? Contact us on [email protected] for our soldering service. We can provide long bespoke tails to suit installation needs.
Available LED driver options (to power a full 5m reel):
Looking for a different option? Please email us on [email protected]
Cost effective non-dimmable (on/off only): Osram Element 30W LEDECV3024
High spec non-dimmable (on/off only): Osram SLIM 30W LEDOT3024
Triac (mains) dimmable: Osram OT FIT 36W LEDOTFIT3624PC
DALI2 dimmable: Osram OTi 30W 1Ch LEDOTIDALI30CH1
1-10V analogue dimmable: Osram OT 40W DIM P LEDOT4024DIMP
Bluetooth Casambi: Osram Casambi OTi BLE 50W LEDOTWI504CHCA
Wireless (RF) remote and receiver: Teucer Single Zone Pack LEDLRWN
Technical spec:
Nominal voltage: 24.0 V
Type of current: DC
Nominal wattage per meter: 5.0 W
Input voltage range: 23…25 V
Photometrical data Light color LED: White
Color rendering index Ra: >92
Luminous flux per meter: 400 lm
Luminous efficacy: 80 lm/W
Standard deviation of color matching: ≤3 sdcm
Color temperature: 2700 K
Colour Sensation: Warm White
LED module information
Number of LEDs per meter: 480
Dimensions & weight:
Length: 5000 mm
Width: 4.00 mm
Product weight/reel: 100 g
Temperatures & operating conditions
Temperature range in operation at Tc point: -25 +80 °C
Ambient temperature range: -25 +45 °C
Temperature range at storage: -40 +80 °C
Lifespan Nominal lamp life time: 50000 h
Lumen main.fact.at end of nom.life time: L80
Capabilities:
Dimmable: Yes
Lowest bending radius: 20 mm
Certificates & standards:
Standards: CE/UK-CA/RoHS
Type of protection: IP20
Logistical data:
Commodity code: 8539510000
LED reel/strip length | 5m / 196.9" |
---|---|
Product Type | LED strips |
LEDs per meter | 480 |
LED strip cutting point | Anywhere |
Colour Rendering Index (CRI) | >90 |
Warranty | 5 yrs |
LED Strip width | 4mm / 3/16" |
LED strip type | NANO FREE CUT COB |
Colour appearance | Warm White |
Colour temperature (CCT) | 2700K |
Input voltage | 24V |
Light output (Lumens per meter) | <500lm |
Power consumption | 5-10 W/m |
LED Protection type | IP20 |
Weight | 100g |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify