Led Driver Ot 20/220-240/24 24v 20w 4050300618111

OT 20/220-240/24V PSU 24V Small 20W LED driver

Untroubled - a reliable power source for lighting

Product family benefits:
Installation in cold and hot environments
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible

Areas of application:
Facades, public squares, cruise ships
Signage
Suitable for indoor and outdoor installations

EAN: 4050300618111

Electrical data:
Nominal input voltage: 220-240 V
Mains frequency: 50-60 Hz
Input voltage AC: 198-264 V
Input voltage DC: -
Total harmonic distortion: < 150 %
Power factor: 0.5
ECG efficiency: 83 %
Device power loss: 4.0 W
Inrush current: 17 A
Max. ECG no. on circuit breaker 10 A (B): 23
Max. ECG no. on circuit breaker 10 A (C): -
Max. ECG no. on circuit breaker 16 A (C): -
Max. ECG no. on circuit breaker 16 A (B): 42
Max. ECG no. on circuit breaker 25 A (B): -
Surge capability (L-N): 1 kV
Nominal output voltage: 24 V
U-OUT (working voltage): 24 V
Nominal output power: 20 W
Partial load: 0.5-20 W
Galvanic isolation: SELV
Galvanic isolation primary/secondary: 3 kV
Surge capability (L/N-Ground): -
Output ripple Voltage (100 Hz): -

Dimensions & weight:
Mounting hole spacing, length: -
Product weight: 108.00 g
Cable cross-section, input side: 0.75-1.5 sqmm
Cable cross-section, output side: 0.5-1.5 sqmm
Wire preparation length, input side: 10 mm
Wire preparation length, output side: 10 mm
Cable/wire length, input side: -
Cable/wire length, output side: -
Length: 109.0 mm
Height: 35.0 mm
Width: 50.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20 +50 °C
Maximum temperature at tc test point: 70 °C
Max.housing temperature in case of fault: 90 °C
Temperature range at storage: -40 +85 °C
Permitted rel. humidity during operation: 5-85 %

Lifespan:
ECG lifetime: 30000 h

Capabilities:
Dimmable: No
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: II
Type of connection, output side: Screw terminal
Number of channels: 1

Certificates & standards:
Approval marks – approval: CE / ENEC 10 / VDE / VDE-EMC / RCM
Standards: Acc. to IEC 61347-2-13/Acc. to IEC 62384/Acc. to EN 55015/Acc. to IEC 61000-3-2/Acc. to IEC 61000-3-3/Acc. to IEC 61547
Protection class: II
Type of protection: IP20

Logistical data:
Commodity code: 85044083900