Led Driver OT FIT 14/220-240/350 CS PC Phasecut dimmable 4062172286503

Osram

Part No
LEDOTFIT14350CSPC
OT FIT 14/220-240/350 CS PC

Constant Current SELV drivers with leading- or trailing-edge dimming.

The
compatibility with the most common leading-edge and trailing-edge phase
dimmers and the possibility of dimming from 5-100% marks one of the key
characteristics. Others include a cable clamp for independent
installations and DIP switsches for 4 output currents per wattage.

Orange cable clamps included with the driver. This allows independent mounting of the driver.
EAN: 4062172286503

Perfect match for the Osram PrevaLED Coins 1400 (50mm):  LEDCOB140092715D, LEDCOB140092724D, LEDCOB140092740DLEDCOB140093015DLEDCOB140093024D & LEDCOB140093040D

Product family features:
Cable clamp housing for independent mounting
Dimmable on the leading edge and trailing edge
Housing for independent installation

Product family benefits:
Compatible with the most common leading-edge and trailing-edge phase dimmers
Flexible current setting (DIPswitch – 2 to 4 currents)
Flicker-free dimming
Higher quality of light thanks to < 5% output ripple current
Housing from 80% recycled plastic

Areas of application:
Decorative illumination
Downlights, flat luminaires
Hospitality
Living areas
Museums, residential buildings
Offices
Shop lighting
Suitable for indoor SELV installations
Suitable for luminaires of protection class I and II

Electrical Data:
Nominal voltage: 220 - 240 V
Mains frequency: 50 - 60 Hz
Input voltage AC: 198 - 264 V
Total harmonic distortion: < 20 %
Power factor λ (full/minimum load at 230 V): 0.9C/ 0.95
ECG efficiency (full load at 230 V): 81 %
Device power losses (max): 3.5 W
Inrush current: < 10 A
Nominal output power: 14 W
Partial load: 5.4 - 14 W
Nominal output voltage: 27 - 40 V
Nominal output current: 200 / 250 / 300 / 350 mA (+/- 7.5%)
Max. ECG no. on circuit breaker 10 A (C): 132
Max. ECG no. on circuit breaker 10 A (B): 80
Max. ECG no. on circuit breaker 16 A (C): 212
Max. ECG no. on circuit breaker 16 A (B): 128
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 27-40 V
U-OUT (working voltage): 60 V
Output current tolerance: ±7.5 %
Output ripple current (100 Hz): < 5 %
Output PSTLM: ≤1
Output SVM: ≤0.4
Default output current: 350 mA
Galvanic isolation primary/secondary: SELV
Current set: DipSwitch

Dimensions & weight:
Product weight: 60 g
Cable cross-section, input side: 0.75 - 1.5 sqmm
Cable cross-section, output side: 0.75 - 1.5 sqmm
Wire preparation length, input side: 8-9 mm
Wire preparation length, output side: 8-9 mm
Length: 130 mm
Width: 30 mm
Height: 22.2 mm

Colors & materials:
Casing material: 80% recycled plastic

Temperatures & operating conditions:
Ambient temperature range: -20 +50 C
Temperature range at storage: -40 +85 C
Maximum temperature at tc test point: max. +70 C
Max.housing temperature in case of fault: 110 C
Permitted rel. humidity during operation: 5-85 %

Lifespan:
ECG lifetime (at Tcase = 70 C at Tc point/10-% failure rate): 35000 h
ECG lifetime (at Tcase = 60 C at Tc point/10-% failure rate): 50000 h

Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut (Leading edge/Trailing edge)
Dimming range: 5 - 100 %
Suitable for fixtures with prot. class: I / II
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Max. cable length to lamp/LED module: 2 m
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Push terminal
Type of connection, output side: Push terminal
Suitable for through-wiring:No
Number of channels: 1

Programming:
Programming device: DIPswitch

Certificates & standards:
Approval marks – approval: CCC / CE / UKCA / ENEC
Standards:
Acc. to IEC 61347-1/Acc. to IEC 61347-2-3/Acc. to IEC 62384/Acc. to IEC
61547/Acc. to IEC 61000-3-3/Acc. to EN 61000-3-2
Protection class: I,II
Type of protection: IP20

Logistical data:
Commodity code: 85044083900
Technical Information
Type of LED Driver Constant Current
Type of Control/Dimming Mains (Phase-cut)
Weight 60g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver OT FIT 14/220-240/350 CS PC Phasecut dimmable 4062172286503
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify