1U Black 22 1/16" Deep Sliding Rack Tray with Universal Fixing

Part No
R1290-600/1UK
CA$146.56
In stock
1U Black 22 1/16" Deep Sliding Rack Tray with Universal Equipment Fixing Points. 

Recommended Load Capacity 41.89lb
Technical Information
3D Model View 3D Drawing
Data Sheet Drawings
Load Capacity 19kg / 41.9lbs
Material 1.2mm Steel / 1/16"
Weight 4.58kg
Depth 56cm / 22"
Finish Black
Customer Questions
What is the R1290-600/1UK weight?
The weight of this product is 4.58kg / 10lbs.
Hi Can you tell me the width of the R1290-600/1UK draw please
The internal width of the tray is 417mm / 16.41 Inches
What is the amount of travel for this shelf?
This sliding rack shelf travels (slides out) 560mm / 22”. Thank you for your question! - The Penn Elcom Online Team
Can this be mounted in a rack with 33" depth?
Hi, Unfortunately this product (R1290-600/1UK) cannot reach a 33" / 838.2mm depth. The maximum distance that the front and rear brackets can be set to is 29" / 736.6mm. Regards Penn Elcom
Can it be mounted upside down to accomodate a console that is 17.5" wide and work normally?
Thank you for the question. Yes this R1290-600/1UK track tray can be mounted upside down to provide more surface area.
Does this product have a catch or latch to positively hold it in the closed position?
The R1290 rack trays have a soft close on the runners that hold the tray in position. It doesn't however operate as a hard close so if the tray is tipped/pulled it will release.
What is the minimum and maximum depth of the rails on the R1290-600/1UK?
Thank you for your enquiry, The minimum depth for the rails is 370mm / 14.5" maximum is 750mm / 29" Kind Regards Penn Elcom
What is the max weight this R1290-600/1UK shelf can support?
Thank you for your enquiry, The maximum load rating is 19kg / 41.89lbs Regards Penn Elcom
Did you find what you were looking for?
Write Your Own Review
You're reviewing:1U Black 22 1/16" Deep Sliding Rack Tray with Universal Fixing
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify