Led Oti Dali2 30/220-240/24 1 Channel Dim 4062172329767
Osram
Part No
LEDOTIDALI30CH1
£24.12
£20.10
In stock
OTi DALI 30/220-240/24 1CH
Versatile - easy control for dynamic light
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting to be ordered separately
Product family features:
CV Power supplies with DALI
Dimmable via Touch DIM
LED drivers whose output power can be shared arbitrarily
among the 2 or 4 channels (where multiple channels)
Dimming range: 0.1 or 1…100 %
Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits:
Intelligent power matching thanks to Smart power supply
Slim form factor for mounting on the cove or in linear luminaires
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Available as single-channel or multi-channel with DT6 and DT8 in one device
DALI message detection "LED Module failure"
Areas of application:
Cove lighting, wall washer, corridor, handrail, luminous ceilings
Suitable for use in luminaires of protection class I and II
Technical data:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 10 %
Power factor: λ 0.32…0.95
Efficiency in full-load: > 88 % (at 230V, 50 Hz)
Device power loss: 4.5 W
Networked standby power: <0.50 W (at 230V, 50 Hz)
Inrush current: 40 A
Max. ECG no. on circuit breaker 10 A (B): 20
Max. ECG no. on circuit breaker 10 A (C): 32
Max. ECG no. on circuit breaker 16 A (B): 31
Max. ECG no. on circuit breaker 16 A (C): 52
Max. ECG no. on circuit breaker 25 A (B): 81
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V (DC voltage)
U-OUT (working voltage): 24.2 V
Nominal output power: 30 W
Maximum output power: 30 W (at steady state)
Galvanic isolation: SELV
Input voltage: DC 176…276 V
Output PWM frequency: > 3000 Hz
Output ripple Voltage (100 Hz): < 1 %
Dimensions & weight:
Mounting hole spacing, length: 94.0 mm
Product weight: 155.00 g
Cable cross-section, input side: 0.5…1.5 mm²
Cable cross-section, output side: 0.5…1.5 mm²
Wire preparation length, input side: 7.0 mm
Wire preparation length, output side: 7.0 mm
Mounting hole spacing, width: 58.0 mm
Length: 103.0 mm
Width: 67.0 mm
Height: 29.5 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault : 110 °C
Temperature range at storage: -40…+85 °C
Permitted rel. humidity during operation: 5…85 % (Maximum 56 days/year at 85%)
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: DALI
Dimming range: 0…100 %
Dimming method: Pulse Width Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Plug-in connection
Type of connection, output side: Plug-in connection
Control interface: DALI-2
Number of channels: 1
Programming:
Tuner4TRONIC: Yes
Certificates & standards:
Approval marks – approval: CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM / UKCA
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015
Protection class: II
Type of protection: IP20
Logistical data:
Commodity code: 850440839000
Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 28-03-2023
Primary Article Identifier: 4062172329767
Candidate List Substance 1: Lead
CAS No. of substance: 1 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 00655979-2845-4498-83fd-fa3355affbc4
Versatile - easy control for dynamic light
Optional orange cable clamp B-style LEDOTCLAMPB, for independent mounting to be ordered separately
Product family features:
CV Power supplies with DALI
Dimmable via Touch DIM
LED drivers whose output power can be shared arbitrarily
among the 2 or 4 channels (where multiple channels)
Dimming range: 0.1 or 1…100 %
Line frequency: 0 Hz | 50 Hz | 60 Hz
Product family benefits:
Intelligent power matching thanks to Smart power supply
Slim form factor for mounting on the cove or in linear luminaires
No stroboscopic effect thanks to patented high PWM frequency management (> 2 kHz)
Suitable for installation in emergency lighting systems according to EN 60598-2-22
Available as single-channel or multi-channel with DT6 and DT8 in one device
DALI message detection "LED Module failure"
Areas of application:
Cove lighting, wall washer, corridor, handrail, luminous ceilings
Suitable for use in luminaires of protection class I and II
Technical data:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 10 %
Power factor: λ 0.32…0.95
Efficiency in full-load: > 88 % (at 230V, 50 Hz)
Device power loss: 4.5 W
Networked standby power: <0.50 W (at 230V, 50 Hz)
Inrush current: 40 A
Max. ECG no. on circuit breaker 10 A (B): 20
Max. ECG no. on circuit breaker 10 A (C): 32
Max. ECG no. on circuit breaker 16 A (B): 31
Max. ECG no. on circuit breaker 16 A (C): 52
Max. ECG no. on circuit breaker 25 A (B): 81
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V (DC voltage)
U-OUT (working voltage): 24.2 V
Nominal output power: 30 W
Maximum output power: 30 W (at steady state)
Galvanic isolation: SELV
Input voltage: DC 176…276 V
Output PWM frequency: > 3000 Hz
Output ripple Voltage (100 Hz): < 1 %
Dimensions & weight:
Mounting hole spacing, length: 94.0 mm
Product weight: 155.00 g
Cable cross-section, input side: 0.5…1.5 mm²
Cable cross-section, output side: 0.5…1.5 mm²
Wire preparation length, input side: 7.0 mm
Wire preparation length, output side: 7.0 mm
Mounting hole spacing, width: 58.0 mm
Length: 103.0 mm
Width: 67.0 mm
Height: 29.5 mm
Colors & materials:
Casing material: Plastic
Temperatures & operating conditions:
Ambient temperature range: -20…+45 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault : 110 °C
Temperature range at storage: -40…+85 °C
Permitted rel. humidity during operation: 5…85 % (Maximum 56 days/year at 85%)
Lifespan:
ECG lifetime: 50000 h
Capabilities:
Dimmable: Yes
Dimming interface: DALI
Dimming range: 0…100 %
Dimming method: Pulse Width Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Intended for no-load operation: No
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Plug-in connection
Type of connection, output side: Plug-in connection
Control interface: DALI-2
Number of channels: 1
Programming:
Tuner4TRONIC: Yes
Certificates & standards:
Approval marks – approval: CE / CCC / BIS / ENEC / EL / ENEC 25 / RCM / UKCA
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 60598-2-22/Acc. to EN 62386/Acc. to EN 55015
Protection class: II
Type of protection: IP20
Logistical data:
Commodity code: 850440839000
Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 28-03-2023
Primary Article Identifier: 4062172329767
Candidate List Substance 1: Lead
CAS No. of substance: 1 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 00655979-2845-4498-83fd-fa3355affbc4
Weight | 150g |
---|
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify