Osram Led Driver Ot Fit 36 /220-240/24 Pc Mains Dimmable 4062172237390

Osram Led Driver Ot Fit 36 /220-240/24 Pc Mains Dimmable for 24V LED strips

EAN: 4062172237390

Optional Orange Cable Clamp B-style LEDOTCLAMPB, for independent mounting, to be ordered separately.

Product family benefits:
IP rating: IP20
High efficiency
Very stable output power
High electronical reversible short-circuit, overload, overtemperature protection
Independent installation possible

Areas of application:
Suitable for luminaires of protection classes I and II
Hospitality – decorative lighting, night light
Restaurants – decorative lighting
Shops – decorative lighting, shelf lighting
Residential – cove lighting, under cabinet lighting

Technical spec:
Nominal input voltage: 220…240 V
Mains frequency: 50/60 HZ Hz
Input voltage AC: 198…264 V
Total harmonic distortion: < 15 %
Power factor λ: > 0.95
Efficiency in full-load: 85 %
Device power loss: 6.0 W
Inrush current: < 25 A
Max. ECG no. on circuit breaker 10 A (C): 33
Max. ECG no. on circuit breaker 10 A (B): 21
Max. ECG no. on circuit breaker 16 A (B): 33
Max. ECG no. on circuit breaker 16 A (C): 53
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 24.2 V
Nominal output power: 2.42...36.3 W
Maximum output power: 36.3 W
Galvanic isolation: SELV
Output PWM frequency: 3k Hz

Dimensions & weight:
Mounting hole spacing, length: 94.0 mm
Product weight: 162.00 g
Cable cross-section, input side: 0.5…1.5 mm²
Cable cross-section, output side: 0.75…1.5 mm²
Wire preparation length, input side: 7…8 mm
Wire preparation length, output side: 7…8 mm
Mounting hole spacing, width: 58.0 mm
Length: 103.0 mm
Height: 29.5 mm
Width: 67.0 mm

Colors & materials:
Casing material: Plastic

Temperatures & operating conditions:
Ambient temperature range: -20…+50 °C
Maximum temperature at tc test point: 80 °C
Max.housing temperature in case of fault: 110 °C
Temperature range at storage: -20…80 °C
Permitted rel. humidity during operation: 5…85 %

Lifespan:
ECG lifetime: 50000 h

Capabilities:
Dimmable: Yes
Dimming interface: Phase Cut
Dimming range: 3…100 %
Dimming method: PWM
Overheating protection: Yes
Overload protection: Yes
Short-circuit protection: Yes
No-load proof: Yes
Suitable for fixtures with prot. class: I
Type of connection, input side: Fixed connection (terminal)
Type of connection, output side: Fixed connection (terminal)
Number of channels: 1
Control interface: Trailing edge dimmer recommended

Programming:
Tuner4TRONIC: No

Certificates & standards:
Approval marks – approval: CE / ENEC / CCC / RCM / UKCA / EAC / SELV / CB
Standards: Acc. to EN 55015/Acc. to EN 60598-1/Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 61547/Acc. to EN 62384/CISPR 15/EN 55015
Protection class: II
Type of protection: IP20

Logistical data:
Commodity code: 850440829000

Environmental information:
Information according Art. 33 of EU Regulation (EC) 1907/2006 (REACh)
Date of Declaration: 14-04-2022
Primary Article Identifier: 4062172237390
Candidate List Substance 1: Lead
CAS No. of substance 1: 7439-92-1
Safe Use Instruction: The identification of the Candidate List substance is sufficient to allow safe use of the article.
Declaration No. in SCIP database: 640f7610-56c3-41a0-a29e-4b2ff0b07