Led Driver Ot Dali 40/220-240/1A0 NFC I 4062172115001

Osram

Part No
LEDOTDALI401A0NFCI
A$80.72
In stock
OTi DALI 40/220-240/1A0 NFC I

OPTOTRONIC Intelligent – DALI LT2 NFC - Compact constant current LED drivers

Output current can be setup via DALI (using the DALI MAGIC Usb Interface - LEDDALIMUSB) or NFC technology (via an Android device and the Osram Tuner4Tronic paid app or via an NFC programming tool)

Cable clamps included to allow independent installation

Product family benefits:
Versatile DALI window driver due to flexible output characteristic
Locking and unlocking of luminaire/driver data
Easy and fast output current setting via NFC
Very high efficiency
High-quality dimming of 1-100 % by amplitude dimming
DALI-2 certified incl. Parts 251, 252, 253

Areas of application:
Suitable for downlights, spotlights and LED panels
Suitable for use in luminaires with flexible current setting
Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
Suitable for indoor SELV installations
Suitable for luminaires of protection classes I and II

Electrical data:
EAN: 4062172115001
Nominal input voltage: 220-240 V
Mains frequency: 0/50/60 Hz
Input voltage AC: 198-264 V
Input voltage DC: 176-276 V
Total harmonic distortion (at full load): < 10 %
Power factor: >= 0.95
ECG efficiency (typical): 91 %
Power loss in stand-by mode: < 0.15 W
Inrush current: < 20 A
Max. ECG no. on circuit breaker 10 A (B): 20
Max. ECG no. on circuit breaker 16 A (B): 30
Surge capability (L/N-Ground): 2 kV
Surge capability (L-N): 1 kV
Nominal output voltage: 20-50 V
U-OUT (working voltage): 60 V
Nominal output current: 500-1050 mA
Default output current: 700 mA
Output current tolerance: +/- 5 %
Output PSTLM: <= 1
Output SVM: <= 0.4
Output ripple current (100 Hz): < 5 %
Nominal output power: 40 W
Partial load: 20-40W
Galvanic isolation: SELV
Current set: DALI / NFC
Mounting hole spacing, length: 186.5 mm
Product weight: 170 g
Cable cross-section, input side: 0.2-2.5 sqmm
Cable cross-section, output side 0.2-1.5 sqmm
Wire preparation length, input side: 7-8 mm
Wire preparation length, output side: 8-9 mm
Height: 32.0 mm
Length: 204.0 mm
Width: 50.0 mm
Casing material: Plastic
Ambient temperature range: -20 +50 C
Maximum temperature at tc test point: 85 C
Max.housing temperature in case of fault: 110 C
Temperature range at storage: -40 +85 C
Permitted rel. humidity during operation: 5-85 %
ECG lifetime: 50000 / 100000 h
Encapsulated: No
Suitable for through-looping: Yes
Dimmable: Yes
Dimming interface: DALI-2
Dimming range: 1-100 %
Dimming method: Amplitude Modulation
Overheating protection: Automatic reversible
Overload protection: Automatic reversible
Short-circuit protection: Automatic reversible
No-load proof: Yes
Max. cable length to lamp/LED module: 2.0 m
Suitable for fixtures with prot. class: I / II
Type of connection, input side: Screw terminal
Type of connection, output side: Push terminal
Number of channels: 1
Programming interface: DALI, NFC
Constant lumen function: Programmable
Tuner4TRONIC Field App: Yes
Box programming: Yes
Programming device: DALI / NFC
Tuner4TRONIC: Yes
DALI Settings: Yes
OEM Key: No
Configuration Lock: Yes
DALI-2 Luminaire Data: Yes
Emergency Mode: Yes
Dim to Dark: Yes
Soft Switch Off: Yes
Driver Guard: Yes
Constant Lumen: Yes
Lamp Operating Time: Yes
Approval marks – approval: CE / EL / DALI-2 / EAC
Standards: Acc. to EN 61347-1/Acc. to EN 61347-2-13/Acc. to EN 55015/Acc. to EN 61547/Acc. to EN 61000-3-2/Acc. to EN 62384/Acc. to EN 62386/Acc. to IEC 62386-101:Ed2/Acc. to IEC 62386-102:Ed2/Acc. to IEC 62386-207:Ed1
Protection class: II
Type of protection: IP20
Commodity code: 850440829000
Technical Information
Weight 170g
Customer Questions
No Questions
Did you find what you were looking for?
Write Your Own Review
You're reviewing:Led Driver Ot Dali 40/220-240/1A0 NFC I 4062172115001
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify