1U Rack Panels Punched for 8 x D-Series Connectors

Part No
R1269/1UK/08
1U Rack Panels Punched for 8 x Neutrik D-Series Connectors (XLR, Speakon, RJ45, etc.)

Keep your electronics organised and structured.

Technical Information
3D Model View 3D Drawing
Number of Connectors 8
Material 1.2mm Steel
Size (U) 1U
Weight 244g
Connectors D-Series
Finish Black
Customer Questions
Rather than the overall length of the entire panel, how long is the area containing the punched holes specifically? R1269/1UK/08
The measurement you require is 99.8mm / 3.92"
Are the screw holes threaded? If so what size screw will fit.
Hi The holes on R1269/1UK/08 are not threaded. If you mount the chassis connectors from the rear you can use - HSM3C12BP-100 And MFD Thanks Penn Elcom
what is the weight of this please?
Thank you for your question, The weight of the R1269/1UK/08 product is 0.24kg/0.54lb Many thanks Penn Elcom
are plugs/blanks available to cover unneeded punched-out holes.
Thank you for the question. There are different plug/blank options for the punch holes and these can be found in our accessories section: penn-elcom.com/cables-connectors/connectors/accessories
Are the holes punched exactly centred on the panel or are they offset to allow engraving above/below the hole?
Thank you for the question. These R1269/1UK/08 panels do have space to allow for letters/numbers above the holes. We offer a custom service to print on the panels with UV or laser etch.
Did you find what you were looking for?
Write Your Own Review
You're reviewing:1U Rack Panels Punched for 8 x D-Series Connectors
Your Rating
For price, stock availability and other information about this product, please contact us using the form below.
For price, stock availability and other information about this product, please contact us using the form below.

sgm_clp_1 div for segmentify