10A Large Black Power Dish (Vertical)
Part No
PDU10-PCFCV
£96.97
£80.81
In stock
10A Vertical Power Dish for Flight Case
Built to specifically fit into flight cases, the 10A Flight Case Power Dish (Vertical) was created for those who require power for additional equipment and access to electricity.
The power dish can be used for:
- Power distribution for mobile workstations including screen monitors and laptops
- Charging battery equipment
- Powering up-lighters, LED lighting or other external staging equipment within and outside the case
Created to be used in:
- Backstage settings
- Outdoor settings
- Mobile set-ups
- Pop-ups and exhibitions
The power dishes are easily mounted into any style of flight case, using the same technique as fitting a case handle or dish. There are horizontal (FCH) or vertical (FCV) mounting versions available.
The low profile dish gives you the option once fitted, via a PowerCon connector on the front of the dish/case delivering mains power in and through a 10amp thermal breaker to a side loaded IEC chassis socket out situated on the rear of the dish and once fitted situated on the inside of the case.
Technical Specifications
- PowerCon Input NAC3MPXXA
- 10A Thermal Breaker Switch
- 10amp IEC Output
- Dish Dimensions (OD): 178mm x 127mm x 68mm / 7.01" x 5" x 2.68"
- Hole Cutout Dimensions: 148mm x 96mm / 5.83" x 3.78"
- Available in two versions: Horizontal & Vertical
Built to specifically fit into flight cases, the 10A Flight Case Power Dish (Vertical) was created for those who require power for additional equipment and access to electricity.
The power dish can be used for:
- Power distribution for mobile workstations including screen monitors and laptops
- Charging battery equipment
- Powering up-lighters, LED lighting or other external staging equipment within and outside the case
Created to be used in:
- Backstage settings
- Outdoor settings
- Mobile set-ups
- Pop-ups and exhibitions
The power dishes are easily mounted into any style of flight case, using the same technique as fitting a case handle or dish. There are horizontal (FCH) or vertical (FCV) mounting versions available.
The low profile dish gives you the option once fitted, via a PowerCon connector on the front of the dish/case delivering mains power in and through a 10amp thermal breaker to a side loaded IEC chassis socket out situated on the rear of the dish and once fitted situated on the inside of the case.
Technical Specifications
- PowerCon Input NAC3MPXXA
- 10A Thermal Breaker Switch
- 10amp IEC Output
- Dish Dimensions (OD): 178mm x 127mm x 68mm / 7.01" x 5" x 2.68"
- Hole Cutout Dimensions: 148mm x 96mm / 5.83" x 3.78"
- Available in two versions: Horizontal & Vertical
| Dish Depth | 16mm |
|---|---|
| Material | 1.2mm Steel |
| Weight | 600g |
| Connectors | powerCON |
| Finish | Black |
Customer Questions
Write Your Own Review
For price, stock availability and other information about this product, please contact us using the form below.
sgm_clp_1 div for segmentify